Fuel injectors
  1. Home
  2. injection
  3. #1047481800

104748-1800 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047481800 8943235550


104748-1800 INJECTION-PUMP ASSEMBLY
Rating:
30
Buy INJECTION-PUMP ASSEMBLY 104748-1800 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104748-1800 1047481800
ISUZU 8943235550 8943235550

Cross reference number

ZEXEL 104748-1800 1047481800
ISUZU 8943235550 8943235550


Zexel num
Bosch num
Firm num
Name
104748-1800 
104748-1801 
 
8943235550  ISUZU
INJECTION-PUMP ASSEMBLY
4FB1P *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105000-2010
Bosch type code   NP-DN12SD12TT
Nozzle holder   105780-2080
Opening pressure MPa   14.7 14.7 15.19
Opening pressure kgf/cm2   150 150 155
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-840
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   29 28.5 29.5
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   26.5 24.5 28.5
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   29 28 30
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   24 23 25
Difference in delivery mm3/st.   6
Basic   *
Oil temperature degC   50 48 52
Injection quantity adjustment_02
Pump speed r/min   1100 1100 1100
Average injection quantity mm3/st.   3
Oil temperature degC   50 48 52
Injection quantity adjustment_03
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   24 23 25
Difference in delivery mm3/st.   6
Basic   *
Oil temperature degC   50 48 52
Governor adjustment
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.5 5.5 9.5
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   7.5 5.5 9.5
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   45 41.5 48.5
Basic   *
Oil temperature degC   48 46 50
Remarks
Full  
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   45 41.5 48.5
Oil temperature degC   48 46 50
Speed control lever angle
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
0000000901
Pump speed r/min   600 600 600
Overflow quantity cm3/min   320 190 450
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   600 600 600
Pressure kPa   294 274 314
Pressure kgf/cm2   3 2.8 3.2
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   600 600 600
Pressure kPa   294 265 323
Pressure kgf/cm2   3 2.7 3.3
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   850 850 850
Pressure kPa   353 314 392
Pressure kgf/cm2   3.6 3.2 4
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1200
Timer stroke mm   0 0 0
Basic   *
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   16 16 16
Test voltage V   25 24 26
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   2.1 2 2.2
Control lever angle alpha deg.   25 21 29
Control lever angle beta deg.   22 17 27

Test data Ex:

0000001801 STARTING I/Q ADJUSTMENT

Test data 104748-1800
Starting injection quantity adjustment Adjust the adjusting bolt A so that the starting injection quantity adjustment is within the standards. Fix using the nut B. (C) Stop lever L:Adjustment dimensions
----------
L=3.7~7.8mm
----------
L=3.7~7.8mm




Have questions with 104748-1800?





Group cross 104748-1800 ZEXEL

Isuzu 

104748-1800  

104748-1801 
 
8943235550 
INJECTION-PUMP ASSEMBLY
4FB1P
104748-1801  
9 460 612 347 
8943235551 
INJECTION-PUMP ASSEMBLY
4FB1PD
104748-1810  
 
8970309040 
INJECTION-PUMP ASSEMBLY
4EC1
104748-1820  
9 460 620 005 
8970408410 
INJECTION-PUMP ASSEMBLY
4EC1
104748-1830  
9 460 612 348 
8970622570 
INJECTION-PUMP ASSEMBLY
4FE1
104748-1840  
 
 
INJECTION-PUMP ASSEMBLY
104748-1841  
 
 
INJECTION-PUMP ASSEMBLY
104748-1842  

104748-1843 
9 460 613 415 
 
INJECTION-PUMP ASSEMBLY
104748-1843  
 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

104748-1844  
9 460 620 008 
8970786380 
INJECTION-PUMP ASSEMBLY
4EC1
104748-1850  
9 460 620 014 
8971212250 
INJECTION-PUMP ASSEMBLY
4EC1
Back to top