104761-4312 ZEXEL 9 460 614 219 BOSCH INJECTION-PUMP ASSEMBLY 9460614219 1047614312


104761-4312 INJECTION-PUMP ASSEMBLY
Rating:
80
Buy INJECTION-PUMP ASSEMBLY 104761-4312 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 614 219 9460614219
ZEXEL 104761-4312 1047614312

Components :

0. INJECTION-PUMP ASSEMBLY 104761-4312
1. _
2. FUEL INJECTION PUMP 104661-4312
3. NUMBER PLATE 146983-8700
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1221
8. Nozzle and Holder 16600-63G00
9. Open Pre:MPa(Kqf/cm2) 9.8{100}
10. NOZZLE-HOLDER 105078-0050
11. NOZZLE 105007-1210

Scheme ###:

1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0420 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0100 PLAIN WASHER
20. [1] 146210-7220 ROLLER SET
24. [1] 146303-0100 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0200 SLOTTED WASHER
29. [1] 146221-1920 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-6120 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-3600 COMPRESSION SPRING
34B. [1] 146312-1800 COMPRESSION SPRING
34C. [1] 146312-3400 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-4100 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0600 GUIDE PIN
50. [1] 146405-4220 HYDRAULIC HEAD
50. [1] 146405-4220 HYDRAULIC HEAD
50. [1] 146405-4220 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [6] 146433-0100 GASKET D12&6.4T1.00
55. [6] 146430-0020 DELIVERY-VALVE ASSEMBLY
56. [6] 146432-0801 COMPRESSION SPRING
58. [6] 146440-0220 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
67. [1] 146701-9020 MANIFOLD-PRESSURE COMP.
67/1. [1] 146805-3720 GOVERNOR COVER
67/2. [1] 146515-0220 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [1] 139310-0200 PLAIN WASHER
67/5. [1] 146832-8720 CONTROL LEVER
67/5B. [1] 146832-8820 CONTROL LEVER
67/6. [1] 014110-6440 LOCKING WASHER
67/7. [1] 146621-0700 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-3000 BLEEDER SCREW
67/18. [1] 146592-5000 COILED SPRING
67/19. [1] 146541-3000 BUSHING
67/21. [1] 146592-5100 COILED SPRING
67/22. [1] 146541-3100 SLOTTED WASHER
67/31. [1] 146710-0800 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-1700 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-1400 BUSHING
67/38. [1] 139506-0200 GASKET D8.9&6.8T1.00
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET D15.4&12.2T1.50
67/41. [1] 146713-4100 ADJUSTING PIN
67/42. [2] 146714-0000 PLATE
67/43. [1] 146715-0000 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT M6P1H3.6
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-0100 COILED SPRING
67/48/1. [1] 146720-0000 SPACER BUSHING L3.7
67/48/1. [1] 146720-0100 SPACER BUSHING L3.9
67/48/1. [1] 146720-0200 SPACER BUSHING L4.1
67/48/1. [1] 146720-0300 SPACER BUSHING L4.3
67/48/1. [1] 146720-0400 SPACER BUSHING L4.5
67/48/1. [1] 146720-0500 SPACER BUSHING L4.7
67/48/1. [1] 146720-0600 SPACER BUSHING L4.9
67/48/1. [1] 146720-0700 SPACER BUSHING L5.1
67/48/1. [1] 146720-0800 SPACER BUSHING L5.3
67/48/1. [1] 146720-0900 SPACER BUSHING L2.7
67/48/1. [1] 146720-1000 SPACER BUSHING L2.9
67/48/1. [1] 146720-1100 SPACER BUSHING L3.1
67/48/1. [1] 146720-1200 SPACER BUSHING L3.3
67/48/1. [1] 146720-1300 SPACER BUSHING L3.5
67/48/1. [1] 146720-1400 SPACER BUSHING L2.8
67/48/1. [1] 146720-1500 SPACER BUSHING L3.0
67/48/1. [1] 146720-1600 SPACER BUSHING L3.2
67/48/1. [1] 146720-1700 SPACER BUSHING L3.4
67/48/1. [1] 146720-1800 SPACER BUSHING L3.6
67/48/1. [1] 146720-1900 SPACER BUSHING L3.8
67/48/1. [1] 146720-2000 SPACER BUSHING L4.0
67/48/1. [1] 146720-2100 SPACER BUSHING L4.2
67/48/1. [1] 146720-2200 SPACER BUSHING L4.4
67/48/1. [1] 146720-2300 SPACER BUSHING L4.6
67/48/1. [1] 146720-2400 SPACER BUSHING L4.8
67/48/1. [1] 146720-2500 SPACER BUSHING L5.0
67/48/1. [1] 146720-2600 SPACER BUSHING L5.2
67/48/1. [1] 146720-2700 SPACER BUSHING L5.4
67/48/1. [1] 146720-2800 SPACER BUSHING L5.5
67/48/1. [1] 146720-2900 SPACER BUSHING L5.6
67/48/1. [1] 146720-4500 SPACER BUSHING L1.8
67/48/1. [1] 146720-4600 SPACER BUSHING L1.9
67/48/1. [1] 146720-4700 SPACER BUSHING L2.0
67/48/1. [1] 146720-4800 SPACER BUSHING L2.1
67/48/1. [1] 146720-4900 SPACER BUSHING L2.2
67/48/1. [1] 146720-5000 SPACER BUSHING L2.3
67/48/1. [1] 146720-5100 SPACER BUSHING L2.4
67/48/1. [1] 146720-5200 SPACER BUSHING L2.5
67/48/1. [1] 146720-5300 SPACER BUSHING L2.6
67/48/1. [1] 146725-2500 SPACER BUSHING L5.7
67/48/1. [1] 146725-2600 SPACER BUSHING L5.8
67/48/1. [1] 146725-2700 SPACER BUSHING L5.9
67/48/1. [1] 146725-2800 SPACER BUSHING L6.0
67/48/1. [1] 146725-2900 SPACER BUSHING L6.1
67/48/1. [1] 146725-3000 SPACER BUSHING L6.2
67/48/1. [1] 146725-3100 SPACER BUSHING L6.3
67/48/1. [1] 146725-3200 SPACER BUSHING L6.4
67/48/1. [1] 146725-3300 SPACER BUSHING L6.5
67/48/1. [1] 146725-3400 SPACER BUSHING L6.6
67/48/1. [1] 146725-3500 SPACER BUSHING L6.7
67/48/1. [1] 146725-3600 SPACER BUSHING L6.8
67/48/1. [1] 146725-3700 SPACER BUSHING L6.9
67/48/1. [1] 146725-3800 SPACER BUSHING L7.0
67/48/1. [1] 146725-3900 SPACER BUSHING L7.1
67/48/1. [1] 146725-4000 SPACER BUSHING L7.2
67/48/1. [1] 146725-4100 SPACER BUSHING L7.3
67/48/1. [1] 146725-4200 SPACER BUSHING L7.4
67/48/1. [1] 146725-4300 SPACER BUSHING L7.5
67/49. [1] 146721-4020 COVER
67/50. [1] 146722-0200 FLAT-HEAD SCREW
67/51. [1] 146600-0300 O-RING
67/53. [1] 013020-6040 UNION NUT M6P1H5
67/54. [4] 139006-4600 BLEEDER SCREW
67/54. [4] 139006-4600 BLEEDER SCREW
67/56. [1] 146723-0300 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET D9.9&6.2T1
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0600 CAPSULE
67/64. [1] 146927-2300 BRACKET
67/78. [1] 146600-4400 SEAL RING
67/96. [1] 146659-1600 CLAMPING BAND
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
95. [1] 146871-2420 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER D17&6.4T1.60
115. [1] 146975-4200 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
120. [1] 146879-1220 RETAINING PIN
122. [1] 146580-1000 GOVERNOR SPRING
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0620 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-5920 PULLING ELECTROMAGNET
137. [2] 139514-0200 GASKET
145. [1] 146621-4901 UNION NUT
147. [1] 146600-5000 O-RING
200. [1] 146206-0100 COILED SPRING
224. [1] 146927-2700 BRACKET
230. [1] 146935-0521 BRACKET
231. [1] 139006-4600 BLEEDER SCREW
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-1320 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 146621-4901 UNION NUT
244. [1] 020118-1440 BLEEDER SCREW
245. [2] 139512-0500 GASKET
246. [1] 027412-2440 EYE BOLT
247. [1] 146668-0120 PIPE
247. [1] 146668-0120 PIPE
251. [1] 014010-8140 PLAIN WASHER D18&8.5T1.6
309. [1] 020146-1270 BLEEDER SCREW
310. [1] 146685-6120 SWITCH
310/1. [1] 146685-6110 SWITCH
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146620-1500 FLAT-HEAD SCREW
310/4. [1] 013020-6040 UNION NUT M6P1H5
310/5. [1] 146614-2300 JOINT CONNECTION
310/6. [1] 146661-0401 BOOT
351. [1] 146125-0101 FILTER
352. [1] 146125-0200 COILED SPRING
800S. [1] 146019-4420 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-1520 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
812S. [1] 146600-1920 PARTS SET
821S. [1] 146210-7320 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
906. [1] 146983-8700 NAMEPLATE

Include in #2:

104761-4312 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 614 219 9460614219
ZEXEL 104761-4312 1047614312


Zexel num
Bosch num
Firm num
Name
104761-4312 
9 460 614 219 
   
INJECTION-PUMP ASSEMBLY
TD42T 11CK INJECTION PUMP ASSY VE6 VE
104761-4312 
104761-4313 
9 460 614 219 
16700WJ102  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD42T * K 11CK INJECTION PUMP ASSY VE6 VE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
(Solenoid timer adjustment condition)
With S/T O-ring; S/T OFF.
  OFF
Injection timing adjustment
Pump speed r/min   500 500 500
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   45.1 44.6 45.6
Basic   *
Oil temperature degC   48 46 50
Remarks
NA
 
Injection timing adjustment_02
Pump speed r/min   700 700 700
Boost pressure kPa   26.7 25.4 28
Boost pressure mmHg   200 190 210
Average injection quantity mm3/st.   54.3 53.8 54.8
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_03
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   56.7 56.2 57.2
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
Injection timing adjustment_04
Pump speed r/min   500 500 500
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   45.1 44.1 46.1
Basic   *
Oil temperature degC   48 46 50
Remarks
NA
 
Injection timing adjustment_05
Pump speed r/min   700 700 700
Boost pressure kPa   26.7 25.4 28
Boost pressure mmHg   200 190 210
Average injection quantity mm3/st.   54.3 53.3 55.3
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_06
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   56.7 55.7 57.7
Difference in delivery mm3/st.   5
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
Injection timing adjustment_07
Pump speed r/min   1250 1250 1250
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   58.4 55.4 61.4
Oil temperature degC   50 48 52
Injection timing adjustment_08
Pump speed r/min   1800 1800 1800
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   53 49 57
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   2300 2300 2300
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   17.8 15.8 19.8
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_02
Pump speed r/min   2500 2500 2500
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2300 2300 2300
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   17.8 15.3 20.3
Basic   *
Oil temperature degC   52 50 54
Governor adjustment
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   7.2 5.2 9.2
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   7.2 4.7 9.7
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   61.5 51.5 81.5
Basic   *
Oil temperature degC   48 46 50
Remarks
Full
 
Timer adjustment_02
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   61.5 51.5 81.5
Oil temperature degC   48 46 50
Remarks
Full
 
Speed control lever angle
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
Speed control lever angle_02
Pump speed r/min   250 250 250
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   5
Oil temperature degC   48 46 50
Remarks
Magnet OFF at full-load position
 
0000000901
Pump speed r/min   1250 1250 1250
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Overflow quantity cm3/min   440 310 570
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1250 1250 1250
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Pressure with S/T ON kPa   549 510 588
Pressure with S/T ON kgf/cm2   5.6 5.2 6
Pressure with S/T OFF kPa   441 412 470
Pressure with S/T OFF kgf/cm2   4.5 4.2 4.8
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
Stop lever angle_02
Pump speed r/min   1250 1250 1250
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Pressure with S/T OFF kPa   441 402 480
Pressure with S/T OFF kgf/cm2   4.5 4.1 4.9
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
Stop lever angle_03
Pump speed r/min   1700 1700 1700
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Pressure with S/T OFF kPa   588 549 627
Pressure with S/T OFF kgf/cm2   6 5.6 6.4
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1250 1250 1250
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T ON mm   4.6 4.2 5
Timer stroke with S/T OFF mm   3.1 2.9 3.3
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_02
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T OFF mm   2 1.5 2.5
Oil temperature degC   50 48 52
_03
Pump speed r/min   1250 1250 1250
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T ON mm   4.6 4.1 5.1
Timer stroke with S/T OFF mm   3.1 2.8 3.4
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_04
Pump speed r/min   1700 1700 1700
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T OFF mm   5.3 4.8 5.8
Oil temperature degC   50 48 52
_05
Pump speed r/min   2000 2000 2000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T ON mm   7 6.5 7.4
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   16 16 16
Test voltage V   25 24 26
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   6.76 6.66 6.86
MS dimension mm   1.3 1.2 1.4
BCS stroke mm   2.9 2.7 3.1
Pre-stroke mm   0.1 0.08 0.12
Control lever angle alpha deg.   55.5 51.5 59.5
Control lever angle beta deg.   38 33 43

Test data Ex:

0000001601 BOOST COMPENSATOR ADJUSTMENT

Test data 104761-4312
BCS adjustment procedure 1. At full boost pressure, set so that the full injection quantity is within the specifications (adjusting point). 2. Perform boost compensator intermediate operation point adjustment (pump speed N1, boost pressure P1). 3. When injection quantity at boost pressure P2 and pump speed N2 is not as specified, loosen nut (A) and adjust position of screw (B) so that injection quantity is as specified. The screw position should be within +-1 turn of initial position. 4. The nut tightening torque is T. 5. After completing adjustment, confirm that the NA-Q adjusting point is Q1.
----------
N1=700r/min N2=500r/min P1=26.7kPa(200mmHg) P2=0kPa(0mmHg) Q1=45.1+-1.0mm3/st T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)

0000001801 ACCELERATOR SWITCH ADJ

Test data 104761-4312
Adjustment of the accelerator switch ON - OFF changeover point: from idle to a (shim thickness L1) Idle-c: ON d ~ full: OFF (A): Position of the idle lever L:Shim thickness L1
----------
L1=(2.52+-0.05mm) a=5+-2deg c=5deg d=5deg
----------
L1=(2.52mm) a=5+-2deg b=(55+-4deg)




Have questions with 104761-4312?





Group cross 104761-4312 ZEXEL

9 460 613 534 
 
INJECTION-PUMP ASSEMBLY
TD42T
9 460 613 920 
 
INJECTION-PUMP ASSEMBLY
104761-4312  
9 460 614 219 
 
INJECTION-PUMP ASSEMBLY
TD42T

Nissan-Diesel 

104761-4312  

104761-4313 
9 460 614 219 
16700WJ102 
INJECTION-PUMP ASSEMBLY
TD42T
F 01G 09W 001 
16700WJ102 
INJECTION-PUMP ASSEMBLY
TD42T
Back to top