104749-6400 ZEXEL 9 460 613 720 BOSCH INJECTION-PUMP ASSEMBLY 9460613720 1047496400 8944192640

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104749-6400 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 613 720 9460613720

ZEXEL 104749-6400 1047496400

ISUZU 8944192640 8944192640

Components :

0.	INJECTION-PUMP ASSEMBLY	104749-6400
1.	_
2.	FUEL INJECTION PUMP	104649-1860
3.	NUMBER PLATE	146639-6200
4.	_	146672-1220
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105158-2090
8.	Nozzle and Holder	8-94418-161-0
9.	Open Pre:MPa(Kqf/cm2)	13.2{135}
10.	NOZZLE-HOLDER	105088-1042
11.	NOZZLE	105007-1061

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0520	DRIVE SHAFT
12/1.	[1]	146200-0500	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-0120	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-0020	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-0600	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM D17.5&7.5T0.60
34.	[1]	146302-0100	COMPRESSION SPRING K=2.25KG/MM
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0000	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-0100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146400-8420	HYDRAULIC HEAD
50.	[1]	146400-8420	HYDRAULIC HEAD
50.	[1]	146400-8420	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET D12&6.4T1.00
55.	[4]	146430-0120	DELIVERY-VALVE ASSEMBLY
56.	[4]	146432-0000	COMPRESSION SPRING
58.	[4]	146440-0120	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146502-8220	GOVERNOR COVER
67/1.	[1]	146508-4320	GOVERNOR COVER
67/13.	[2]	013020-6040	UNION NUT M6P1H5
67/13.	[2]	013020-6040	UNION NUT M6P1H5
67/14.	[1]	029240-6010	UNION NUT M6P1.0H5*
67/15.	[1]	146526-0300	BLEEDER SCREW
67/16.	[1]	146526-0200	BLEEDER SCREW
67/23.	[1]	146626-2920	BRACKET
67/78.	[1]	146600-4400	SEAL RING
67/111.	[1]	146526-1800	BLEEDER SCREW
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-1620	THREADED PIN
67/202.	[1]	139208-0100	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146510-8220	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146534-3220	CONTROL LEVER
72B.	[1]	146534-3320	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER
75.	[1]	013020-6040	UNION NUT M6P1H5
95.	[1]	146551-4620	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0100	UNION NUT
108.	[1]	146570-0320	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER D20&8.4T1.40
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER D17&6.4T1.60
115.	[1]	146575-3200	SLIDING SLEEVE
116.	[1]	146576-0000	SEALING CAP
117/1.	[1]	146577-1800	PLUG L2.10
117/1.	[1]	146577-1900	PLUG L2.30
117/1.	[1]	146577-2000	PLUG L2.50
117/1.	[1]	146577-2100	PLUG L2.70
117/1.	[1]	146577-2200	PLUG L2.90
117/1.	[1]	146577-2300	PLUG L3.10
117/1.	[1]	146577-2400	PLUG L3.30
117/1.	[1]	146577-2500	PLUG L3.50
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-3200	PLUG L4.90
117/1.	[1]	146577-3300	PLUG L5.10
117/1.	[1]	146577-6700	PLUG L2.2
117/1.	[1]	146577-6800	PLUG L2.4
117/1.	[1]	146577-6900	PLUG L2.6
117/1.	[1]	146577-7000	PLUG L2.8
117/1.	[1]	146577-7100	PLUG L3.0
117/1.	[1]	146577-7200	PLUG L3.2
117/1.	[1]	146577-7300	PLUG L3.4
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
117/1.	[1]	146577-8000	PLUG L4.8
117/1.	[1]	146577-8100	PLUG L5.0
117/1.	[1]	146877-0000	PLUG L5.2
117/1.	[1]	146877-0100	PLUG L5.3
117/1.	[1]	146877-0200	PLUG L5.4
117/1.	[1]	146877-0300	PLUG L5.5
117/1.	[1]	146877-4700	PLUG
117/1.	[1]	146877-4800	PLUG
117/1.	[1]	146877-4900	PLUG
117/1.	[1]	146877-5000	PLUG
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0920	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0120	OVER FLOW VALVE
137.	[2]	026512-1840	GASKET D17.9&12.2T1.50
138.	[1]	146605-3720	INLET UNION
200.	[1]	146206-0100	COILED SPRING
205.	[1]	146201-0100	WOODRUFF KEY
218.	[1]	146587-7320	COILED SPRING
220.	[1]	146587-7600	COILED SPRING
225.	[1]	146627-7120	BRACKET
230.	[1]	146628-1800	BRACKET
231.	[1]	139106-0500	FLAT-HEAD SCREW M6P1.0H25
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-4620	WIRE
243.	[1]	146621-1000	UNION NUT
244.	[1]	146613-5620	PLATE
245.	[3]	026512-1840	GASKET D17.9&12.2T1.50
246.	[1]	146125-0020	EYE BOLT
247.	[1]	146606-7020	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
275.	[1]	146619-6220	BRACKET
276.	[2]	010010-2040	BLEEDER SCREW M10P1.5L20
277.	[2]	014111-0440	LOCKING WASHER
450.	[1]	146676-2020	ADJUSTING DEVICE
455.	[1]	146549-1800	BUSHING
460.	[1]	016010-0440	LOCKING WASHER
465.	[1]	146616-4200	SPACER BUSHING
470.	[1]	139106-0500	FLAT-HEAD SCREW M6P1.0H25
471.	[1]	139106-0400	FLAT-HEAD SCREW M6P1.0H12
472.	[2]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
800S.	[1]	146009-4720	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-0220	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
903.	[1]	146672-1220	PULSE GENERATOR
903/2.	[1]	146600-1300	O-RING &13W1.9
906.	[1]	146639-6200	NAMEPLATE

Include in #2:

104749-6400 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 613 720 9460613720

ZEXEL 104749-6400 1047496400

ISUZU 8944192640 8944192640

Zexel num

Bosch num

Firm num

Name

104749-6400
104749-6540

9 460 613 720

8944192640 ISUZU

INJECTION-PUMP ASSEMBLY
4FC1J * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 40.2 39.7 40.7

Difference in delivery mm3/st. 3.5

Basic *

Remarks
For Japan

Injection timing adjustment_02

Pump speed r/min 2650 2650 2650

Average injection quantity mm3/st. 12.1 8.6 15.6

Remarks
For Japan

Injection timing adjustment_03

Pump speed r/min 2350 2350 2350

Average injection quantity mm3/st. 35.1 33 37.2

Remarks
For Japan

Injection timing adjustment_04

Pump speed r/min 2250 2250 2250

Average injection quantity mm3/st. 35.2 33.2 37.2

Remarks
For Japan

Injection timing adjustment_05

Pump speed r/min 2000 2000 2000

Average injection quantity mm3/st. 35.7 33.7 37.7

Remarks
For Japan

Injection timing adjustment_06

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 40.2 39.2 41.2

Remarks
For Japan

Injection timing adjustment_07

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 39.2 37.2 41.2

Remarks
For Japan

Injection quantity adjustment

Pump speed r/min 2650 2650 2650

Average injection quantity mm3/st. 12.1 9.1 15.1

Difference in delivery mm3/st. 4

Basic *

Remarks
For Japan

Injection quantity adjustment_02

Pump speed r/min 2800 2800 2800

Average injection quantity mm3/st. 5

Remarks
For Japan

Governor adjustment

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 8.8 6.8 10.8

Difference in delivery mm3/st. 2

Basic *

Remarks
For Japan

Governor adjustment_02

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 8.8 6.8 10.8

Remarks
For Japan

Governor adjustment_03

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 3

Remarks
For Japan

Boost compensator adjustment

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 8 7 9

Difference in delivery mm3/st. 2

Remarks
For Japan: refer to additional devices

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 75 60 90

Basic *

Remarks
For Japan

Speed control lever angle

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 0 0 0

Remarks
For Japan: Magnet OFF

0000000901

Pump speed r/min 1250 1250 1250

Overflow quantity cm3/min 420 290 550

Remarks
For Japan

Stop lever angle

Pump speed r/min 1250 1250 1250

Pressure kPa 431.5 412 451

Pressure kgf/cm2 4.4 4.2 4.6

Basic *

Remarks
For Japan

Stop lever angle_02

Pump speed r/min 600 600 600

Pressure kPa 255 226 284

Pressure kgf/cm2 2.6 2.3 2.9

Remarks
For Japan

Stop lever angle_03

Pump speed r/min 1250 1250 1250

Pressure kPa 431.5 412 451

Pressure kgf/cm2 4.4 4.2 4.6

Remarks
For Japan

Stop lever angle_04

Pump speed r/min 2000 2000 2000

Pressure kPa 627.5 598 657

Pressure kgf/cm2 6.4 6.1 6.7

Remarks
For Japan

Stop lever angle_05

Pump speed r/min 2050 2050 2050

Pressure kPa 637.5 608 667

Pressure kgf/cm2 6.5 6.2 6.8

Remarks
For Japan

0000001101

Pump speed r/min 1250 1250 1250

Timer stroke mm 3.9 3.7 4.1

Basic *

Remarks
For Japan

_02

Pump speed r/min 1250 1250 1250

Timer stroke mm 3.9 3.6 4.2

Remarks
For Japan

_03

Pump speed r/min 1750 1750 1750

Timer stroke mm 6.6 6 7.2

Remarks
For Japan

_04

Pump speed r/min 2050 2050 2050

Timer stroke mm 8.2 7.8 8.6

Remarks
For Japan

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 33 32.5 33.5

Timer stroke variation dT mm 0.9 0.7 1.1

Basic *

Remarks
For Japan

_02

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 33 32 34

Timer stroke variation dT mm 0.9 0.6 1.2

Remarks
For Japan

_03

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 25 23.5 26.5

Timer stroke variation dT mm 1.6 1.1 2.1

Remarks
For Japan

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1.6 1.5 1.7

Control lever angle alpha
Using sub-lever measuring hole. deg. 20 16 24

Control lever angle beta deg. 37.5 33.5 41.5

Test data Ex:

0000001801 ADJUSTMENT PRECAUTIONS

Adjustment of partial injection quantity for N1 1. At N2 adjust the idle injection quantity to the specification using the stopper bolt (A) and then fix using fixing nut (B). 2. Confirm that injection is as specified at N3 with the lever in the idle position. 3. Insert a shim L1 between the sub-lever and the idle stopper bolt (C) and adjust the injection quantity at N4 to the specification using idle stopper bolt (C). 4. Fix the idle stopper bolt (C) using the fixing nut (D).
----------
N1=900r/min N2=400r/min N3=600r/min N4=900r/min L1=7.1+-0.1mm
----------
L1=7.1+-0.1mm

0000001901 MICROSWITCH ADJUSTMENT

Microswitch adjustment Stepping motor adjustment 1. With the sub-lever and the control lever contacting the idle stopper bolt, adjust the length of the rod so that the stepping motor bracket and the stepping motor lever aligning mark are aligned. A = rod B = position of angle alignment marking C = stepping motor bracket D = stepping motor lever T = nut tightening torque T1 2. Idle position adjustment 1) Fix so that idle stopper contacts the control lever. 2) Insert shim L1 between the sub-lever and the idle stopper. 3) Move the microswitch in the direction of the arrow to turn it ON. 4) Move the microswitch in the direction of the arrow and fix it where it turns OFF using the microswitch fixing bolt. E = microswitch fixing bolt 3. Full position adjustment 1) 1) Fix so that sub lever contacts the control lever. 2) Insert a shim L2 between the control lever and the full stopper. 3) Turn the plate clockwise as shown in the figure above and confirm that the microswitch turns ON. 4) Move the plate counterclockwise and fix it where the microswitch turns OFF. F = bolt G = plate
----------
L1=1.2mm L2=0.7mm T1=3.5~5N-m{0.35~0.5kgf-m}
----------
a=30+-1deg L1=1.2mm L2=0.7mm T2=2~3N-m{0.2~0.3kgf-m}