104761-4190 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047614190 167000y701

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104761-4190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104761-4190 1047614190

NISSAN-DIESEL 167000Y701 167000y701

Cross reference number

ZEXEL 104761-4190 1047614190

NISSAN-DIESEL 167000Y701 167000y701

Zexel num

Bosch num

Firm num

Name

104761-4190
104761-4191

167000Y701 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
TD42T * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 500 500 500

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 51.3 50.8 51.8

Basic *

Oil temperature degC 48 46 50

Remarks
NA

Injection timing adjustment_02

Pump speed r/min 700 700 700

Boost pressure kPa 16 14.7 17.3

Boost pressure kgf/cm2 0.16 0.146 0.174

Boost pressure mmHg 120 110 130

Average injection quantity mm3/st. 57.4 56.9 57.9

Basic *

Oil temperature degC 50 48 52

Remarks
CBS

Injection timing adjustment_03

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 56.7 56.2 57.2

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Remarks
Full

Injection timing adjustment_04

Pump speed r/min 500 500 500

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 51.3 50.3 52.3

Basic *

Oil temperature degC 48 46 50

Remarks
NA

Injection timing adjustment_05

Pump speed r/min 700 700 700

Boost pressure kPa 16 14.7 17.3

Boost pressure kgf/cm2 0.16 0.146 0.174

Boost pressure mmHg 120 110 130

Average injection quantity mm3/st. 57.4 56.4 58.4

Basic *

Oil temperature degC 50 48 52

Remarks
CBS

Injection timing adjustment_06

Pump speed r/min 1000 1000 1000

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 51.5 51.5 51.5

Oil temperature degC 50 48 52

Injection timing adjustment_07

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 56.7 55.7 57.7

Difference in delivery mm3/st. 5

Basic *

Oil temperature degC 50 48 52

Remarks
Full

Injection timing adjustment_08

Pump speed r/min 1800 1800 1800

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 59 59 59

Oil temperature degC 50 48 52

Injection timing adjustment_09

Pump speed r/min 2000 2000 2000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 56.5 56.5 56.5

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2300 2300 2300

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 24 22 26

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2500 2500 2500

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 5

Oil temperature degC 55 52 58

Injection quantity adjustment_03

Pump speed r/min 2300 2300 2300

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 24 21.5 26.5

Basic *

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 385 385 385

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 6.7 4.7 8.7

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 385 385 385

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 6.7 4.2 9.2

Difference in delivery mm3/st. 2.5

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 61.5 51.5 81.5

Basic *

Oil temperature degC 48 46 50

Timer adjustment_02

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 61.5 51.5 81.5

Oil temperature degC 48 46 50

Speed control lever angle

Pump speed r/min 350 350 350

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

Speed control lever angle_02

Pump speed r/min 250 250 250

Boost pressure kPa 0 0 0

Boost pressure kgf/cm2 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 5

Oil temperature degC 48 46 50

Remarks
Magnet OFF at full-load position

0000000901

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Overflow quantity with S/T ON cm3/min 520 390 650

Oil temperature degC 50 48 52

Remarks
Without S/T O-ring; S/T ON.

Stop lever angle

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Pressure with S/T ON kPa 451 412 490

Pressure with S/T ON kgf/cm2 4.6 4.2 5

Pressure with S/T OFF kPa 343 314 372

Pressure with S/T OFF kgf/cm2 3.5 3.2 3.8

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

Stop lever angle_02

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Pressure with S/T OFF kPa 343 304 382

Pressure with S/T OFF kgf/cm2 3.5 3.1 3.9

Basic *

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1700 1700 1700

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Pressure with S/T OFF kPa 569 530 608

Pressure with S/T OFF kgf/cm2 5.8 5.4 6.2

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Timer stroke with S/T ON mm 4.7 4.3 5.1

Timer stroke with S/T OFF mm 2.5 2.3 2.7

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

_02

Pump speed r/min 800 800 800

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Timer stroke with S/T OFF mm 0.9 0.4 1.4

Oil temperature degC 50 48 52

_03

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Timer stroke with S/T ON mm 4.7 4.2 5.2

Timer stroke with S/T OFF mm 2.5 2.2 2.8

Basic *

Oil temperature degC 50 48 52

_04

Pump speed r/min 1700 1700 1700

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Timer stroke with S/T OFF mm 7 6.5 7.4

Oil temperature degC 50 48 52

_05

Pump speed r/min 2000 2000 2000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Timer stroke with S/T OFF mm 7 6.5 7.4

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 38 37.5 38.5

Timer stroke TA mm 1.6 1.4 1.8

Timer stroke variation dT mm 0.9 0.9 0.9

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 38 37 39

Timer stroke TA mm 1.6 1.3 1.9

Basic *

Oil temperature degC 50 48 52

_03

Pump speed r/min 1000 1000 1000

Boost pressure kPa 53.3 52 54.6

Boost pressure kgf/cm2 0.54 0.526 0.554

Boost pressure mmHg 400 390 410

Average injection quantity mm3/st. 30 27.5 32.5

Timer stroke TA mm 0.7 0.3 1.1

Oil temperature degC 50 48 52

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 6.92 6.82 7.02

MS dimension mm 1.5 1.4 1.6

BCS stroke mm 1.5 1.3 1.7

Pre-stroke mm 0.1 0.08 0.12

Control lever angle alpha deg. 10 6 14

Control lever angle beta deg. 40 35 45

Test data Ex:

0000001601 BOOST COMPENSATOR ADJUSTMENT

BCS adjustment procedure 1. At full boost pressure, set so that the full injection quantity is within the specifications (adjusting point). 2. Perform boost compensator intermediate operation point adjustment (pump speed N1, boost pressure P1). 3. When injection quantity at boost pressure P2 and pump speed N2 is not as specified, loosen nut (A) and adjust position of screw (B) so that injection quantity is as specified. The screw position should be within +-1 turn of initial position. 4. The nut tightening torque is T.
----------
N1=700r/min N2=500r/min P1=16.0kPa(120mmHg) P2=0kPa(0mmHg) T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)

0000001801 POTENTIOMETER ADJUSTMENT

Potentiometer adjustment 1. Applied voltage: Vi 2. Boost pressure = P1 3. Set the control lever at the adjusting point. Position the dummy bolt against the lever and fix. 4. Assemble the potentiometer to obtain output voltage V1 at the fixed position. 5. After mounting the potentiometer, remove the dummy bolt. N:Pump speed Q:Injection quantity V:Output voltage C/L: control lever position F:Full-speed I:Idle A:Adjusting point
----------
V1=5.52+-0.03V P1=0kPa(0mmHg) Vi=10.0V
----------
N1=850r/min Q1=16.5+-1.0mm3/st V1=5.52+-0.03V V2=(1.60V) V3=(10V)