104749-1190 ZEXEL 9 460 614 693 BOSCH INJECTION-PUMP ASSEMBLY 9460614693 1047491190 8942439070

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104749-1190 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 614 693 9460614693

ZEXEL 104749-1190 1047491190

ISUZU 8942439070 8942439070

Components :

0.	INJECTION-PUMP ASSEMBLY	104749-1190
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)
10.	NOZZLE-HOLDER
11.	NOZZLE

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0320	DRIVE SHAFT
12/1.	[1]	146200-0300	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-1720	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-0020	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-0900	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-3500	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0000	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146340-0921	START ADVANCE ASSY
39/1.	[1]	146342-2200	DIAPHRAGM HOUSING
39/2.	[1]	146342-2320	PUMP PLUNGER
39/3.	[1]	146342-2421	COVER
39/4.	[1]	146342-3700	COILED SPRING
39/5.	[1]	146342-3800	COILED SPRING
39/6.	[1]	146602-1600	PLAIN WASHER
39/7/1.	[0]	146603-4300	SHIM T0.30
39/7/1.	[0]	146603-4400	SHIM T0.50
39/7/1.	[0]	146603-4500	SHIM T0.70
39/7/1.	[0]	146603-4600	SHIM T1.00
39/7/1.	[0]	146603-4700	SHIM T1.20
39/9.	[1]	146342-2800	CAPSULE
39/10.	[1]	016500-2220	O-RING
39/11.	[4]	020106-1640	BLEEDER SCREW
39/14.	[1]	131420-0400	BLEEDER SCREW
39/15.	[1]	026506-1040	GASKET
40.	[2]	013020-6040	UNION NUT
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0500	GUIDE PIN
50.	[1]	146400-5220	HYDRAULIC HEAD
50.	[1]	146400-5220	HYDRAULIC HEAD
50.	[1]	146400-5220	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET
55.	[4]	146430-0120	DELIVERY-VALVE ASSEMBLY VE2
56.	[4]	146432-0000	COMPRESSION SPRING
58.	[4]	146440-0120	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146705-0521	ANEROID CAPSULE
67/1.	[1]	146505-3420	GOVERNOR COVER
67/13.	[1]	013020-6040	UNION NUT
67/14.	[1]	029240-6010	UNION NUT
67/15.	[1]	146526-1800	BLEEDER SCREW
67/16.	[1]	146526-1000	FLAT-HEAD SCREW
67/23.	[1]	146613-8000	BRACKET
67/24.	[2]	020106-1640	BLEEDER SCREW
67/26.	[1]	146613-6520	BRACKET
67/31.	[1]	146710-0400	BUSHING
67/32.	[1]	146602-1400	PLAIN WASHER
67/33.	[1]	146716-0100	UNION NUT
67/34/1.	[1]	146713-1000	BEARING PIN L24.6
67/34/1.	[1]	146713-1100	BEARING PIN L24.8
67/34/1.	[1]	146713-1200	BEARING PIN L25.0
67/34/1.	[1]	146713-1300	BEARING PIN L25.2
67/34/1.	[1]	146713-1400	BEARING PIN L25.4
67/35.	[1]	146621-0300	UNION NUT
67/36.	[1]	146600-1400	O-RING
67/37.	[1]	146710-0100	BUSHING
67/38.	[1]	139506-0200	GASKET
67/39.	[1]	146620-0300	CAPSULE
67/40.	[1]	026512-1540	GASKET
67/41.	[1]	146713-3700	ADJUSTING PIN
67/46.	[1]	146602-1300	PLAIN WASHER
67/47.	[1]	146717-0200	COILED SPRING
67/49.	[1]	146721-0420	COVER
67/54.	[2]	139106-0300	FLAT-HEAD SCREW
67/55.	[2]	139106-0000	FLAT-HEAD SCREW
67/56.	[1]	146723-0120	CONTROL LEVER
67/57.	[1]	146712-0100	BEARING PIN
67/58.	[2]	146620-0600	CAPSULE
67/59.	[2]	026506-1040	GASKET
67/60.	[1]	146724-0020	AIR FILTER
67/70.	[1]	146600-2000	SEAL RING
67/71.	[1]	146714-0100	SLOTTED WASHER
67/72.	[1]	016010-0920	LOCKING WASHER
67/73.	[1]	146715-0120	BELLOWS
67/74/1.	[0]	146603-3700	SHIM T0.20
67/74/1.	[0]	146603-3800	SHIM T0.30
67/74/1.	[0]	146603-3900	SHIM T0.50
67/74/1.	[0]	146603-4000	SHIM T0.70
67/74/1.	[0]	146603-4100	SHIM T1.00
67/74/1.	[0]	146603-4200	SHIM T1.50
67/78.	[1]	146600-4400	SEAL RING
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-0300	THREADED PIN L53.00
67/201B.	[1]	146545-0400	THREADED PIN L55.00
67/201C.	[1]	146545-0500	THREADED PIN L57.00
67/202.	[1]	139208-0100	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146510-1120	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146531-1020	CONTROL LEVER
72B.	[1]	146531-1120	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
75.	[1]	013020-6040	UNION NUT
95.	[1]	146551-1020	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1.0
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0100	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146575-0000	SLIDING SLEEVE
116.	[1]	146576-0000	SEALING CAP
117/1.	[1]	146577-0000	PLUG L1.70
117/1.	[1]	146577-0100	PLUG L1.90
117/1.	[1]	146577-0200	PLUG L2.10
117/1.	[1]	146577-0300	PLUG L2.30
117/1.	[1]	146577-0400	PLUG L2.50
117/1.	[1]	146577-0500	PLUG L2.70
117/1.	[1]	146577-0600	PLUG L2.90
117/1.	[1]	146577-0700	PLUG L3.10
117/1.	[1]	146577-0800	PLUG L3.30
117/1.	[1]	146577-0900	PLUG L3.50
117/1.	[1]	146577-1000	PLUG L3.70
117/1.	[1]	146577-1100	PLUG L3.90
117/1.	[1]	146577-1200	PLUG L4.10
117/1.	[1]	146577-1300	PLUG L4.30
117/1.	[1]	146577-1400	PLUG L4.50
117/1.	[1]	146577-1500	PLUG L4.70
117/1.	[1]	146577-1600	PLUG L4.90
117/1.	[1]	146577-1700	PLUG L5.10
117/1.	[1]	146577-5000	PLUG L1.8
117/1.	[1]	146577-5100	PLUG L2.0
117/1.	[1]	146577-5200	PLUG L2.2
117/1.	[1]	146577-5300	PLUG L2.4
117/1.	[1]	146577-5400	PLUG L2.6
117/1.	[1]	146577-5500	PLUG L2.8
117/1.	[1]	146577-5600	PLUG L3.0
117/1.	[1]	146577-5700	PLUG L3.2
117/1.	[1]	146577-5800	PLUG L3.4
117/1.	[1]	146577-5900	PLUG L3.6
117/1.	[1]	146577-6000	PLUG L3.8
117/1.	[1]	146577-6100	PLUG L4.0
117/1.	[1]	146577-6200	PLUG L4.2
117/1.	[1]	146577-6300	PLUG L4.4
117/1.	[1]	146577-6400	PLUG L4.6
117/1.	[1]	146577-6500	PLUG L4.8
117/1.	[1]	146577-6600	PLUG L5.0
117/1.	[1]	146877-0400	PLUG
117/1.	[1]	146877-0500	PLUG
117/1.	[1]	146877-0600	PLUG
117/1.	[1]	146877-0700	PLUG
117/1.	[1]	146877-4300	PLUG
117/1.	[1]	146877-4400	PLUG
117/1.	[1]	146877-4500	PLUG
117/1.	[1]	146877-4600	PLUG
123.	[4]	146620-0500	HEX-SOCKET-HEAD CAP SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1.0
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0220	CONTROL VALVE STAMP 02
135/5.	[1]	146114-0000	SPRING WASHER
135B.	[1]	146110-1020	CONTROL VALVE STAMP 10
135B/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0020	OVER FLOW VALVE
137.	[2]	139512-0500	GASKET
138.	[1]	146610-7520	PIPE
150.	[2]	014020-6140	PLAIN WASHER D11.5&6.5
151.	[2]	139010-0300	STUD
153.	[1]	139808-0301	EYE BOLT
154.	[2]	026508-1140	GASKET D11.4&8.2T1.0
200.	[1]	146206-0100	COILED SPRING
205.	[1]	025804-1610	WOODRUFF KEY
206.	[1]	013121-4140	UNION NUT
207.	[1]	029321-4050	LOCKING WASHER
214.	[1]	146541-1900	BUSHING
216.	[1]	146541-2000	BUSHING
220.	[1]	146587-2600	COILED SPRING
230.	[1]	146613-7400	BRACKET
231.	[2]	139106-0500	FLAT-HEAD SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-7320	WIRE
243.	[1]	146621-1000	UNION NUT
244.	[1]	146613-8420	BRACKET
244/1.	[1]	146613-8400	BRACKET
244/2.	[1]	146613-5600	PLATE
244/3.	[1]	020105-0940	BLEEDER SCREW
245.	[3]	139512-0500	GASKET
246.	[1]	146125-0020	EYE BOLT
247.	[1]	146610-8620	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
260.	[1]	146611-0021	BRACKET
261.	[2]	146621-4700	UNION NUT
270.	[1]	146615-0000	TIMER CORE
312.	[2]	013020-6040	UNION NUT
313.	[2]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
800S.	[1]	146009-4220	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-0220	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
811S.	[1]	146600-2120	PARTS SET
812S.	[1]	146600-2220	PARTS SET
821S.	[1]	146210-5720	ROLLER SET
903.	[1]	146620-0120	CAPSULE
903/2.	[1]	146600-1300	O-RING
905.	[1]	146620-2220	ACTUATOR
906.	[1]	146633-2600	NAMEPLATE

Include in #2:

104749-1190 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 614 693 9460614693

ZEXEL 104749-1190 1047491190

ISUZU 8942439070 8942439070

Zexel num

Bosch num

Firm num

Name

104749-1190

9 460 614 693

8942439070 ISUZU

INJECTION-PUMP ASSEMBLY
C223 K

Calibration Data:

Adjustment conditions

(Note)
For Japan: year/month/day (change sequence) 1982/03/01 (1)

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 36.3 35.8 36.8

Difference in delivery mm3/st. 3

Basic *

Injection timing adjustment_02

Pump speed r/min 2440 2440 2440

Average injection quantity mm3/st. 12.5 9.5 15.5

Injection timing adjustment_03

Pump speed r/min 2175 2175 2175

Average injection quantity mm3/st. 33.8 31.8 35.8

Injection timing adjustment_04

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 36.3 35.3 37.3

Injection timing adjustment_05

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 31.7 29.7 33.7

Injection timing adjustment_06

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 35.4 34.9 35.9

Difference in delivery mm3/st. 3

Basic *

Remarks
For Japan

Injection timing adjustment_07

Pump speed r/min 2440 2440 2440

Average injection quantity mm3/st. 12.2 9.2 15.2

Remarks
For Japan

Injection timing adjustment_08

Pump speed r/min 2175 2175 2175

Average injection quantity mm3/st. 33 31 35

Remarks
For Japan

Injection timing adjustment_09

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 35.4 34.4 36.4

Remarks
For Japan

Injection timing adjustment_10

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 30.9 28.9 32.9

Remarks
For Japan

Injection quantity adjustment

Pump speed r/min 2440 2440 2440

Average injection quantity mm3/st. 12.5 9.5 15.5

Basic *

Injection quantity adjustment_02

Pump speed r/min 2550 2550 2550

Average injection quantity mm3/st. 4.1

Injection quantity adjustment_03

Pump speed r/min 2440 2440 2440

Average injection quantity mm3/st. 12.2 9.2 15.2

Basic *

Remarks
For Japan

Injection quantity adjustment_04

Pump speed r/min 2550 2550 2550

Average injection quantity mm3/st. 4

Remarks
For Japan

Governor adjustment

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 7.7 5.7 9.7

Difference in delivery mm3/st. 2

Basic *

Governor adjustment_02

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 7.5 5.5 9.5

Governor adjustment_03

Pump speed r/min 450 450 450

Average injection quantity mm3/st. 3.6

Governor adjustment_04

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 7.5 5.5 9.5

Difference in delivery mm3/st. 2

Basic *

Remarks
For Japan

Governor adjustment_05

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 7.7 5.7 9.7

Remarks
For Japan

Governor adjustment_06

Pump speed r/min 450 450 450

Average injection quantity mm3/st. 3.5

Remarks
For Japan

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 66 66

Basic *

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 65 65

Basic *

Remarks
For Japan

Speed control lever angle

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 0 0 0

Remarks
Magnet OFF

Speed control lever angle_02

Pump speed r/min 375 375 375

Average injection quantity mm3/st. 0 0 0

Remarks
For Japan: Magnet OFF

0000000901

Pump speed r/min 1000 1000 1000

Overflow quantity cm3/min 417 288 546

_02

Pump speed r/min 1000 1000 1000

Overflow quantity cm3/min 441 312 570

Remarks
For Japan

Stop lever angle

Pump speed r/min 1500 1500 1500

Pressure kPa 539.5 520 559

Pressure kgf/cm2 5.5 5.3 5.7

Basic *

Stop lever angle_02

Pump speed r/min 1000 1000 1000

Pressure kPa 411.5 382 441

Pressure kgf/cm2 4.2 3.9 4.5

Stop lever angle_03

Pump speed r/min 1500 1500 1500

Pressure kPa 539.5 520 559

Pressure kgf/cm2 5.5 5.3 5.7

Stop lever angle_04

Pump speed r/min 2175 2175 2175

Pressure kPa 686.5 657 716

Pressure kgf/cm2 7 6.7 7.3

Stop lever angle_05

Pump speed r/min 1500 1500 1500

Pressure kPa 529.5 510 549

Pressure kgf/cm2 5.4 5.2 5.6

Basic *

Remarks
For Japan

Stop lever angle_06

Pump speed r/min 1000 1000 1000

Pressure kPa 402 373 431

Pressure kgf/cm2 4.1 3.8 4.4

Remarks
For Japan

Stop lever angle_07

Pump speed r/min 1500 1500 1500

Pressure kPa 529.5 510 549

Pressure kgf/cm2 5.4 5.2 5.6

Remarks
For Japan

Stop lever angle_08

Pump speed r/min 2175 2175 2175

Pressure kPa 676.5 647 706

Pressure kgf/cm2 6.9 6.6 7.2

Remarks
For Japan

0000001101

Pump speed r/min 1500 1500 1500

Timer stroke mm 4.5 4.3 4.7

Basic *

_02

Pump speed r/min 1000 1000 1000

Timer stroke mm 2.3 1.9 2.7

_03

Pump speed r/min 1500 1500 1500

Timer stroke mm 4.5 4.2 4.8

_04

Pump speed r/min 2175 2175 2175

Timer stroke mm 7.4 7 7.8

_05

Pump speed r/min 560 460 660

Remarks
C.D.. cancel speed.

_06

Pump speed r/min 0 0 0

Timer stroke mm 2.9 2.7 3.1

_07

Pump speed r/min 560 460 660

Remarks
C.D.. cancel speed.

_08

Pump speed r/min 1500 1500 1500

Timer stroke mm 4.4 4.2 4.6

Basic *

Remarks
For Japan

_09

Pump speed r/min 1000 1000 1000

Timer stroke mm 2.2 1.8 2.6

Remarks
For Japan

_10

Pump speed r/min 1500 1500 1500

Timer stroke mm 4.4 4.1 4.7

Remarks
For Japan

_11

Pump speed r/min 2175 2175 2175

Timer stroke mm 7.35 6.9 7.8

Remarks
For Japan

_12

Pump speed r/min 600 500 700

Remarks
For Japan: CSD cancel speed

_13

Pump speed r/min 0 0 0

Timer stroke mm 2.9 2.7 3.1

Remarks
For Japan

_14

Pump speed r/min 600 500 700

Remarks
For Japan: CSD cancel speed

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001501

Pump speed r/min 1250 1250 1250

Atmospheric pressure difference kPa -21.9 -22.6 -21.2

Atmospheric pressure difference mmHg -164 -169 -159

Decrease qty mm3/st. 3.6 3.1 4.1

Basic *

_02

Pump speed r/min 1250 1250 1250

Atmospheric pressure difference kPa -21.9 -22.6 -21.2

Atmospheric pressure difference mmHg -164 -169 -159

Decrease qty mm3/st. 3.6 2.6 4.6

_03

Pump speed r/min 1250 1250 1250

Atmospheric pressure difference kPa -21.9 -22.6 -21.2

Atmospheric pressure difference mmHg -164 -169 -159

Decrease qty mm3/st. 3.4 2.9 3.9

Basic *

Remarks
For Japan

_04

Pump speed r/min 1250 1250 1250

Atmospheric pressure difference kPa -21.9 -22.6 -21.2

Atmospheric pressure difference mmHg -164 -169 -159

Decrease qty mm3/st. 3.4 2.4 4.4

Remarks
For Japan

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1.6 1.5 1.7

Control lever angle alpha deg. 17 13 21

Control lever angle beta deg. 39 34 44

Test data Ex:

0000001501 ANEROID COMPENSATOR

ACS adjustment Full load injection quantity at high altitudes and ACS adjusting method 1. Full load injection quantity adjustment (1)Remove the ACS cover and remove the bellows and adjusting shim. (2)Perform all adjustments as per the adjustment standard except for ACS adjustment. 2. ACS adjustment (1)Assemble the ACS cover, bellows and adjusting shim. (2)At N = N1, adjust using shims so that the decrease amount for altitude is as specified in the graph. N:Pump speed X1:Atmospheric pressure X2:Altitude Y:Decrease quantity A:Adjustment value B:Inspection value
----------
N1=1250r/min
----------