Fuel injectors
  1. Home
  2. injection
  3. #1047809960

Buy 104780-9960 ZEXEL F 01G 09W 0FS BOSCH INJECTION-PUMP ASSEMBLY f01g09w0fs 1047809960 16700na01a


104780-9960 INJECTION-PUMP ASSEMBLY
Rating:
8
Buy INJECTION-PUMP ASSEMBLY 104780-9960 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09W 0FS f01g09w0fs
ZEXEL 104780-9960 1047809960
NISSAN-DIESEL 16700NA01A 16700na01a

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below
Diesel VE Fuel Injection Pump 104680-9960 104780-9960 NP-VE4/10F1050RNP2614 16700NA01A Compatible For TD27
$970.00

11 Sep 2024
0.1102[0.05] Pounds
CN: tgyg7k
Diesel VE Fuel Injection Pump 104680-9960 104780-9960 NP-VE4/10F1050RNP2614 16700NA01A Compatible For TD27
ITGHKM Improve fuel economy: the amount and timing of fuel injection can be more precisely controlled, thus increasing fuel utilization and reducing energy consumption, which in turn improves fuel economy. || Reduced Emissions: Fuel injection technology can mix air and fuel more effectively, resulting in more complete combustion, reduced exhaust emissions and compliance with environmental standards. || Increase power output: higher combustion efficiency can be achieved, increasing the power output of the engine and better adapting to the power demand under different working conditions. || Reduced maintenance costs: Manufactured with advanced technology and materials, it has a longer service life and less maintenance needs, which can reduce maintenance costs and extend the service life of the equipment. || Compatible for TD27
Diesel Fuel Injection VE Pump Compatible For 104680-9960 NP-VE4/ Compatible For 10F1050RNP2614 16700NA01A Compatible For NISSAN
$1,165.77
 

16 May 2024
0.1102[0.05] Pounds
CN: chenmingxiangg
Diesel Fuel Injection VE Pump Compatible For 104680-9960 NP-VE4/ Compatible For 10F1050RNP2614 16700NA01A Compatible For NISSAN
ACLips Diesel Fuel Injection VE Pump Compatible For 104680-9960 NP-VE4/ Compatible For 10F1050RNP2614 16700NA01A Compatible For NISSAN || OEM NO. : 104680-9960 NP-VE4/10F1050RNP2614 16700NA01A || ☎ Manufacturing-tested for worry-free, out-of-the-box performance || ☎ units are designed to meet original equipment (OE) compatibility, form and function requirements || ☎ Longer service life and less clogging.
Diesel Fuel Injection Pump Compatible For 104780-9960 NP-VE4/compatible For 10F1050RNP2614 16700NA01A Compatible For NISSAN
$1,163.99
 

16 May 2024
0.1102[0.05] Pounds
CN: chenmingxiangg
Diesel Fuel Injection Pump Compatible For 104780-9960 NP-VE4/compatible For 10F1050RNP2614 16700NA01A Compatible For NISSAN
ACLips Diesel Fuel Injection Pump Compatible For 104780-9960 NP-VE4/compatible For 10F1050RNP2614 16700NA01A Compatible For NISSAN || OEM NO. : 104780-9960 NP-VE4/10F1050RNP2614 16700NA01A || ☎ Manufacturing-tested for worry-free, out-of-the-box performance || ☎ units are designed to meet original equipment (OE) compatibility, form and function requirements || ☎ Longer service life and less clogging.

Components :

0. INJECTION-PUMP ASSEMBLY 104780-9960
1. _
2. FUEL INJECTION PUMP
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1121
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2) 9.8(100)
10. NOZZLE-HOLDER 105078-0050
11. NOZZLE 105007-1130

Scheme ###:

PACKING RING
1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0020 SUPPLY PUMP
9. [1] 146103-0000 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-1720 ROLLER SET
24. [1] 146303-0100 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-5920 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146300-0000 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
33. [1] 146603-0700 SHIM
34. [1] 146302-3500 COMPRESSION SPRING
34B. [1] 146302-3400 COMPRESSION SPRING
34C. [1] 146302-3600 COMPRESSION SPRING
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-0800 O-RING
37. [1] 146310-0700 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
49. [2] 146234-0500 GUIDE PIN
50. [1] 146401-0520 HYDRAULIC HEAD
50. [1] 146401-0520 HYDRAULIC HEAD
50. [1] 146401-0520 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
54. [4] 146433-0100 GASKET
55. [4] 146430-0320 DELIVERY-VALVE ASSEMBLY VE4
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0220 FITTING
60. [4] 139106-0100 FLAT-HEAD SCREW
67. [1] 146822-3120 GOVERNOR COVER
67/1. [1] 146805-2120 GOVERNOR COVER
67/2. [1] 146515-0320 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [2] 139310-0200 PLAIN WASHER
67/4. [2] 139310-0200 PLAIN WASHER
67/5. [1] 146530-0000 CONTROL LEVER
67/5B. [1] 146530-0100 CONTROL LEVER STAMP 001
67/5C. [1] 146832-1500 CONTROL LEVER
67/5D. [1] 146832-1600 CONTROL LEVER
67/6. [2] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/6. [2] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/7. [1] 013020-6040 UNION NUT
67/8. [1] 146515-1820 LEVER SHAFT
67/9. [1] 146592-0400 COILED SPRING
67/10. [1] 146600-0200 O-RING
67/11. [1] 146602-0100 PLAIN WASHER
67/12. [1] 146540-4000 CONTROL LEVER
67/12B. [1] 146540-4100 CONTROL LEVER
67/13. [1] 146621-1700 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/15. [1] 146526-3400 BLEEDER SCREW
67/16. [1] 146526-6900 FLAT-HEAD SCREW
67/18. [1] 146594-0600 COILED SPRING
67/19. [1] 146541-0000 ANGLE PIECE
67/25. [2] 013020-6040 UNION NUT
67/25. [2] 013020-6040 UNION NUT
67/26. [1] 139006-0200 BLEEDER SCREW
67/78. [1] 146600-4400 SEAL RING
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-4600 THREADED PIN L=24MM
67/201B. [1] 146545-4700 THREADED PIN L=26MM
67/201C. [1] 146545-4800 THREADED PIN L=28MM
67/202. [1] 146598-5000 UNION NUT
67/203. [1] 146600-1200 O-RING
67/204. [1] 146545-4500 DAMPER
95. [1] 146861-0120 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-2600 PLAIN WASHER
115. [1] 146976-3800 SLIDING SLEEVE
116. [1] 146576-0400 CAP
117/1. [1] 146877-1020 PLUG L=5.2
117/1. [1] 146877-1120 PLUG L=5.3
117/1. [1] 146877-1220 PLUG L=5.4
117/1. [1] 146877-1320 PLUG L=5.5
117/1. [1] 146877-1420 PLUG L=5.6
117/1. [1] 146877-1520 PLUG L=5.7
117/1. [1] 146877-1620 PLUG L=5.8
117/1. [1] 146877-1720 PLUG L=5.9
117/1. [1] 146877-1820 PLUG L=6.0
117/1. [1] 146877-1920 PLUG L=6.1
117/1. [1] 146877-2020 PLUG L=6.2
117/1. [1] 146877-2120 PLUG L=6.3
117/1. [1] 146877-2220 PLUG L=6.4
117/1. [1] 146877-2320 PLUG L=6.5
117/1. [1] 146877-2420 PLUG L=6.6
117/1. [1] 146877-2520 PLUG L=6.7
117/1. [1] 146877-2620 PLUG L=6.8
120. [1] 146879-6920 RETAINING PIN
122. [1] 146580-3900 GOVERNOR SPRING
123. [4] 139106-0200 FLAT-HEAD SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE STAMP 02
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-0120 OVER FLOW VALVE
200. [1] 146206-0100 COILED SPRING
240. [1] 146650-0720 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146662-8320 WIRE
243. [1] 146621-4901 UNION NUT
246. [1] 027412-2440 EYE BOLT
410. [1] 014020-6140 PLAIN WASHER D11.5&6.5
411. [1] 146598-6300 CAP NUT
412. [1] 146598-6400 ADAPTOR
800S. [1] 146009-9220 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0320 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-7320 CAP
836S. [1] 146598-7420 CAP
837S. [1] 146598-7310 CAP
838S. [1] 146598-6710 CAP
906. [1] 146984-8400 NAMEPLATE
907. [1] 025803-1640 WOODRUFF KEY

Include in #2:

104780-9960 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09W 0FS f01g09w0fs
ZEXEL 104780-9960 1047809960
NISSAN-DIESEL 16700NA01A 16700na01a


Zexel num
Bosch num
Firm num
Name
104780-9960 
F 01G 09W 0FS 
16700NA01A  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD27 K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   47.4 46.9 47.9
Difference in delivery mm3/st.   3
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   45.2 42.7 47.7
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   48.1 48.1 48.1
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   47.4 46.4 48.4
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   47.9 44.4 51.4
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   33.1 30.1 36.1
Basic   *
Oil temperature degC   50 48 52
Injection quantity adjustment_02
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   5
Oil temperature degC   50 48 52
Injection quantity adjustment_03
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   33.1 29.6 36.6
Basic   *
Oil temperature degC   50 48 52
Injection quantity adjustment_04
Pump speed r/min   1285 1285 1285
Average injection quantity mm3/st.   15.2 15.2 15.2
Oil temperature degC   50 48 52
Governor adjustment
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   8.3 6.3 10.3
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   50 48 52
Governor adjustment_02
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   8.3 5.8 10.8
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   50 48 52
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   55 50 60
Basic   *
Oil temperature degC   48 46 50
Remarks
Full  
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   55 50 60
Oil temperature degC   48 46 50
Remarks
Full  
Speed control lever angle
Pump speed r/min   650 650 650
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   50 48 52
Remarks
Magnet OFF at idling position  
0000000901
Pump speed r/min   900 900 900
Overflow quantity cm3/min   410 280 540
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   900 900 900
Pressure kPa   392 363 421
Pressure kgf/cm2   4 3.7 4.3
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   700 700 700
Pressure kPa   343 304 382
Pressure kgf/cm2   3.5 3.1 3.9
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   900 900 900
Pressure kPa   392 353 431
Pressure kgf/cm2   4 3.6 4.4
Basic   *
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   900 900 900
Timer stroke mm   2 1.8 2.2
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   700 700 700
Timer stroke mm   1.2 0.6 1.8
Oil temperature degC   50 48 52
_03
Pump speed r/min   900 900 900
Timer stroke mm   2 1.6 2.4
Basic   *
Oil temperature degC   50 48 52
_04
Pump speed r/min   1250 1250 1250
Timer stroke mm   3.3 2.8 3.7
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   1.8 1.7 1.9
Control lever angle alpha deg.   14 10 18
Control lever angle beta deg.   23 18 28

Test data Ex:

0000001801 STOP LEVER ADJUSTMENT

Test data 104780-9960
Adjustment of the stop lever Adjust adjusting bolt (B) so that the starting injection quantity is within the standard. Fix using nut. (A) Adjusting nut (C) Starting injection quantity adjusting lever
----------

----------
L=15.0~18.5mm

0000001901 TAMPER PROOF

Test data 104780-9960
Tamperproof installation procedure A:Nut B:Nut C:Rubber vibration damper D:Nut L1:Inspection dimension Fig. 1 Maximum speed adjusting screw 1) Tighten nut (A) to the torque T1. 2) To prevent nut (A) from turning together, fix (A) using the tool, then tighten nut (B) to torque T1 Fig.2 Full load adjusting screw 1) Confirm the position of the rubber vibration damper (C) and then tighten nut (D) to the torque T2.
----------
L1=23~28mm T1=6~9N-m(0.6~0.9kgf-m) T2=7~9N-m(0.7~0.9kgf-m)
----------
L1=23~28mm




Have questions with 104780-9960?





Group cross 104780-9960 ZEXEL

Nissan-Diesel 

104780-9900  
9 460 614 803 
167002S520 
INJECTION-PUMP ASSEMBLY
TD27
104780-9910  
9 460 614 804 
167002S521 
INJECTION-PUMP ASSEMBLY
TD27
104780-9920  
9 460 614 805 
167002S563 
INJECTION-PUMP ASSEMBLY
TD27
104780-9950  
F 01G 09W 010 
16700NA00E 
INJECTION-PUMP ASSEMBLY
TD27
104780-9960  
F 01G 09W 0FS 
16700NA01A 
INJECTION-PUMP ASSEMBLY
TD27
104780-9970  

104780-9971 
F 01G 09W 0FT 
16700NA02A 
INJECTION-PUMP ASSEMBLY
TD27
104780-9971  
F 01G 09W 0FV 
16700NA02D 
INJECTION-PUMP ASSEMBLY
TD27
104780-9980  
 
16700NA02B 
INJECTION-PUMP ASSEMBLY
TD27
104780-9990  

104780-9991 
F 01G 09W 0FU 
16700NA02C 
INJECTION-PUMP ASSEMBLY
TD27
104780-9991  
F 01G 09W 0FW 
16700NA02E 
INJECTION-PUMP ASSEMBLY
TD27
Back to top