104749-6120 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047496120 8941433320

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104749-6120 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104749-6120 1047496120

ISUZU 8941433320 8941433320

Cross reference number

ZEXEL 104749-6120 1047496120

ISUZU 8941433320 8941433320

Zexel num

Bosch num

Firm num

Name

104749-6120
104749-6121

8941433320 ISUZU

INJECTION-PUMP ASSEMBLY
4FC1D *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 32.5 32 33

Difference in delivery mm3/st. 2.5

Basic *

Injection timing adjustment_02

Pump speed r/min 2600 2600 2600

Average injection quantity mm3/st. 15.2 13.2 17.2

Injection timing adjustment_03

Pump speed r/min 2250 2250 2250

Average injection quantity mm3/st. 31.5 29.4 33.6

Injection timing adjustment_04

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 32.5 31.5 33.5

Injection timing adjustment_05

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 26.5 24.5 28.5

Injection quantity adjustment

Pump speed r/min 2600 2600 2600

Average injection quantity mm3/st. 15.5 14.5 16.5

Difference in delivery mm3/st. 4.5

Basic *

Injection quantity adjustment_02

Pump speed r/min 2900 2900 2900

Average injection quantity mm3/st. 5

Governor adjustment

Pump speed r/min 330 330 330

Average injection quantity mm3/st. 7.6 5.6 9.6

Difference in delivery mm3/st. 2

Basic *

Governor adjustment_02

Pump speed r/min 330 330 330

Average injection quantity mm3/st. 7.6 5.6 9.6

Governor adjustment_03

Pump speed r/min 450 450 450

Average injection quantity mm3/st. 0 0 0

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 60 50 70

Basic *

Speed control lever angle

Pump speed r/min 330 330 330

Average injection quantity mm3/st. 0 0 0

Remarks
Magnet OFF

0000000901

Pump speed r/min 1250 1250 1250

Overflow quantity cm3/min 480 348 612

Stop lever angle

Pump speed r/min 1250 1250 1250

Pressure kPa 470.5 451 490

Pressure kgf/cm2 4.8 4.6 5

Basic *

Stop lever angle_02

Pump speed r/min 1250 1250 1250

Pressure kPa 470.5 451 490

Pressure kgf/cm2 4.8 4.6 5

Stop lever angle_03

Pump speed r/min 2000 2000 2000

Pressure kPa 637.5 608 667

Pressure kgf/cm2 6.5 6.2 6.8

0000001101

Pump speed r/min 1250 1250 1250

Timer stroke mm 3.9 3.7 4.1

Basic *

_02

Pump speed r/min 1250 1250 1250

Timer stroke mm 3.9 3.6 4.2

_03

Pump speed r/min 1800 1800 1800

Timer stroke mm 6.7 6.1 7.3

_04

Pump speed r/min 2250 2250 2250

Timer stroke mm 9 8.6 9.4

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001501

Pump speed r/min 1250 1250 1250

Atmospheric pressure difference kPa -21.9 -22.6 -21.2

Atmospheric pressure difference mmHg -164 -169 -159

Decrease qty mm3/st. 3.4 2.4 4.4

Basic *

_02

Pump speed r/min 1250 1250 1250

Atmospheric pressure difference kPa -21.9 -22.6 -21.2

Atmospheric pressure difference mmHg -164 -169 -159

Decrease qty mm3/st. 3.4 1.7 5.1

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1.6 1.5 1.7

Pre-stroke mm 0.25 0.23 0.27

Control lever angle alpha deg. -3 -7 1

Control lever angle beta deg. 37 32 42

Test data Ex:

0000001501 ANEROID COMPENSATOR

ACS adjustment Full load injection quantity at high altitudes and ACS adjusting method 1. Full load injection quantity adjustment (1)Remove the ACS cover and remove the bellows and adjusting shim. (2)Perform all adjustments as per the adjustment standard except for ACS adjustment. 2. ACS adjustment Adjust the ACS so that the reduction amount corresponds to the altitude in the table. X1 = atmospheric pressure X2 = altitude Y = decrease quantity (A) = adjustment value (B) = test value
----------
N1=1250r/min
----------