104746-6623 ZEXEL 9 460 613 430 BOSCH INJECTION-PUMP ASSEMBLY 9460613430 1047466623 8972042014

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104746-6623 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 613 430 9460613430

ZEXEL 104746-6623 1047466623

ISUZU 8972042014 8972042014

Components :

0.	INJECTION-PUMP ASSEMBLY	104746-6623
1.	_
2.	FUEL INJECTION PUMP	104646-6623
3.	NUMBER PLATE	146969-2800
4.	_	146672-4620
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY	105118-7373
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)	19.5{199}/26.5{270}
10.	NOZZLE-HOLDER	105048-2201
11.	NOZZLE	105019-1260

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0300	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-1920	DRIVE SHAFT
12/1.	[1]	146200-1900	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
12/5.	[1]	146206-0400	COILED SPRING
17.	[1]	146204-0100	PLAIN WASHER
20.	[1]	146210-7920	ROLLER SET
24.	[1]	146303-0400	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0300	SLOTTED WASHER
29.	[1]	146220-6720	CAM PLATE
30.	[1]	146600-5400	GASKET
30.	[1]	146600-5400	GASKET
31.	[1]	146300-5300	PUMP PLUNGER
32.	[1]	146301-0500	SLIDING PIECE
33.	[1]	146603-0700	SHIM D17.5&7.5T0.60
34.	[1]	146306-4100	COMPRESSION SPRING
34B.	[1]	146306-4200	COMPRESSION SPRING
34C.	[1]	146306-4300	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-5400	GASKET
37.	[1]	146310-0000	COVER
38.	[2]	146622-0300	BLEEDER SCREW
39.	[1]	146310-5500	COVER
40.	[2]	146622-0300	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0720	GUIDE PIN
50.	[1]	146402-4720	HYDRAULIC HEAD
50.	[1]	146402-4720	HYDRAULIC HEAD
50.	[1]	146402-4720	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET D12&6.4T1.00
58.	[4]	149300-0520	PRESSURE-CONTROL VALVE
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146760-6520	MANIFOLD-PRESSURE COMP.
67/1.	[1]	146806-4520	GOVERNOR COVER
67/13.	[1]	146621-1700	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-3000	BLEEDER SCREW
67/15.	[1]	146526-3000	BLEEDER SCREW
67/16.	[1]	146526-3000	BLEEDER SCREW
67/23.	[1]	146935-5900	BRACKET
67/24.	[1]	139006-4500	BLEEDER SCREW
67/31.	[1]	146710-0800	BUSHING
67/32.	[1]	146711-0000	PLATE
67/33.	[1]	139218-0400	UNION NUT
67/34.	[1]	146712-0700	BEARING PIN
67/35.	[1]	146621-0300	UNION NUT
67/36.	[1]	146600-1400	O-RING
67/37.	[1]	146710-1400	BUSHING
67/38.	[1]	139506-0200	GASKET D8.9&6.8T1.00
67/39.	[1]	146620-9500	CAPSULE
67/40.	[1]	026512-1540	GASKET D15.4&12.2T1.50
67/41.	[1]	146713-4100	ADJUSTING PIN
67/42.	[2]	146714-0000	PLATE
67/43.	[1]	146715-0000	DIAPHRAGM
67/44.	[1]	139306-0100	LOCKING WASHER
67/45.	[1]	013030-6040	UNION NUT M6P1H3.6
67/46.	[1]	146716-0000	UNION NUT
67/47.	[1]	146717-4400	COILED SPRING
67/48/1.	[1]	146720-0000	SPACER BUSHING L3.7
67/48/1.	[1]	146720-0100	SPACER BUSHING L3.9
67/48/1.	[1]	146720-0200	SPACER BUSHING L4.1
67/48/1.	[1]	146720-0300	SPACER BUSHING L4.3
67/48/1.	[1]	146720-0400	SPACER BUSHING L4.5
67/48/1.	[1]	146720-0500	SPACER BUSHING L4.7
67/48/1.	[1]	146720-0600	SPACER BUSHING L4.9
67/48/1.	[1]	146720-0700	SPACER BUSHING L5.1
67/48/1.	[1]	146720-0800	SPACER BUSHING L5.3
67/48/1.	[1]	146720-0900	SPACER BUSHING L2.7
67/48/1.	[1]	146720-1000	SPACER BUSHING L2.9
67/48/1.	[1]	146720-1100	SPACER BUSHING L3.1
67/48/1.	[1]	146720-1200	SPACER BUSHING L3.3
67/48/1.	[1]	146720-1300	SPACER BUSHING L3.5
67/48/1.	[1]	146720-1400	SPACER BUSHING L2.8
67/48/1.	[1]	146720-1500	SPACER BUSHING L3.0
67/48/1.	[1]	146720-1600	SPACER BUSHING L3.2
67/48/1.	[1]	146720-1700	SPACER BUSHING L3.4
67/48/1.	[1]	146720-1800	SPACER BUSHING L3.6
67/48/1.	[1]	146720-1900	SPACER BUSHING L3.8
67/48/1.	[1]	146720-2000	SPACER BUSHING L4.0
67/48/1.	[1]	146720-2100	SPACER BUSHING L4.2
67/48/1.	[1]	146720-2200	SPACER BUSHING L4.4
67/48/1.	[1]	146720-2300	SPACER BUSHING L4.6
67/48/1.	[1]	146720-2400	SPACER BUSHING L4.8
67/48/1.	[1]	146720-2500	SPACER BUSHING L5.0
67/48/1.	[1]	146720-2600	SPACER BUSHING L5.2
67/48/1.	[1]	146720-2700	SPACER BUSHING L5.4
67/48/1.	[1]	146720-2800	SPACER BUSHING L5.5
67/48/1.	[1]	146720-2900	SPACER BUSHING L5.6
67/48/1.	[1]	146720-4500	SPACER BUSHING L1.8
67/48/1.	[1]	146720-4600	SPACER BUSHING L1.9
67/48/1.	[1]	146720-4700	SPACER BUSHING L2.0
67/48/1.	[1]	146720-4800	SPACER BUSHING L2.1
67/48/1.	[1]	146720-4900	SPACER BUSHING L2.2
67/48/1.	[1]	146720-5000	SPACER BUSHING L2.3
67/48/1.	[1]	146720-5100	SPACER BUSHING L2.4
67/48/1.	[1]	146720-5200	SPACER BUSHING L2.5
67/48/1.	[1]	146720-5300	SPACER BUSHING L2.6
67/48/1.	[1]	146725-2500	SPACER BUSHING L5.7
67/48/1.	[1]	146725-2600	SPACER BUSHING L5.8
67/48/1.	[1]	146725-2700	SPACER BUSHING L5.9
67/48/1.	[1]	146725-2800	SPACER BUSHING L6.0
67/48/1.	[1]	146725-2900	SPACER BUSHING L6.1
67/48/1.	[1]	146725-3000	SPACER BUSHING L6.2
67/48/1.	[1]	146725-3100	SPACER BUSHING L6.3
67/48/1.	[1]	146725-3200	SPACER BUSHING L6.4
67/48/1.	[1]	146725-3300	SPACER BUSHING L6.5
67/48/1.	[1]	146725-3400	SPACER BUSHING L6.6
67/48/1.	[1]	146725-3500	SPACER BUSHING L6.7
67/48/1.	[1]	146725-3600	SPACER BUSHING L6.8
67/48/1.	[1]	146725-3700	SPACER BUSHING L6.9
67/48/1.	[1]	146725-3800	SPACER BUSHING L7.0
67/48/1.	[1]	146725-3900	SPACER BUSHING L7.1
67/48/1.	[1]	146725-4000	SPACER BUSHING L7.2
67/48/1.	[1]	146725-4100	SPACER BUSHING L7.3
67/48/1.	[1]	146725-4200	SPACER BUSHING L7.4
67/48/1.	[1]	146725-4300	SPACER BUSHING L7.5
67/49.	[1]	146721-3820	COVER
67/50.	[1]	146722-0200	FLAT-HEAD SCREW
67/51.	[1]	146600-0300	O-RING
67/53.	[1]	013020-6040	UNION NUT M6P1H5
67/53.	[1]	013020-6040	UNION NUT M6P1H5
67/54.	[2]	139006-4500	BLEEDER SCREW
67/55.	[2]	139006-4800	BLEEDER SCREW
67/56.	[1]	146723-1120	CONTROL LEVER
67/57.	[1]	146712-0100	BEARING PIN
67/58.	[2]	146620-0600	CAPSULE
67/59.	[2]	026506-1040	GASKET D9.9&6.2T1
67/60.	[1]	146724-0300	ELEMENT
67/61.	[1]	146724-0600	CAPSULE
67/64.	[1]	146935-6000	BRACKET
67/68.	[1]	139006-4400	BLEEDER SCREW
67/78.	[1]	146600-4400	SEAL RING
67/83.	[1]	146717-4200	COILED SPRING
67/98.	[2]	146648-2800	SPACER BUSHING
67/112.	[1]	146934-9920	BRACKET
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-3400	THREADED PIN L53.00
67/201B.	[1]	146545-3500	THREADED PIN L55.00
67/201C.	[1]	146545-3600	THREADED PIN L57.00
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146810-9420	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146830-4200	CONTROL LEVER
72B.	[1]	146830-4300	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER
75.	[1]	013020-6040	UNION NUT M6P1H5
95.	[1]	146865-8720	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0100	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER D20&8.4T1.40
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER D17&6.4T1.60
115.	[1]	146975-4200	SLIDING SLEEVE
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-1800	PLUG L2.10
117/1.	[1]	146577-1900	PLUG L2.30
117/1.	[1]	146577-2000	PLUG L2.50
117/1.	[1]	146577-2100	PLUG L2.70
117/1.	[1]	146577-2200	PLUG L2.90
117/1.	[1]	146577-2300	PLUG L3.10
117/1.	[1]	146577-2400	PLUG L3.30
117/1.	[1]	146577-2500	PLUG L3.50
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-3200	PLUG L4.90
117/1.	[1]	146577-3300	PLUG L5.10
117/1.	[1]	146577-6700	PLUG L2.2
117/1.	[1]	146577-6800	PLUG L2.4
117/1.	[1]	146577-6900	PLUG L2.6
117/1.	[1]	146577-7000	PLUG L2.8
117/1.	[1]	146577-7100	PLUG L3.0
117/1.	[1]	146577-7200	PLUG L3.2
117/1.	[1]	146577-7300	PLUG L3.4
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
117/1.	[1]	146577-8000	PLUG L4.8
117/1.	[1]	146577-8100	PLUG L5.0
117/1.	[1]	146877-0000	PLUG L5.2
117/1.	[1]	146877-0100	PLUG L5.3
117/1.	[1]	146877-0200	PLUG L5.4
117/1.	[1]	146877-0300	PLUG L5.5
117/1.	[1]	146877-4700	PLUG
117/1.	[1]	146877-4800	PLUG
117/1.	[1]	146877-4900	PLUG
117/1.	[1]	146877-5000	PLUG
123.	[4]	146620-0500	HEX-SOCKET-HEAD CAP SCREW
130.	[1]	146421-1620	CAPSULE
130/2.	[1]	146422-1100	BLEEDER SCREW
130/3.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0620	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-2620	OVER FLOW VALVE
137.	[2]	139512-0500	GASKET
138.	[1]	146666-8420	INLET UNION
159.	[1]	146625-8000	PLATE
160.	[1]	020105-0940	BLEEDER SCREW
205.	[1]	025804-1610	WOODRUFF KEY
206.	[1]	013121-4140	UNION NUT M14P1.5H11
207.	[1]	029321-4050	LOCKING WASHER
220.	[1]	146587-1900	COILED SPRING
221.	[1]	146930-7121	BRACKET
222.	[1]	146620-9900	BLEEDER SCREW
224.	[2]	139006-4400	BLEEDER SCREW
225.	[1]	146930-7200	BRACKET
231.	[1]	010206-2240	HEX-SOCKET-HEAD CAP SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-7320	WIRE
243.	[1]	146621-1000	UNION NUT
245.	[3]	139512-0500	GASKET
246.	[1]	146125-0000	EYE BOLT
247.	[1]	146669-8520	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
260.	[1]	146611-2120	BRACKET
261.	[2]	146621-4700	UNION NUT
262.	[1]	139008-0900	BLEEDER SCREW
264.	[1]	016500-5010	O-RING
270.	[1]	146615-5220	TOOTHED GEAR
270/1.	[1]	146615-5200	TOOTHED GEAR
270/2.	[1]	146615-0201	COUPLING PLATE
270/3.	[6]	020006-1870	BLEEDER SCREW M6P1L18 7T
280.	[1]	146361-5320	START ADVANCE ASSY
281.	[1]	146600-0800	O-RING
282.	[1]	010206-1240	HEX-SOCKET-HEAD CAP SCREW M6P1L12
287.	[1]	020306-3070	BLEEDER SCREW
310.	[1]	146685-3420	POTENTCIOMETER
310/2.	[2]	139104-0400	FLAT-HEAD SCREW
310/3.	[1]	146648-2900	JOINT CONNECTION
310/3B.	[1]	146648-3000	JOINT CONNECTION
310/3C.	[1]	146648-3100	JOINT CONNECTION
310/3D.	[1]	146648-3200	JOINT CONNECTION
310/3E.	[1]	146648-3300	JOINT CONNECTION
310/3F.	[1]	146649-7700	JOINT CONNECTION
310/3G.	[1]	146649-7800	JOINT CONNECTION
310/3H.	[1]	146649-7900	JOINT CONNECTION
310/3I.	[1]	146649-8000	JOINT CONNECTION
310/3J.	[1]	146649-8100	JOINT CONNECTION
310/3K.	[1]	146649-8200	JOINT CONNECTION
310/3L.	[1]	146649-8300	JOINT CONNECTION
310/4.	[1]	146661-0601	BOOT
800S.	[1]	146020-0220	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-1320	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-5520	REPAIR SET
821S.	[1]	146210-7820	ROLLER SET
835S.	[1]	146598-1000	CAP
836S/1.	[1]	146598-0600	CAP L18
836S/1.	[1]	146598-0700	CAP L21
836S/1.	[1]	146598-0800	CAP L24
836S/1.	[1]	146598-0900	CAP L27
839S.	[1]	146421-1820	CAPSULE
839S/2.	[1]	146422-1100	BLEEDER SCREW
839S/3.	[1]	146600-0500	O-RING
903.	[1]	146672-4620	PULSE GENERATOR
903/2.	[1]	146600-1300	O-RING &13W1.9
905.	[1]	146679-2420	ADJUSTING DEVICE
906.	[1]	146969-2800	NAMEPLATE
912.	[2]	139006-5700	BLEEDER SCREW

Include in #2:

104746-6623 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 613 430 9460613430

ZEXEL 104746-6623 1047466623

ISUZU 8972042014 8972042014

Zexel num

Bosch num

Firm num

Name

104746-6623
104746-6624

9 460 613 430

8972042014 ISUZU

INJECTION-PUMP ASSEMBLY
4JB1-TC * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Outer diameter - inner diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Left L

Timer measuring device installation position
Low pressure side LOW PRESSURE SIDE

Injection timing adjustment

Pump speed r/min 500 500 500

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60.5 60 61

Difference in delivery mm3/st. 5

Basic *

Oil temperature degC 48 46 50

Remarks
NA

Injection timing adjustment_02

Pump speed r/min 800 800 800

Boost pressure kPa 52 50.7 53.3

Boost pressure mmHg 390 380 400

Average injection quantity mm3/st. 67.4 66.9 67.9

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 50 48 52

Remarks
CBS

Injection timing adjustment_03

Pump speed r/min 800 800 800

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 76.8 76.3 77.3

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Remarks
Full

Injection timing adjustment_04

Pump speed r/min 500 500 500

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60.5 59.5 61.5

Difference in delivery mm3/st. 5

Basic *

Oil temperature degC 48 46 50

Remarks
NA

Injection timing adjustment_05

Pump speed r/min 800 800 800

Boost pressure kPa 52 50.7 53.3

Boost pressure mmHg 390 380 400

Average injection quantity mm3/st. 67.4 66.4 68.4

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 50 48 52

Remarks
CBS

Injection timing adjustment_06

Pump speed r/min 800 800 800

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 76.8 75.8 77.8

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Remarks
Full

Injection timing adjustment_07

Pump speed r/min 1000 1000 1000

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 83.8 77.3 90.3

Oil temperature degC 50 48 52

Injection timing adjustment_08

Pump speed r/min 1250 1250 1250

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 91.5 85 98

Oil temperature degC 50 48 52

Injection timing adjustment_09

Pump speed r/min 1700 1700 1700

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 105.7 99.2 112.2

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2075 2075 2075

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 34 31 37

Difference in delivery mm3/st. 7

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2300 2300 2300

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 3

Oil temperature degC 52 50 54

Injection quantity adjustment_03

Pump speed r/min 2075 2075 2075

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Average injection quantity mm3/st. 34 31 37

Difference in delivery mm3/st. 7

Basic *

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 13.9 11.9 15.9

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 13.9 11.9 15.9

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60 60 100

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 60 60 100

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 375 375 375

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Overflow quantity cm3/min 1240 1010 1470

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 471 442 500

Pressure kgf/cm2 4.8 4.5 5.1

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1020 1020 1020

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 353 314 392

Pressure kgf/cm2 3.6 3.2 4

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1250 1250 1250

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 432 393 471

Pressure kgf/cm2 4.4 4 4.8

Oil temperature degC 50 48 52

Stop lever angle_04

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 471 442 500

Pressure kgf/cm2 4.8 4.5 5.1

Basic *

Oil temperature degC 50 48 52

Stop lever angle_05

Pump speed r/min 1500 1500 1500

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 510 471 549

Pressure kgf/cm2 5.2 4.8 5.6

Oil temperature degC 50 48 52

Stop lever angle_06

Pump speed r/min 1800 1800 1800

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Pressure kPa 608 569 647

Pressure kgf/cm2 6.2 5.8 6.6

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 1.8 1.6 2

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1020 1020 1020

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 0.5

Oil temperature degC 50 48 52

_03

Pump speed r/min 1350 1350 1350

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 1.8 1.6 2

Basic *

Oil temperature degC 50 48 52

_04

Pump speed r/min 1500 1500 1500

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 3 2.6 3.4

Oil temperature degC 50 48 52

_05

Pump speed r/min 1800 1800 1800

Boost pressure kPa 80 78.7 81.3

Boost pressure mmHg 600 590 610

Timer stroke mm 4.5 4.2 4.9

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

Timing setting

K dimension mm 3.6 3.5 3.7

KF dimension mm 7.76 7.66 7.86

MS dimension mm 0.5 0.4 0.6

BCS stroke mm 2.6 2.4 2.8

Pre-stroke mm 0.2 0.18 0.22

Control lever angle alpha deg. 18 14 22

Control lever angle beta deg. 39 34 44

Test data Ex:

0000001601 BOOST COMPENSATOR ADJUSTMENT

BCS adjustment procedure 1. At full boost pressure, set so that the full injection quantity is within the specifications (adjusting point). 2. Perform boost compensator intermediate operation point adjustment (pump speed N1, boost pressure P1). 3. When injection quantity at boost pressure P2 and pump speed N2 is not as specified, loosen nut (A) and adjust position of screw (B) so that injection quantity is as specified. The screw position should be within +-1 turn of initial position. 4. The nut tightening torque is T.
----------
N1=800r/min N2=500r/min P1=52.0kPa(390mmHg) P2=0kPa(0mmHg) T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)

0000001801 POTENTIOMETER ADJUSTMENT

Potentiometer adjusting specifications (oval) N:Pump speed Q:Injection quantity P:Boost pressure V:Output voltage C/L: control lever position I:Idle F:Full lever position B:Adjusting point C:Checking point D:Bracket (shape may differ) Adjusting method (applied voltage Vi, dummy bolt method) 1. Hold the dummy bolt (A) against the control lever at position N = N1 and Q = Q1 and fix using the lock nut. 2. At potentiometer adjustment, with the control lever contacting the dummy bolt, adjust the potentiometer so that the output voltage is V1. 3. After completing adjustment, remove the dummy bolt (A) and confirm that the potentiometer output voltage is within the adjustment specifications when the control lever is in the idle position. (A): Dummy bolt and nut part number 146526-3300 (bolt) corresponding to 42 (mm). Corresponding to 013020-6040 (nut)
----------
N1=1080r/min Q1=27.5+-1.0mm3/st V1=3.56+-0.03V Vi=10V
----------
N1=1080r/min N2=375r/min P1=0kPa(0mmHg) Q1=27.5+-1.0mm3/st Q2=13.9+-2.0mm3/st V1=3.56+-0.03V V2=(0.93+-0.45V) V3=(7.43+-0.83V)

0000001901 V-FICD ADJUSTMENT

Adjustment of the V-FICD 1. Insert a shim L1 between the control lever (A) and the idle adjusting screw (B) and adjust using the FICD adjusting screw (C) so that the actuator moves through its full stroke. Then, fix using nut (D). If adjustment with the FICD adjusting screw (C) is not possible, adjust by moving the actuator stroke with (E) and (F). 2. Apply P1 to the actuator and confirm the full stroke. After release, confirm that the gap between the control lever (A) and the FICD adjusting screw (C) is at least L2. (G) L2 or above at actuator release (H) Actuator stroke L3
----------
P1=-53.3kPa(-400mmHg) L1=0.90+-0.1mm L2=0.5mm L3=5mm
----------
L1=0.90+-0.1mm T1=3.4~4.9N-m(0.35~0.50kgf-m) T2=1.2~1.5N-m(0.12~0.15kgf-m)

0000002001 W-CSD ADJUSTMENT

Adjustment of the W-CSD Adjustment of the timer advance angle 1. Determine the timer advance angle using the graph. TA=-0.0328t+2.62(-20<=t<=20) TA=-0.0492t+2.95(20<=t<=60) 2. Adjust using screw so that the timer advance angle determined in item (1) is obtained. Then fix using nut (B). (a) Screw (B)SW8 (Tightening torque T1) X:Temperature t (deg C) Y:Timer stroke TA (mm) (S) Cooling water temperature: increase direction (R) Cooling water temperature (deg C) (T) Timer piston stroke (mm) Standard point K N:Pump speed
----------

----------
T1=3.4~4.9N-m(0.35~0.5kgf-m) N1=500r/min a=20deg b=-20deg c=2.0+-0.4mm d=3.3+-0.5mm