Rating:
Information injection-pump assembly
BOSCH
9 460 611 996
9460611996
ZEXEL
104760-2690
1047602690
NISSAN
167001P802
167001p802
Components :
0. | INJECTION-PUMP ASSEMBLY | 104760-2690 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104660-2690 |
3. | NUMBER PLATE | 146980-0700 |
4. | _ | |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | 146679-0520 |
7. | NOZZLE AND HOLDER ASSY | 105141-2991 |
8. | Nozzle and Holder | 16600-84T07 |
9. | Open Pre:MPa(Kqf/cm2) | 12.7{130} |
10. | NOZZLE-HOLDER | 105071-0681 |
11. | NOZZLE | 105000-2200 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0220 | SUPPLY PUMP |
9. | [1] | 146103-0100 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0420 | DRIVE SHAFT |
12/1. | [1] | 146200-0400 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-3420 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146221-1120 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146311-8620 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
34. | [1] | 146312-3900 | COMPRESSION SPRING |
34B. | [1] | 146312-4000 | COMPRESSION SPRING |
35/1. | [1] | 146690-3200 | SHIM D11.5&9.4T0.1 |
35/1. | [1] | 146690-3300 | SHIM D11.5&9.4T0.2 |
35/1. | [1] | 146690-3400 | SHIM D11.5&9.4T0.25 |
35/1. | [1] | 146690-3500 | SHIM D11.5&9.4T1.0 |
35/1. | [1] | 146690-4100 | SHIM D11.5&9.4T2 |
35/1. | [1] | 146690-4200 | SHIM D11.5&9.4T0.5 |
35/1. | [1] | 146690-4300 | SHIM D11.5&9.4T0.75 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-4020 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
41. | [1] | 146312-4100 | COMPRESSION SPRING |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM |
48/1. | [1] | 146690-5900 | SHIM |
48/1. | [1] | 146690-6000 | SHIM |
48/1. | [1] | 146690-6100 | SHIM |
48/1. | [1] | 146690-6200 | SHIM |
48/1. | [1] | 146690-6300 | SHIM |
48/1. | [1] | 146690-6400 | SHIM |
48/1. | [1] | 146690-6500 | SHIM |
48/1. | [1] | 146690-6600 | SHIM |
48/1. | [1] | 146690-6700 | SHIM |
48/1. | [1] | 146690-6800 | SHIM |
48/1. | [1] | 146690-6900 | SHIM |
48/1. | [1] | 146690-7000 | SHIM |
48/1. | [1] | 146690-7100 | SHIM |
48/1. | [1] | 146690-7200 | SHIM |
48/1. | [1] | 146690-7300 | SHIM |
48/1. | [1] | 146690-7400 | SHIM |
48/1. | [1] | 146690-7500 | SHIM |
48/1. | [1] | 146690-7800 | SHIM |
49. | [2] | 146234-0600 | GUIDE PIN |
50. | [1] | 146405-2720 | HYDRAULIC HEAD |
50. | [1] | 146405-2720 | HYDRAULIC HEAD |
50. | [1] | 146405-2720 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [6] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [6] | 146430-4620 | DELIVERY-VALVE ASSEMBLY |
56. | [6] | 146432-0000 | COMPRESSION SPRING |
58. | [6] | 146440-2720 | FITTING |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146503-8620 | GOVERNOR COVER |
67/1. | [1] | 146805-8020 | GOVERNOR COVER |
67/14. | [1] | 146621-1700 | UNION NUT |
67/16. | [1] | 146526-3400 | BLEEDER SCREW |
67/78. | [1] | 146600-4400 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-3400 | THREADED PIN L53.00 |
67/201B. | [1] | 146545-3500 | THREADED PIN L55.00 |
67/201C. | [1] | 146545-3600 | THREADED PIN L57.00 |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146514-4520 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146831-0220 | CONTROL LEVER |
72B. | [1] | 146831-0320 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT M6P1H5 |
95. | [1] | 146861-1020 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146975-4200 | SLIDING SLEEVE |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-1800 | PLUG L2.10 |
117/1. | [1] | 146577-1900 | PLUG L2.30 |
117/1. | [1] | 146577-2000 | PLUG L2.50 |
117/1. | [1] | 146577-2100 | PLUG L2.70 |
117/1. | [1] | 146577-2200 | PLUG L2.90 |
117/1. | [1] | 146577-2300 | PLUG L3.10 |
117/1. | [1] | 146577-2400 | PLUG L3.30 |
117/1. | [1] | 146577-2500 | PLUG L3.50 |
117/1. | [1] | 146577-2600 | PLUG L3.70 |
117/1. | [1] | 146577-2700 | PLUG L3.90 |
117/1. | [1] | 146577-2800 | PLUG L4.10 |
117/1. | [1] | 146577-2900 | PLUG L4.30 |
117/1. | [1] | 146577-3000 | PLUG L4.50 |
117/1. | [1] | 146577-3100 | PLUG L4.70 |
117/1. | [1] | 146577-3200 | PLUG L4.90 |
117/1. | [1] | 146577-3300 | PLUG L5.10 |
117/1. | [1] | 146577-6700 | PLUG L2.2 |
117/1. | [1] | 146577-6800 | PLUG L2.4 |
117/1. | [1] | 146577-6900 | PLUG L2.6 |
117/1. | [1] | 146577-7000 | PLUG L2.8 |
117/1. | [1] | 146577-7100 | PLUG L3.0 |
117/1. | [1] | 146577-7200 | PLUG L3.2 |
117/1. | [1] | 146577-7300 | PLUG L3.4 |
117/1. | [1] | 146577-7400 | PLUG L3.6 |
117/1. | [1] | 146577-7500 | PLUG L3.8 |
117/1. | [1] | 146577-7600 | PLUG L4.0 |
117/1. | [1] | 146577-7700 | PLUG L4.2 |
117/1. | [1] | 146577-7800 | PLUG L4.4 |
117/1. | [1] | 146577-7900 | PLUG L4.6 |
117/1. | [1] | 146577-8000 | PLUG L4.8 |
117/1. | [1] | 146577-8100 | PLUG L5.0 |
117/1. | [1] | 146877-0000 | PLUG L5.2 |
117/1. | [1] | 146877-0100 | PLUG L5.3 |
117/1. | [1] | 146877-0200 | PLUG L5.4 |
117/1. | [1] | 146877-0300 | PLUG L5.5 |
117/1. | [1] | 146877-4700 | PLUG |
117/1. | [1] | 146877-4800 | PLUG |
117/1. | [1] | 146877-4900 | PLUG |
117/1. | [1] | 146877-5000 | PLUG |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0220 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146650-6020 | PULLING ELECTROMAGNET |
136B. | [1] | 146650-5420 | PULLING ELECTROMAGNET |
136C. | [1] | 146650-6320 | PULLING ELECTROMAGNET |
137. | [2] | 139514-0200 | GASKET |
145. | [1] | 146621-1000 | UNION NUT |
147. | [1] | 146600-5000 | O-RING |
200. | [1] | 146206-0100 | COILED SPRING |
214. | [1] | 146542-5000 | BUSHING |
216. | [1] | 146542-5100 | BUSHING |
217. | [1] | 146541-3100 | SLOTTED WASHER |
218. | [1] | 146592-5600 | COILED SPRING |
219. | [1] | 146541-3000 | BUSHING |
220. | [1] | 146592-5700 | COILED SPRING |
221. | [1] | 146627-4420 | BRACKET |
224. | [1] | 146925-0300 | BRACKET |
240. | [1] | 146650-0720 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
243. | [1] | 146621-1000 | UNION NUT |
245. | [3] | 139512-0200 | GASKET D18.5&12.2T1.00 |
246. | [1] | 139812-0500 | EYE BOLT |
247. | [1] | 146666-5221 | PIPE |
248. | [1] | 146614-0200 | SPACER BUSHING |
275. | [1] | 146612-5020 | BRACKET |
276. | [2] | 010010-1640 | BLEEDER SCREW M10P1.5L16 4T |
280. | [1] | 146361-1020 | START ADVANCE ASSY |
281. | [1] | 146600-0800 | O-RING |
282. | [2] | 010206-1240 | HEX-SOCKET-HEAD CAP SCREW M6P1L12 |
287. | [1] | 020146-1440 | BLEEDER SCREW M6P1L14 |
309. | [1] | 020146-1440 | BLEEDER SCREW M6P1L14 |
311. | [2] | 010206-1040 | HEX-SOCKET-HEAD CAP SCREW |
318. | [1] | 146930-9720 | BRACKET |
320. | [3] | 020146-2040 | BLEEDER SCREW M6P1.0L20 4T |
330. | [1] | 146927-0600 | PLATE |
331. | [2] | 020106-1040 | BLEEDER SCREW M6P1L12 |
800S. | [1] | 146019-3520 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-0720 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
821S. | [1] | 146210-5720 | ROLLER SET |
835S. | [1] | 146598-1000 | CAP |
836S/1. | [1] | 146598-0600 | CAP L18 |
836S/1. | [1] | 146598-0700 | CAP L21 |
836S/1. | [1] | 146598-0800 | CAP L24 |
836S/1. | [1] | 146598-0900 | CAP L27 |
905. | [1] | 146679-0520 | ACTUATOR |
906. | [1] | 146980-0700 | NAMEPLATE |
916. | [1] | 146662-3020 | WIRE |
924. | [1] | 146680-5320 | DAMPER |
936. | [1] | 146684-4420 | POTENTCIOMETER |
936/2. | [1] | 146930-6600 | BRACKET |
936/3. | [2] | 139104-0400 | FLAT-HEAD SCREW |
936/4. | [1] | 146649-0400 | JOINT CONNECTION |
936/4B. | [1] | 146649-0500 | JOINT CONNECTION |
936/4C. | [1] | 146649-0600 | JOINT CONNECTION |
936/4D. | [1] | 146649-0700 | JOINT CONNECTION |
936/4E. | [1] | 146649-0800 | JOINT CONNECTION |
936/4F. | [1] | 146649-0900 | JOINT CONNECTION |
936/4G. | [1] | 146649-1000 | JOINT CONNECTION |
936/4H. | [1] | 146649-1100 | JOINT CONNECTION |
936/4I. | [1] | 146649-1200 | JOINT CONNECTION |
936/4J. | [1] | 146649-1300 | JOINT CONNECTION |
936/4K. | [1] | 146649-1400 | JOINT CONNECTION |
936/4L. | [1] | 146649-1500 | JOINT CONNECTION |
937. | [1] | 146930-4720 | BRACKET |
938. | [2] | 139006-4800 | BLEEDER SCREW |
939. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
947S. | [1] | 146684-4310 | POTENTCIOMETER |
Include in #2:
104760-2690
as INJECTION-PUMP ASSEMBLY
Cross reference number
BOSCH
9 460 611 996
9460611996
ZEXEL
104760-2690
1047602690
NISSAN
167001P802
167001p802
Zexel num
Bosch num
Firm num
Name
104760-2690
9 460 611 996
167001P802 NISSAN
INJECTION-PUMP ASSEMBLY
RD28 * K 11CK VE6 VE
RD28 * K 11CK VE6 VE
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113orSAEJ967d
1404 Test oil ISO4113orSAEJ967d
Test oil temperature
degC
45
45
50
Nozzle
105780-0060
Bosch type code
NP-DN0SD1510
Nozzle holder
105780-2150
Opening pressure
MPa
13
13
13.3
Opening pressure
kgf/cm2
133
133
136
Injection pipe
157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450
Inside diameter - outside diameter - length (mm) mm 2-6-450
Joint assembly
157641-4720
Tube assembly
157641-4020
Transfer pump pressure
kPa
20
20
20
Transfer pump pressure
kgf/cm2
0.2
0.2
0.2
Direction of rotation (viewed from drive side)
Right R
Right R
(Solenoid timer adjustment condition)
With S/T O-ring; S/T ON. ON
With S/T O-ring; S/T ON. ON
Injection timing adjustment
Pump speed
r/min
700
700
700
Average injection quantity
mm3/st.
29.3
28.9
29.7
Difference in delivery
mm3/st.
2
Basic
*
Oil temperature
degC
50
48
52
Injection timing adjustment_02
Pump speed
r/min
700
700
700
Average injection quantity
mm3/st.
29.3
28.3
30.3
Difference in delivery
mm3/st.
2.5
Basic
*
Oil temperature
degC
50
48
52
Injection timing adjustment_03
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
28.9
26.9
30.9
Oil temperature
degC
50
48
52
Injection timing adjustment_04
Pump speed
r/min
1200
1200
1200
Average injection quantity
mm3/st.
29.9
27.9
31.9
Oil temperature
degC
50
48
52
Injection timing adjustment_05
Pump speed
r/min
1800
1800
1800
Average injection quantity
mm3/st.
31.1
28.1
34.1
Oil temperature
degC
50
48
52
Injection timing adjustment_06
Pump speed
r/min
2300
2300
2300
Average injection quantity
mm3/st.
32.4
29.4
35.4
Oil temperature
degC
52
50
54
Injection timing adjustment_07
Pump speed
r/min
2500
2500
2500
Average injection quantity
mm3/st.
32.3
28.8
35.8
Oil temperature
degC
55
52
58
Injection quantity adjustment
Pump speed
r/min
2600
2600
2600
Average injection quantity
mm3/st.
27
25
29
Difference in delivery
mm3/st.
4.5
Basic
*
Oil temperature
degC
55
52
58
Injection quantity adjustment_02
Pump speed
r/min
2600
2600
2600
Average injection quantity
mm3/st.
27
24.5
29.5
Difference in delivery
mm3/st.
5
Basic
*
Oil temperature
degC
55
52
58
Injection quantity adjustment_03
Pump speed
r/min
2800
2800
2800
Average injection quantity
mm3/st.
8
Oil temperature
degC
55
52
58
Governor adjustment
Pump speed
r/min
290
290
290
Average injection quantity
mm3/st.
11
10
12
Difference in delivery
mm3/st.
0.9
Basic
*
Oil temperature
degC
48
46
50
Governor adjustment_02
Pump speed
r/min
290
290
290
Average injection quantity
mm3/st.
11
9
13
Difference in delivery
mm3/st.
1.6
Basic
*
Oil temperature
degC
48
46
50
Governor adjustment_03
Pump speed
r/min
500
500
500
Average injection quantity
mm3/st.
7
Oil temperature
degC
50
48
52
Boost compensator adjustment
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
17
10.5
23.5
Oil temperature
degC
50
48
52
Lever angle (shim thickness)
mm
4.6
4.55
4.65
Boost compensator adjustment_02
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
10.4
3.4
17.4
Oil temperature
degC
50
48
52
Lever angle (shim thickness)
mm
4.6
4.55
4.65
Timer adjustment
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
35
35
Basic
*
Oil temperature
degC
48
46
50
Remarks
Full
Full
Timer adjustment_02
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
35
35
Oil temperature
degC
48
46
50
Speed control lever angle
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
0
0
0
Oil temperature
degC
50
48
52
Remarks
Magnet OFF at full-load position
Magnet OFF at full-load position
Speed control lever angle_02
Pump speed
r/min
290
290
290
Average injection quantity
mm3/st.
6
Oil temperature
degC
48
46
50
Remarks
Magnet OFF at idling position
Magnet OFF at idling position
0000000901
Pump speed
r/min
900
900
900
Overflow quantity with S/T ON
cm3/min
465
335
595
Oil temperature
degC
50
48
52
Stop lever angle
Pump speed
r/min
900
900
900
Pressure with S/T ON
kPa
373
344
402
Pressure with S/T ON
kgf/cm2
3.8
3.5
4.1
Pressure with S/T OFF
kPa
294
245
343
Pressure with S/T OFF
kgf/cm2
3
2.5
3.5
Basic
*
Oil temperature
degC
50
48
52
Remarks
ON
ON
Stop lever angle_02
Pump speed
r/min
900
900
900
Pressure with S/T ON
kPa
373
334
412
Pressure with S/T ON
kgf/cm2
3.8
3.4
4.2
Pressure with S/T OFF
kPa
294
235
353
Pressure with S/T OFF
kgf/cm2
3
2.4
3.6
Basic
*
Oil temperature
degC
50
48
52
Stop lever angle_03
Pump speed
r/min
1800
1800
1800
Pressure with S/T ON
kPa
579
540
618
Pressure with S/T ON
kgf/cm2
5.9
5.5
6.3
Oil temperature
degC
50
48
52
Stop lever angle_04
Pump speed
r/min
2500
2500
2500
Pressure with S/T ON
kPa
706
667
745
Pressure with S/T ON
kgf/cm2
7.2
6.8
7.6
Oil temperature
degC
55
52
58
0000001101
Pump speed
r/min
900
900
900
Timer stroke with S/T ON
mm
4.6
4.4
4.8
Timer stroke with S/T OFF
mm
2.9
2.5
3.3
Basic
*
Oil temperature
degC
50
48
52
Remarks
ON
ON
_02
Pump speed
r/min
900
900
900
Timer stroke with S/T ON
mm
4.6
4.3
4.9
Timer stroke with S/T OFF
mm
2.9
2.4
3.4
Basic
*
Oil temperature
degC
50
48
52
_03
Pump speed
r/min
1200
1200
1200
Timer stroke with S/T ON
mm
6.1
5.6
6.6
Oil temperature
degC
50
48
52
_04
Pump speed
r/min
1800
1800
1800
Timer stroke with S/T ON
mm
9.1
8.4
9.8
Oil temperature
degC
50
48
52
_05
Pump speed
r/min
2300
2300
2300
Timer stroke with S/T ON
mm
11.1
10.6
11.5
Oil temperature
degC
52
50
54
0000001201
Max. applied voltage
V
8
8
8
Test voltage
V
13
12
14
Timing setting
K dimension
mm
3.3
3.2
3.4
KF dimension
mm
7.22
7.12
7.32
MS dimension
mm
1.8
1.7
1.9
Control lever angle alpha
deg.
23
19
27
Control lever angle beta
deg.
41
36
46
Test data Ex:
0000001801 POTENTIOMETER ADJUSTMENT
Potentiometer adjustment (dummy bolt type)
1. Determine the position of the control lever at the adjusting point. Fix with the dummy bolt contacting the lever.
2. In the fixed position, install the potentiometer so that the output voltage is V1 (supply voltage Vi).
3. After completing potentiometer installation, remove the dummy bolt.
N:Pump speed
Q:Injection quantity
V:Output voltage
Vi:Applied voltage
C/L: control lever angle
I:Idling lever position
F:Full speed lever position
E:Conversion point
C:Lever position
G:From idle
H:ON-->OFF
M:OFF-->ON
J:Connecting diagram for the potentiometer
K:Output
O:Output when (2) and (3) connected.
P:When (4) or (6) connected: switch OFF to ON.
R:When (4) or (5) connected: switch ON to OFF.
----------
V1=3.2+-0.03V Vi=10V
----------
N1=600r/min Q1=16.9+-1.0mm3/st V1=3.2+-0.03V V2=1.73+-0.35V V3=8.56+-0.94V C1=- C2=0deg C3=(41deg) C4=4.0+-2.5deg C5=22.5++deg Vi=10V
----------
V1=3.2+-0.03V Vi=10V
----------
N1=600r/min Q1=16.9+-1.0mm3/st V1=3.2+-0.03V V2=1.73+-0.35V V3=8.56+-0.94V C1=- C2=0deg C3=(41deg) C4=4.0+-2.5deg C5=22.5++deg Vi=10V
0000001901 W-CSD ADJUSTMENT
Adjustment of the W-CSD
Adjust the timer stroke determined from the graph below using screw (A).
X:Temperature t (deg C)
Y:Timer stroke TA
B:Timer stroke TA:
(O): diagram 1.
(P): diagram 2
----------
----------
B:t(degC)<=10:TA=2.05mm 10<=t(degC)<=20:TA=-0.019t+2.24 20<=t(degC)<=55:TA=-0.0531t+2.922
----------
----------
B:t(degC)<=10:TA=2.05mm 10<=t(degC)<=20:TA=-0.019t+2.24 20<=t(degC)<=55:TA=-0.0531t+2.922
0000002001 DASHPOT ADJUSTMENT
Adjustment of the dash pot
1. Insert a block gauge L1 (thickness gauge) between the idle set screw (C) and the control lever (D).
2. In the above condition at the control lever position, adjust the locknut (B) so that the dashpot adjusting screw (A) contacts the pushrod, and then fix the locknut (tightening torque T).
Note:
(1)The adjusting screw and pushrod contact faces must be smooth.
(2)Confirm that the control lever returns to the idling position.
ISC actuator installation
1. Maintain the control lever in the idling position.
2. Fix actuator bracket (F) so that the gap between the control lever and the ISC lever's roller (E) is L2.
----------
L1=2.7+-0.05mm L2=1.0-0.5+1.0mm T=6~9N-m{0.6~0.9kgf-m}
----------
L1=2.7+-0.05mm L2=1.0-0.5+1.0mm
----------
L1=2.7+-0.05mm L2=1.0-0.5+1.0mm T=6~9N-m{0.6~0.9kgf-m}
----------
L1=2.7+-0.05mm L2=1.0-0.5+1.0mm
Have questions with 104760-2690?
Group cross 104760-2690 ZEXEL
Nissan
Nissan
104760-2690
9 460 611 996
167001P802
INJECTION-PUMP ASSEMBLY
RD28
RD28