106651-0140 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1066510140

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 106651-0140 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 106651-0140 1066510140

Service parts 106651-0140 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 106065-1020

3. GOVERNOR 105427-0070

4. SUPPLY PUMP 105217-4000

5. AUTOM. ADVANCE MECHANIS 105614-0350

6. COUPLING PLATE 105662-0680

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105100-4050

11. Nozzle and Holder 16600-96001

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4270

14. NOZZLE

105015-2780

15. NOZZLE SET

Include in #1:

106651-0140 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 106651-0140 1066510140

Zexel num

Bosch num

Firm num

Name

106651-0140
106651-0142

NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
PD6 *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-3-600

Overflow valve opening pressure kPa 157 123 191

Overflow valve opening pressure kgf/cm2 1.6 1.25 1.95

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.65 3.6 3.7

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 10.8

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 102.4 101.4 103.4

Max. variation between cylinders % 0 -4 4

Basic *

Fixing the lever *

Injection quantity adjustment_02

Adjusting point D

Rack position 7+-0.5

Pump speed r/min 225 225 225

Average injection quantity mm3/st. 11.7 10 13.4

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Timer adjustment

Pump speed r/min 300+-50

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 500

Advance angle deg. 1.35 0.7 1.6

Timer adjustment_03

Pump speed r/min 700

Advance angle deg. 2.85 2.1 3.1

Timer adjustment_04

Pump speed r/min 900

Advance angle deg. 4.4 3.6 4.6

Timer adjustment_05

Pump speed r/min 1150+50

Advance angle deg. 6.1 5.7 6.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Adjust with speed control lever at full position (minimum-maximum speed specification) (2)Adjust with the load control lever in the full position (variable speed specification). (3)Target notch: K (4)RACK LIMIT: RAL
----------
K=15 RAL=11.8+-0.1mm
----------