Rating:
Information injection-pump assembly
BOSCH
9 460 613 089
9460613089
ZEXEL
104760-2543
1047602543
NISSAN
1670095P11
1670095p11
Components :
0. | INJECTION-PUMP ASSEMBLY | 104760-2543 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104660-2543 |
3. | NUMBER PLATE | 146915-2800 |
4. | _ | |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | 146679-0520 |
7. | NOZZLE AND HOLDER ASSY | 105141-2991 |
8. | Nozzle and Holder | 16600-84T07 |
9. | Open Pre:MPa(Kqf/cm2) | 12.7{130} |
10. | NOZZLE-HOLDER | 105071-0681 |
11. | NOZZLE | 105000-2200 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0220 | SUPPLY PUMP |
9. | [1] | 146103-0100 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0420 | DRIVE SHAFT |
12/1. | [1] | 146200-0400 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-3420 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146221-1120 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146311-8620 | PUMP PLUNGER |
32. | [1] | 146301-0200 | SLIDING PIECE |
34. | [1] | 146312-3900 | COMPRESSION SPRING |
34B. | [1] | 146312-4000 | COMPRESSION SPRING |
35/1. | [1] | 146690-3200 | SHIM D11.5&9.4T0.1 |
35/1. | [1] | 146690-3300 | SHIM D11.5&9.4T0.2 |
35/1. | [1] | 146690-3400 | SHIM D11.5&9.4T0.25 |
35/1. | [1] | 146690-3500 | SHIM D11.5&9.4T1.0 |
35/1. | [1] | 146690-4100 | SHIM D11.5&9.4T2 |
35/1. | [1] | 146690-4200 | SHIM D11.5&9.4T0.5 |
35/1. | [1] | 146690-4300 | SHIM D11.5&9.4T0.75 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-1600 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
41. | [1] | 146312-4100 | COMPRESSION SPRING |
42. | [1] | 146602-8500 | PLAIN WASHER |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM |
48/1. | [1] | 146690-5900 | SHIM |
48/1. | [1] | 146690-6000 | SHIM |
48/1. | [1] | 146690-6100 | SHIM |
48/1. | [1] | 146690-6200 | SHIM |
48/1. | [1] | 146690-6300 | SHIM |
48/1. | [1] | 146690-6400 | SHIM |
48/1. | [1] | 146690-6500 | SHIM |
48/1. | [1] | 146690-6600 | SHIM |
48/1. | [1] | 146690-6700 | SHIM |
48/1. | [1] | 146690-6800 | SHIM |
48/1. | [1] | 146690-6900 | SHIM |
48/1. | [1] | 146690-7000 | SHIM |
48/1. | [1] | 146690-7100 | SHIM |
48/1. | [1] | 146690-7200 | SHIM |
48/1. | [1] | 146690-7300 | SHIM |
48/1. | [1] | 146690-7400 | SHIM |
48/1. | [1] | 146690-7500 | SHIM |
48/1. | [1] | 146690-7800 | SHIM |
49. | [2] | 146234-0120 | GUIDE PIN |
50. | [1] | 146405-2720 | HYDRAULIC HEAD |
50. | [1] | 146405-2720 | HYDRAULIC HEAD |
50. | [1] | 146405-2720 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [6] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [6] | 146430-4620 | DELIVERY-VALVE ASSEMBLY |
56. | [6] | 146432-0000 | COMPRESSION SPRING |
58. | [6] | 146440-0220 | FITTING |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146503-8620 | GOVERNOR COVER |
67/1. | [1] | 146805-8020 | GOVERNOR COVER |
67/14. | [1] | 146621-1700 | UNION NUT |
67/16. | [1] | 146526-3400 | BLEEDER SCREW |
67/78. | [1] | 146600-4400 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-3400 | THREADED PIN L53.00 |
67/201B. | [1] | 146545-3500 | THREADED PIN L55.00 |
67/201C. | [1] | 146545-3600 | THREADED PIN L57.00 |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146514-4520 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146830-6520 | CONTROL LEVER |
72B. | [1] | 146830-6620 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT M6P1H5 |
95. | [1] | 146861-1020 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0100 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146575-2000 | SLIDING SLEEVE |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-1800 | PLUG L2.10 |
117/1. | [1] | 146577-1900 | PLUG L2.30 |
117/1. | [1] | 146577-2000 | PLUG L2.50 |
117/1. | [1] | 146577-2100 | PLUG L2.70 |
117/1. | [1] | 146577-2200 | PLUG L2.90 |
117/1. | [1] | 146577-2300 | PLUG L3.10 |
117/1. | [1] | 146577-2400 | PLUG L3.30 |
117/1. | [1] | 146577-2500 | PLUG L3.50 |
117/1. | [1] | 146577-2600 | PLUG L3.70 |
117/1. | [1] | 146577-2700 | PLUG L3.90 |
117/1. | [1] | 146577-2800 | PLUG L4.10 |
117/1. | [1] | 146577-2900 | PLUG L4.30 |
117/1. | [1] | 146577-3000 | PLUG L4.50 |
117/1. | [1] | 146577-3100 | PLUG L4.70 |
117/1. | [1] | 146577-3200 | PLUG L4.90 |
117/1. | [1] | 146577-3300 | PLUG L5.10 |
117/1. | [1] | 146577-6700 | PLUG L2.2 |
117/1. | [1] | 146577-6800 | PLUG L2.4 |
117/1. | [1] | 146577-6900 | PLUG L2.6 |
117/1. | [1] | 146577-7000 | PLUG L2.8 |
117/1. | [1] | 146577-7100 | PLUG L3.0 |
117/1. | [1] | 146577-7200 | PLUG L3.2 |
117/1. | [1] | 146577-7300 | PLUG L3.4 |
117/1. | [1] | 146577-7400 | PLUG L3.6 |
117/1. | [1] | 146577-7500 | PLUG L3.8 |
117/1. | [1] | 146577-7600 | PLUG L4.0 |
117/1. | [1] | 146577-7700 | PLUG L4.2 |
117/1. | [1] | 146577-7800 | PLUG L4.4 |
117/1. | [1] | 146577-7900 | PLUG L4.6 |
117/1. | [1] | 146577-8000 | PLUG L4.8 |
117/1. | [1] | 146577-8100 | PLUG L5.0 |
117/1. | [1] | 146877-0000 | PLUG L5.2 |
117/1. | [1] | 146877-0100 | PLUG L5.3 |
117/1. | [1] | 146877-0200 | PLUG L5.4 |
117/1. | [1] | 146877-0300 | PLUG L5.5 |
117/1. | [1] | 146877-4700 | PLUG |
117/1. | [1] | 146877-4800 | PLUG |
117/1. | [1] | 146877-4900 | PLUG |
117/1. | [1] | 146877-5000 | PLUG |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0220 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146650-6020 | PULLING ELECTROMAGNET |
136B. | [1] | 146650-5420 | PULLING ELECTROMAGNET |
136C. | [1] | 146650-6320 | PULLING ELECTROMAGNET |
137. | [2] | 139514-0200 | GASKET |
145. | [1] | 146621-1000 | UNION NUT |
147. | [1] | 016520-1210 | O-RING |
200. | [1] | 146206-0100 | COILED SPRING |
214. | [1] | 146542-5000 | BUSHING |
216. | [1] | 146542-5100 | BUSHING |
217. | [1] | 146541-3100 | SLOTTED WASHER |
218. | [1] | 146592-5600 | COILED SPRING |
219. | [1] | 146541-3000 | BUSHING |
220. | [1] | 146592-5700 | COILED SPRING |
221. | [1] | 146927-8020 | BRACKET |
222. | [3] | 139006-4600 | BLEEDER SCREW |
224. | [1] | 146925-0300 | BRACKET |
240. | [1] | 146650-0720 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
243. | [1] | 146621-1000 | UNION NUT |
245. | [3] | 139512-0200 | GASKET D18.5&12.2T1.00 |
246. | [1] | 139812-0500 | EYE BOLT |
247. | [1] | 146666-4321 | PIPE |
248. | [1] | 146614-0200 | SPACER BUSHING |
275. | [1] | 146612-5020 | BRACKET |
276. | [2] | 010010-1640 | BLEEDER SCREW M10P1.5L16 4T |
280. | [1] | 146361-1020 | START ADVANCE ASSY |
281. | [1] | 146600-0800 | O-RING |
282. | [2] | 010206-1240 | HEX-SOCKET-HEAD CAP SCREW M6P1L12 |
287. | [1] | 020146-1440 | BLEEDER SCREW M6P1L14 |
309. | [4] | 020146-1440 | BLEEDER SCREW M6P1L14 |
309. | [4] | 020146-1440 | BLEEDER SCREW M6P1L14 |
311. | [2] | 010206-1040 | HEX-SOCKET-HEAD CAP SCREW |
318. | [1] | 146931-1620 | BRACKET |
330. | [1] | 146927-0600 | PLATE |
331. | [2] | 020106-1040 | BLEEDER SCREW M6P1L12 |
350. | [1] | 146931-1720 | BRACKET |
800S. | [1] | 146019-3520 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-0720 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
835S. | [1] | 146598-1000 | CAP |
836S/1. | [1] | 146598-0600 | CAP L18 |
836S/1. | [1] | 146598-0700 | CAP L21 |
836S/1. | [1] | 146598-0800 | CAP L24 |
836S/1. | [1] | 146598-0900 | CAP L27 |
905. | [1] | 146679-0520 | ACTUATOR |
905/2. | [1] | 146627-4901 | BRACKET |
905/3. | [2] | 020146-1270 | BLEEDER SCREW |
906. | [1] | 146915-2800 | NAMEPLATE |
916. | [1] | 146662-3020 | WIRE |
924. | [1] | 146680-4000 | DAMPER |
925. | [5] | 020146-1440 | BLEEDER SCREW M6P1L14 |
925. | [5] | 020146-1440 | BLEEDER SCREW M6P1L14 |
936. | [1] | 146683-9820 | POTENTCIOMETER |
936/2. | [1] | 146931-2520 | BRACKET |
936/3. | [2] | 139104-0400 | FLAT-HEAD SCREW |
936/4. | [1] | 146649-0400 | JOINT CONNECTION |
936/4B. | [1] | 146649-0500 | JOINT CONNECTION |
936/4C. | [1] | 146649-0600 | JOINT CONNECTION |
936/4D. | [1] | 146649-0700 | JOINT CONNECTION |
936/4E. | [1] | 146649-0800 | JOINT CONNECTION |
936/4F. | [1] | 146649-0900 | JOINT CONNECTION |
936/4G. | [1] | 146649-1000 | JOINT CONNECTION |
936/4H. | [1] | 146649-1100 | JOINT CONNECTION |
936/4I. | [1] | 146649-1200 | JOINT CONNECTION |
936/4J. | [1] | 146649-1300 | JOINT CONNECTION |
936/4K. | [1] | 146649-1400 | JOINT CONNECTION |
936/4L. | [1] | 146649-1500 | JOINT CONNECTION |
937. | [1] | 146927-4000 | BRACKET |
938. | [3] | 139006-4800 | BLEEDER SCREW |
938. | [3] | 139006-4800 | BLEEDER SCREW |
939. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
947S. | [1] | 146683-9810 | POTENTCIOMETER |
Include in #2:
104760-2543
as INJECTION-PUMP ASSEMBLY
Cross reference number
BOSCH
9 460 613 089
9460613089
ZEXEL
104760-2543
1047602543
NISSAN
1670095P11
1670095p11
Zexel num
Bosch num
Firm num
Name
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113orSAEJ967d
1404 Test oil ISO4113orSAEJ967d
Test oil temperature
degC
45
45
50
Nozzle
105780-0060
Bosch type code
NP-DN0SD1510
Nozzle holder
105780-2150
Opening pressure
MPa
13
13
13.3
Opening pressure
kgf/cm2
133
133
136
Injection pipe
157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450
Inside diameter - outside diameter - length (mm) mm 2-6-450
Joint assembly
157641-4720
Tube assembly
157641-4020
Transfer pump pressure
kPa
20
20
20
Transfer pump pressure
kgf/cm2
0.2
0.2
0.2
Direction of rotation (viewed from drive side)
Right R
Right R
Injection timing adjustment
Pump speed
r/min
700
700
700
Average injection quantity
mm3/st.
29.3
28.9
29.7
Difference in delivery
mm3/st.
2
Basic
*
Injection timing adjustment_02
Pump speed
r/min
2600
2600
2600
Average injection quantity
mm3/st.
27
24.5
29.5
Injection timing adjustment_03
Pump speed
r/min
2500
2500
2500
Average injection quantity
mm3/st.
32.3
28.3
36.3
Injection timing adjustment_04
Pump speed
r/min
2300
2300
2300
Average injection quantity
mm3/st.
32.4
28.9
35.9
Injection timing adjustment_05
Pump speed
r/min
1800
1800
1800
Average injection quantity
mm3/st.
31.1
27.6
34.6
Injection timing adjustment_06
Pump speed
r/min
1200
1200
1200
Average injection quantity
mm3/st.
29.9
27.4
32.4
Injection timing adjustment_07
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
28.9
26.4
31.4
Injection timing adjustment_08
Pump speed
r/min
700
700
700
Average injection quantity
mm3/st.
29.3
28.4
30.2
Injection quantity adjustment
Pump speed
r/min
2600
2600
2600
Average injection quantity
mm3/st.
27
25
29
Difference in delivery
mm3/st.
4.5
Basic
*
Injection quantity adjustment_02
Pump speed
r/min
2800
2800
2800
Average injection quantity
mm3/st.
6.5
Governor adjustment
Pump speed
r/min
290
290
290
Average injection quantity
mm3/st.
11
10
12
Difference in delivery
mm3/st.
1.7
Basic
*
Governor adjustment_02
Pump speed
r/min
500
500
500
Average injection quantity
mm3/st.
7
Governor adjustment_03
Pump speed
r/min
290
290
290
Average injection quantity
mm3/st.
11
9.5
12.5
Boost compensator adjustment
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
20
13.5
26.5
Lever angle (shim thickness)
mm
4.6
4.55
4.65
Remarks
From idle
From idle
Boost compensator adjustment_02
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
14.1
7.1
21.1
Lever angle (shim thickness)
mm
4.6
4.55
4.65
Remarks
From idle
From idle
Timer adjustment
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
35
35
Basic
*
Speed control lever angle
Pump speed
r/min
900
900
900
Average injection quantity
mm3/st.
0
0
0
Remarks
Magnet OFF at full-load position
Magnet OFF at full-load position
0000000901
Pump speed
r/min
900
900
900
Overflow quantity
cm3/min
468
336
600
Stop lever angle
Pump speed
r/min
900
900
900
Pressure with S/T ON
kPa
372.5
343
402
Pressure with S/T ON
kgf/cm2
3.8
3.5
4.1
Pressure with S/T OFF
kPa
294
245
343
Pressure with S/T OFF
kgf/cm2
3
2.5
3.5
Basic
*
Stop lever angle_02
Pump speed
r/min
900
900
900
Pressure with S/T ON
kPa
372.5
343
402
Pressure with S/T ON
kgf/cm2
3.8
3.5
4.1
Pressure with S/T OFF
kPa
294
245
343
Pressure with S/T OFF
kgf/cm2
3
2.5
3.5
Stop lever angle_03
Pump speed
r/min
1800
1800
1800
Pressure with S/T ON
kPa
578.5
549
608
Pressure with S/T ON
kgf/cm2
5.9
5.6
6.2
Stop lever angle_04
Pump speed
r/min
2500
2500
2500
Pressure with S/T ON
kPa
706
677
735
Pressure with S/T ON
kgf/cm2
7.2
6.9
7.5
0000001101
Pump speed
r/min
900
900
900
Timer stroke with S/T ON
mm
4.6
4.4
4.8
Timer stroke with S/T OFF
mm
2.9
2.5
3.3
Basic
*
_02
Pump speed
r/min
900
900
900
Timer stroke with S/T ON
mm
4.6
4.3
4.9
Timer stroke with S/T OFF
mm
2.9
2.4
3.4
_03
Pump speed
r/min
1200
1200
1200
Timer stroke with S/T ON
mm
6.1
5.5
6.7
_04
Pump speed
r/min
1800
1800
1800
Timer stroke with S/T ON
mm
9.1
8.3
9.9
_05
Pump speed
r/min
2300
2300
2300
Timer stroke with S/T ON
mm
11
10.5
11.5
0000001201
Max. applied voltage
V
8
8
8
Test voltage
V
13
12
14
Timing setting
K dimension
mm
3.3
3.2
3.4
KF dimension
mm
7.22
7.12
7.32
MS dimension
mm
1.8
1.7
1.9
Control lever angle alpha
deg.
23
19
27
Control lever angle beta
deg.
41
36
46
Control lever angle gamma
deg.
8.8
8.3
9.3
Test data Ex:
0000001801 POTENTIOMETER ADJUSTMENT
Adjustment of the potentiometer
Adjusting method (dummy bolt method):
1. Position the control lever at the adjusting points in the table, hold the dummy bolt against the lever and fix.
2. In the fixed position, install the potentiometer so that the output voltage is V1 (supply voltage Vi).
3. After completing potentiometer installation, remove the dummy bolt.
A:Adjusting point
B:Checking point
C:Control lever angle
N:Pump speed
Q:Injection quantity
Vo:Output voltage
M:Connecting diagram for the potentiometer
O:Output
P:Output when (2) and (3) connected.
I:Idle position
F:Full speed position
P:Boost pressure
----------
Vi=10V V1=3.20+-0.03V
----------
N1=600r/min V1=3.20+-0.03V V2=1.9+-0.67V V3=9.6--V Q1=16.9+-1.0cm3/1,000st a=0deg b=(41)deg Vi=10V
----------
Vi=10V V1=3.20+-0.03V
----------
N1=600r/min V1=3.20+-0.03V V2=1.9+-0.67V V3=9.6--V Q1=16.9+-1.0cm3/1,000st a=0deg b=(41)deg Vi=10V
0000001901 W-CSD ADJUSTMENT
Adjustment of the W-CSD
Adjust the timer stroke determined from the graph below using screw (A).
X:Temperature t (deg C)
Y:Timer stroke TA
B:Timer stroke TA:
(O): diagram 1.
(P): diagram 2
----------
----------
B:t(degC)<=10:TA=2.05mm 10<=t(degC)<=20:TA=-0.019t+2.24 20<=t(degC)<=55:TA=-0.0531t+2.922
----------
----------
B:t(degC)<=10:TA=2.05mm 10<=t(degC)<=20:TA=-0.019t+2.24 20<=t(degC)<=55:TA=-0.0531t+2.922
0000002001 DASHPOT ADJUSTMENT
Adjustment of the dash pot
1. Insert a block gauge L1 (thickness gauge) between the idle set screw and the bracket.
2. In the above condition, adjust the elongated hole so that the pushrod contacts the control lever. Then, fix using the bolt.
TT
Note:
(1)The dashpot and control lever contact faces must be smooth.
(2)Confirm that the control lever returns to the idling position.
ISC actuator installation
1. Maintain the control lever in the idling position.
2. Fix the actuator bracket (A) so that the clearance between the control lever and the ISC lever's roller (B) is L2.
----------
L1=3.9+-0.05mm L2=1.0+1.0-0.5mm T=6~9Nm{0.6~0.9kgfm}
----------
L1=3.9+-0.05mm L2=1.0+1.0-0.5mm
----------
L1=3.9+-0.05mm L2=1.0+1.0-0.5mm T=6~9Nm{0.6~0.9kgfm}
----------
L1=3.9+-0.05mm L2=1.0+1.0-0.5mm
0000002101 A/T PLATE ADJUSTMENT
A/T wire installation plate adjustment
Confirm angle beta and adjust the A/T wire installation plate using angle beta in (1), (2) and (3) below.
(1)When a <= beta <= b, adjust the plate so that R = R1.
(2)When c <= beta <= d, adjust the plate so that R = R2.
(3)When e <= beta <= f, adjust the plate so that R = R3.
(A) = A/T wire installation plate
----------
a=37deg b=40.0deg c=40.0deg d=43.5deg e=43.5deg f=47deg R1=62.5mm R2=57.5+-0.4mm R3=53.5mm
----------
T=6~9N-m{0.6~0.9kgf-m} SW=SW10
----------
a=37deg b=40.0deg c=40.0deg d=43.5deg e=43.5deg f=47deg R1=62.5mm R2=57.5+-0.4mm R3=53.5mm
----------
T=6~9N-m{0.6~0.9kgf-m} SW=SW10