104748-0254 ZEXEL 9 460 612 063 BOSCH INJECTION-PUMP ASSEMBLY 9460612063 1047480254

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104748-0254 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 612 063 9460612063

ZEXEL 104748-0254 1047480254

Components :

0.	INJECTION-PUMP ASSEMBLY	104748-0254
1.	_
2.	FUEL INJECTION PUMP	104648-0253
3.	NUMBER PLATE	146642-3800
4.	_	146672-0220
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105141-2440
8.	Nozzle and Holder	R201 13 640
9.	Open Pre:MPa(Kqf/cm2)	13.2{135}
10.	NOZZLE-HOLDER	105071-0710
11.	NOZZLE	105000-1740

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0320	DRIVE SHAFT
12/1.	[1]	146200-0300	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-1220	ROLLER SET
24.	[1]	146303-0100	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-0220	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-2400	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM D17.5&7.5T0.60
34.	[1]	146302-3400	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0700	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-0100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0020	GUIDE PIN
50.	[1]	146400-5320	HYDRAULIC HEAD
50.	[1]	146400-5320	HYDRAULIC HEAD
50.	[1]	146400-5320	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET D12&6.4T1.00
55.	[4]	146430-0320	DELIVERY-VALVE ASSEMBLY
56.	[4]	146432-0000	COMPRESSION SPRING
58.	[4]	146440-0220	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146502-8121	GOVERNOR COVER
67/1.	[1]	146508-4221	GOVERNOR COVER
67/13.	[1]	146621-1700	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-2800	BLEEDER SCREW
67/16.	[1]	146526-2800	BLEEDER SCREW
67/27.	[1]	146549-2820	LEVER SHAFT
67/76.	[1]	146659-1600	CLAMPING BAND
67/77.	[1]	139106-0300	FLAT-HEAD SCREW M6P1.0H10
67/78.	[1]	146600-4400	SEAL RING
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-0300	THREADED PIN L53.00
67/201B.	[1]	146545-0400	THREADED PIN L55.00
67/201C.	[1]	146545-0500	THREADED PIN L57.00
67/202.	[1]	139208-0100	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146510-5320	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146534-6920	CONTROL LEVER
72B.	[1]	146534-7020	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER
74.	[1]	013020-6040	UNION NUT M6P1H5
75.	[1]	013020-6040	UNION NUT M6P1H5
76.	[1]	014110-6440	LOCKING WASHER
77.	[1]	146602-2100	PLAIN WASHER D36&6.2T2
78.	[1]	146547-0520	CONTROL LEVER
79.	[1]	146547-0720	CONTROL LEVER
80.	[1]	146547-0420	CONTROL LEVER
81.	[1]	146547-0320	CONTROL LEVER
82.	[1]	146616-3300	PLAIN WASHER D24&8.1T1.6
83.	[1]	146616-5000	BUSHING
84.	[2]	146616-5100	BUSHING
84.	[2]	146616-5100	BUSHING
85.	[2]	146549-1900	COILED SPRING
85.	[2]	146549-1900	COILED SPRING
86.	[1]	146549-2120	RACK
94.	[2]	146616-5200	BUSHING
94.	[2]	146616-5200	BUSHING
95.	[1]	146551-2620	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0000	UNION NUT
108.	[1]	146570-0420	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER D20&8.4T1.40
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER D17&6.4T1.60
115.	[1]	146575-1000	SLIDING SLEEVE
116.	[1]	146576-0000	SEALING CAP
117/1.	[1]	146577-1800	PLUG L2.10
117/1.	[1]	146577-1900	PLUG L2.30
117/1.	[1]	146577-2000	PLUG L2.50
117/1.	[1]	146577-2100	PLUG L2.70
117/1.	[1]	146577-2200	PLUG L2.90
117/1.	[1]	146577-2300	PLUG L3.10
117/1.	[1]	146577-2400	PLUG L3.30
117/1.	[1]	146577-2500	PLUG L3.50
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-3200	PLUG L4.90
117/1.	[1]	146577-3300	PLUG L5.10
117/1.	[1]	146577-6700	PLUG L2.2
117/1.	[1]	146577-6800	PLUG L2.4
117/1.	[1]	146577-6900	PLUG L2.6
117/1.	[1]	146577-7000	PLUG L2.8
117/1.	[1]	146577-7100	PLUG L3.0
117/1.	[1]	146577-7200	PLUG L3.2
117/1.	[1]	146577-7300	PLUG L3.4
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
117/1.	[1]	146577-8000	PLUG L4.8
117/1.	[1]	146577-8100	PLUG L5.0
117/1.	[1]	146877-0000	PLUG L5.2
117/1.	[1]	146877-0100	PLUG L5.3
117/1.	[1]	146877-0200	PLUG L5.4
117/1.	[1]	146877-0300	PLUG L5.5
117/1.	[1]	146877-4700	PLUG
117/1.	[1]	146877-4800	PLUG
117/1.	[1]	146877-4900	PLUG
117/1.	[1]	146877-5000	PLUG
123.	[2]	139106-0200	FLAT-HEAD SCREW
124.	[1]	146620-1200	HEX-SOCKET-HEAD CAP SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0920	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-0020	OVER FLOW VALVE
137.	[2]	026512-1540	GASKET D15.4&12.2T1.50
138.	[1]	146605-4020	INLET UNION
200.	[1]	146206-0100	COILED SPRING
205.	[1]	029470-4030	WOODRUFF KEY
220.	[1]	146587-3800	COILED SPRING
221.	[1]	146625-9720	BRACKET
222.	[2]	010206-1840	HEX-SOCKET-HEAD CAP SCREW M6P1L18
235.	[1]	146625-9001	BRACKET
236.	[1]	139106-0500	FLAT-HEAD SCREW M6P1.0H25
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146650-4320	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-0720	WIRE
243.	[1]	146621-1000	UNION NUT
245.	[2]	026512-1540	GASKET D15.4&12.2T1.50
246.	[1]	027412-2440	EYE BOLT
247.	[1]	146605-0520	INLET UNION
275.	[1]	146612-3201	BRACKET
276.	[2]	010010-1640	BLEEDER SCREW M10P1.5L16 4T
280.	[1]	146360-2921	COVER
281.	[1]	146600-0800	O-RING
282.	[2]	139106-1100	FLAT-HEAD SCREW
284.	[1]	146549-3320	RACK
800S.	[1]	146009-4620	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-0320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-2420	REPAIR SET
821S.	[1]	146210-5720	ROLLER SET
903.	[1]	146672-0220	PULSE GENERATOR
903/2.	[1]	146600-1300	O-RING &13W1.9
906.	[1]	146642-3800	NAMEPLATE
924.	[1]	146680-2220	DAMPER
924/1.	[1]	146680-1420	DAMPER
924/2.	[2]	139106-0300	FLAT-HEAD SCREW M6P1.0H10
924/3.	[1]	146628-2100	BRACKET
924/4.	[1]	139106-1100	FLAT-HEAD SCREW
924/5.	[1]	139106-0300	FLAT-HEAD SCREW M6P1.0H10
924/6.	[1]	146443-0100	SPACER BUSHING
924/7.	[1]	139106-0100	FLAT-HEAD SCREW
924/8.	[1]	146602-3600	PLAIN WASHER

Include in #2:

104748-0254 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 612 063 9460612063

ZEXEL 104748-0254 1047480254

Zexel num

Bosch num

Firm num

Name

104748-0254
104748-0255

9 460 612 063

MAZDA

INJECTION-PUMP ASSEMBLY
RF * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Pump speed r/min 1375 1375 1375

Average injection quantity mm3/st. 35.9 35.4 36.4

Difference in delivery mm3/st. 2.5

Basic *

Injection timing adjustment_02

Pump speed r/min 2600 2600 2600

Average injection quantity mm3/st. 12.8 9.8 15.8

Injection timing adjustment_03

Pump speed r/min 2325 2325 2325

Average injection quantity mm3/st. 32.2 30.2 34.2

Injection timing adjustment_04

Pump speed r/min 1375 1375 1375

Average injection quantity mm3/st. 35.9 34.9 36.9

Injection timing adjustment_05

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 31 29 33

Injection quantity adjustment

Pump speed r/min 2600 2600 2600

Average injection quantity mm3/st. 12.8 10.8 14.8

Basic *

Injection quantity adjustment_02

Pump speed r/min 2700 2700 2700

Average injection quantity mm3/st. 6

Governor adjustment

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 8 7 9

Difference in delivery mm3/st. 2

Basic *

Governor adjustment_02

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 8 7 9

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 42 42

Basic *

Speed control lever angle

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 0 0 0

Remarks
Magnet OFF

0000000901

Pump speed r/min 1375 1375 1375

Overflow quantity cm3/min 410 278 542

Stop lever angle

Pump speed r/min 1375 1375 1375

Pressure kPa 460.5 431 490

Pressure kgf/cm2 4.7 4.4 5

Basic *

Stop lever angle_02

Pump speed r/min 600 600 600

Pressure kPa 245.5 216 275

Pressure kgf/cm2 2.5 2.2 2.8

Stop lever angle_03

Pump speed r/min 1375 1375 1375

Pressure kPa 460.5 431 490

Pressure kgf/cm2 4.7 4.4 5

Stop lever angle_04

Pump speed r/min 1800 1800 1800

Pressure kPa 578.5 549 608

Pressure kgf/cm2 5.9 5.6 6.2

Stop lever angle_05

Pump speed r/min 2325 2325 2325

Pressure kPa 706 677 735

Pressure kgf/cm2 7.2 6.9 7.5

0000001101

Pump speed r/min 1375 1375 1375

Timer stroke mm 4.2 4 4.4

Basic *

_02

Pump speed r/min 1375 1375 1375

Timer stroke mm 4.2 3.9 4.5

_03

Pump speed r/min 1800 1800 1800

Timer stroke mm 6.7 6.1 7.3

_04

Pump speed r/min 2325 2325 2325

Timer stroke mm 7.8 7.2 8.4

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1375 1375 1375

Average injection quantity mm3/st. 28.2 27.2 29.2

Timer stroke TA mm 3.6 3.4 3.8

Basic *

_02

Pump speed r/min 1375 1375 1375

Average injection quantity mm3/st. 28.2 26.7 29.7

Timer stroke TA mm 3.6 3.3 3.9

_03

Pump speed r/min 1375 1375 1375

Average injection quantity mm3/st. 16.1 14.6 17.6

Timer stroke TA mm 2.4 1.7 3.1

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1.5 1.4 1.6

Control lever angle alpha deg. 20 16 24

Control lever angle beta deg. 45 40 50

Test data Ex:

0000001801 CDS LEVER/M-CSD ADJUSTMENT

CSD lever assembly adjustment specifications 1. Fixing the side link lever With the side link levers (A), (B) contacting the stopper (C), adjust the length of the connecting rod (E) so that the clearance between side link lever(D)'s hook and levers (A), (B) is L1. 2. Fixing the M-CSD With roller holder advanced 0 deg, adjust lever shaft ball pin so that it contacts roller holder. Then adjust position of M-CSD lever F using screw O so that clearance between M-CSD lever F and stopper G is L2. Fix using nut P. Tighten P to torque T. 3. Fixing the CSD lever and the side link lever connecting rod Move CSD lever (F) through full stroke (until it contacts other stopper). Adjust length of rod (H) connecting side link lever (I) and CSD lever (F) so that position of control lever (J) on top of pump is a (L3) and fix. (Target speed NE.) 4. Fix using the pump supporting bracket With the bracket Q pushed in the direction of the arrow, set the distance between the bracket Q and the bolt R to L4 and fix using the bolt R. U = at from idle to A
----------
L1=0.5+1mm L2=0.5+2mm L3=4.9+-1mm L4=0mm T=6~9N-m(0.6~0.9kgf-m) a=7.5deg NE=-r/min
----------
L1=0.5+-1mm L2=0.5+2mm T=6~9N-m(0.6~0.9kgf-m) L3=4.9+-1mm a=7.5deg L4=0mm

0000001901 DASHPOT ADJUSTMENT

Adjustment of the dash pot Adjust screw (C) so that the end of screw (C) contacts the end of the dashpot when the control lever (A) is a (clearance L) from the idle position. Then, fix using the nut (D). (B) = dashpot
----------
L=8.5mm a=13deg
----------
L=8.5mm