104760-4472 ZEXEL 9 460 613 135 BOSCH INJECTION-PUMP ASSEMBLY 9460613135 1047604472 1670051n71


104760-4472 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 104760-4472 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 613 135 9460613135
ZEXEL 104760-4472 1047604472
NISSAN 1670051N71 1670051n71

Components :

0. INJECTION-PUMP ASSEMBLY 104760-4472
1. _
2. FUEL INJECTION PUMP 104660-4471
3. NUMBER PLATE 146957-9700
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1121
8. Nozzle and Holder 16600-43G03
9. Open Pre:MPa(Kqf/cm2) 9.8{100}
10. NOZZLE-HOLDER 105078-0050
11. NOZZLE 105007-1130

Scheme ###:

1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0420 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-2720 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146221-0920 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-6120 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-2700 COMPRESSION SPRING
34B. [1] 146312-2800 COMPRESSION SPRING
34C. [1] 146312-2600 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
49. [2] 146234-0500 GUIDE PIN
50. [1] 146405-1920 HYDRAULIC HEAD
50. [1] 146405-1920 HYDRAULIC HEAD
50. [1] 146405-1920 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
54. [6] 146433-0100 GASKET
55. [6] 146430-3520 DELIVERY-VALVE ASSEMBLY VE35
56. [6] 146432-0000 COMPRESSION SPRING
58. [6] 146440-0220 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
67. [1] 146701-4021 MANIFOLD-PRESSURE COMP.
67/1. [1] 146805-3720 GOVERNOR COVER
67/2. [1] 146515-2520 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [1] 139310-0200 PLAIN WASHER
67/5. [1] 146536-7022 CONTROL LEVER
67/5B. [1] 146536-7122 CONTROL LEVER
67/6. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/7. [1] 146621-0700 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-3000 BLEEDER SCREW
67/18. [1] 146592-5000 COILED SPRING
67/19. [1] 146541-3000 BUSHING
67/21. [1] 146592-5100 COILED SPRING
67/22. [1] 146541-3100 SLOTTED WASHER
67/31. [1] 146710-0800 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-1700 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-1400 BUSHING
67/38. [1] 139506-0200 GASKET
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET
67/41. [1] 146713-4100 ADJUSTING PIN
67/42. [2] 146714-0000 PLATE
67/43. [1] 146715-0000 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-1400 COILED SPRING
67/48/1. [1] 146725-2500 SPACER BUSHING L5.7
67/48/1. [1] 146725-2600 SPACER BUSHING L5.8
67/48/1. [1] 146725-2700 SPACER BUSHING L5.9
67/48/1. [1] 146725-2800 SPACER BUSHING L6.0
67/48/1. [1] 146725-2900 SPACER BUSHING L6.1
67/48/1. [1] 146725-3000 SPACER BUSHING L6.2
67/48/1. [1] 146725-3100 SPACER BUSHING L6.3
67/48/1. [1] 146725-3200 SPACER BUSHING L6.4
67/48/1. [1] 146725-3300 SPACER BUSHING L6.5
67/48/1. [1] 146725-3400 SPACER BUSHING L6.6
67/48/1. [1] 146725-3500 SPACER BUSHING L6.7
67/48/1. [1] 146725-3600 SPACER BUSHING L6.8
67/48/1. [1] 146725-3700 SPACER BUSHING L6.9
67/49. [1] 146721-4020 COVER
67/50. [1] 146722-0200 FLAT-HEAD SCREW
67/51. [1] 146600-0300 O-RING
67/53. [1] 013020-6040 UNION NUT
67/54. [2] 139006-4600 BLEEDER SCREW
67/55. [2] 146620-6100 BLEEDER SCREW
67/56. [1] 146723-0300 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0600 CAPSULE
67/64. [1] 146927-2300 BRACKET
67/78. [1] 146600-4400 SEAL RING
67/99. [2] 010006-0870 BLEEDER SCREW
67/100. [1] 146931-8620 BRACKET
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
95. [1] 146861-3020 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0420 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146975-9600 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
120. [1] 146579-3220 RETAINING PIN
122. [1] 146580-1000 GOVERNOR SPRING
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0620 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-5420 PULLING ELECTROMAGNET
137. [2] 139514-0200 GASKET
145. [1] 146621-1000 UNION NUT
147. [1] 146600-5000 O-RING
200. [1] 146206-0100 COILED SPRING
224. [1] 146927-2700 BRACKET
230. [1] 146932-4220 BRACKET
231. [1] 139006-4600 BLEEDER SCREW
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-0720 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146658-6420 WIRE
243. [1] 146621-1000 UNION NUT
244. [1] 020118-1440 BLEEDER SCREW
245. [2] 139512-0500 GASKET
246. [1] 027412-2440 EYE BOLT
247. [1] 146665-1220 PIPE
251. [1] 014010-8140 PLAIN WASHER
309. [1] 020146-1270 BLEEDER SCREW
310. [1] 146673-7521 POTENTCIOMETER
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146620-1500 FLAT-HEAD SCREW
310/4. [1] 013020-6040 UNION NUT
310/5. [1] 146614-2300 JOINT CONNECTION
351. [1] 146125-0101 FILTER
352. [1] 146125-0200 COILED SPRING
800S. [1] 146018-0420 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
812S. [1] 146600-1920 PARTS SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
847S. [1] 146683-8910 POTENTCIOMETER
906. [1] 146957-9700 NAMEPLATE

Include in #2:

104760-4472 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 613 135 9460613135
ZEXEL 104760-4472 1047604472
NISSAN 1670051N71 1670051n71


Zexel num
Bosch num
Firm num
Name
104760-4472 
9 460 613 135 
1670051N71  NISSAN
INJECTION-PUMP ASSEMBLY
TD42 K 11CK INJECTION PUMP ASSY VE6 VE
104760-4472 
9 460 613 135 
1670051N71  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
TD42 K 11CK INJECTION PUMP ASSY VE6 VE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
(Solenoid timer adjustment condition)
With S/T O-ring; S/T OFF.
  OFF
Injection timing adjustment
Pump speed r/min   500 500 500
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   45.7 45.2 46.2
Basic   *
Oil temperature degC   48 46 50
Remarks
NA
 
Injection timing adjustment_02
Pump speed r/min   700 700 700
Boost pressure kPa   16 14.7 17.3
Boost pressure mmHg   120 110 130
Average injection quantity mm3/st.   53.1 52.6 53.6
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_03
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   57.7 57.2 58.2
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   500 500 500
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   45.7 44.7 46.7
Basic   *
Oil temperature degC   48 46 50
Injection timing adjustment_05
Pump speed r/min   700 700 700
Boost pressure kPa   16 14.7 17.3
Boost pressure mmHg   120 110 130
Average injection quantity mm3/st.   53.1 52.1 54.1
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_06
Pump speed r/min   1000 1000 1000
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   50.5 48 53
Oil temperature degC   50 48 52
Injection timing adjustment_07
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   57.7 56.7 58.7
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_08
Pump speed r/min   2000 2000 2000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   60.5 58 63
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   2300 2300 2300
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   18.3 16.3 20.3
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_02
Pump speed r/min   2500 2500 2500
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2100 2100 2100
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   55.2 50.7 59.7
Oil temperature degC   52 50 54
Injection quantity adjustment_04
Pump speed r/min   2300 2300 2300
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   18.3 15.8 20.8
Basic   *
Oil temperature degC   52 50 54
Governor adjustment
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   12.5 10.5 14.5
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   12.5 10 15
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   58 48 78
Basic   *
Oil temperature degC   48 46 50
Remarks
Full
 
Timer adjustment_02
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   58 48 78
Oil temperature degC   48 46 50
Remarks
Full
 
Speed control lever angle
Pump speed r/min   350 350 350
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Overflow quantity with S/T ON cm3/min   420 290 550
Oil temperature degC   50 48 52
Remarks
With an O-ring
 
_02
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Overflow quantity with S/T ON cm3/min   564 434 694
Oil temperature degC   50 48 52
Remarks
Without an O-ring
 
Stop lever angle
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Pressure with S/T ON kPa   431 392 470
Pressure with S/T ON kgf/cm2   4.4 4 4.8
Pressure with S/T OFF kPa   333 304 362
Pressure with S/T OFF kgf/cm2   3.4 3.1 3.7
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Pressure with S/T OFF kPa   333 294 372
Pressure with S/T OFF kgf/cm2   3.4 3 3.8
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   1700 1700 1700
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Pressure with S/T OFF kPa   549 510 588
Pressure with S/T OFF kgf/cm2   5.6 5.2 6
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T ON mm   4.8 4.4 5.2
Timer stroke with S/T OFF mm   2.6 2.4 2.8
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   800 800 800
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T OFF mm   1.1 0.6 1.6
Oil temperature degC   50 48 52
_03
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T ON mm   4.8 4.3 5.3
Timer stroke with S/T OFF mm   2.6 2.3 2.9
Basic   *
Oil temperature degC   50 48 52
_04
Pump speed r/min   1700 1700 1700
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T OFF mm   7 6.5 7.4
Oil temperature degC   50 48 52
_05
Pump speed r/min   2000 2000 2000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Timer stroke with S/T OFF mm   7 6.5 7.4
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   38 37.5 38.5
Timer stroke TA mm   2.3 2.3 2.3
Timer stroke variation dT mm   0.3 0.1 0.5
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   38 37 39
Timer stroke variation dT mm   0.3 0 0.6
Basic   *
Oil temperature degC   50 48 52
_03
Pump speed r/min   1000 1000 1000
Boost pressure kPa   53.3 52 54.6
Boost pressure mmHg   400 390 410
Average injection quantity mm3/st.   26 23.5 28.5
Timer stroke variation dT mm   0.8 0.4 1.2
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   6.64 6.54 6.74
MS dimension mm   1 0.9 1.1
BCS stroke mm   1.8 1.6 2
Control lever angle alpha deg.   10 6 14
Control lever angle beta deg.   40 35 45

Test data Ex:

0000001601 BOOST COMPENSATOR ADJUSTMENT

Test data 104760-4472
BCS adjustment procedure 1. At full boost pressure, set so that the full injection quantity is within the specifications (adjusting point). 2. Perform boost compensator intermediate operation point adjustment (pump speed N1, boost pressure P1). 3. When injection quantity at boost pressure P2 and pump speed N2 is not as specified, loosen nut (A) and adjust position of screw (B) so that injection quantity is as specified. The screw position should be within +-1 turn of initial position. 4. The nut tightening torque is T.
----------
N1=700r/min N2=500r/min P1=16.0kPa(120mmHg) P2=0kPa(0mmHg) T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104760-4472
Potentiometer adjustment 1. Applied voltage: Vi 2. Boost pressure = P1 3. Set the control lever at the adjusting point. Position the dummy bolt against the lever and fix. 4. Assemble the potentiometer to obtain output voltage V1 at the fixed position. 5. After mounting the potentiometer, remove the dummy bolt. A:Performance standards B:ON, OFF switch standard N:Pump speed Q:Injection quantity V:Output voltage C/L: control lever position I:Idle F:Full speed D:OFF-->ON E:OFF-->ON G:Adjusting point
----------
Vi=10.0V P1=0kPa(0mmHg) V1=3.3+-0.03V
----------
N1=700r/min Q1=24.7+-1.0mm3/st V1=3.3+-0.03V V2=1.48+0.08-0.6V V3=(8.14+-0.74V) C1=(5.6+4.4-2.6deg) C2=(21.2+-3.9deg)




Have questions with 104760-4472?





Group cross 104760-4472 ZEXEL

Nissan-Diesel 

 
1670051N14 
INJECTION-PUMP ASSEMBLY
TD42

Nissan 

 
1670051N15 
INJECTION-PUMP ASSEMBLY
TD42

Nissan-Diesel 

 
1670051N15 
INJECTION-PUMP ASSEMBLY
TD42

Nissan 

104760-4472  
9 460 613 135 
1670051N71 
INJECTION-PUMP ASSEMBLY
TD42

Nissan-Diesel 

104760-4472  
9 460 613 135 
1670051N71 
INJECTION-PUMP ASSEMBLY
TD42
Back to top