104746-6391 ZEXEL 9 460 611 499 BOSCH INJECTION-PUMP ASSEMBLY 9460611499 1047466391


104746-6391 INJECTION-PUMP ASSEMBLY
Rating:
25
Buy INJECTION-PUMP ASSEMBLY 104746-6391 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 611 499 9460611499
ZEXEL 104746-6391 1047466391

Components :

0. INJECTION-PUMP ASSEMBLY 104746-6391
1. _
2. FUEL INJECTION PUMP 104646-6391
3. NUMBER PLATE 146968-3100
4. _ 146672-4620
5. CAPSULE
6. ADJUSTING DEVICE 146679-2420
7. NOZZLE AND HOLDER ASSY 105148-1293
8. Nozzle and Holder 8-97069-780-2
9. Open Pre:MPa(Kqf/cm2) 14.7{150}
10. NOZZLE-HOLDER 105078-0150
11. NOZZLE 105007-1271

Scheme ###:

1/6. [1] 146601-0700 PACKING RING
6. [1] 146100-0120 SUPPLY PUMP
9. [1] 146103-0000 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0320 DRIVE SHAFT
12/1. [1] 146200-0300 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-5220 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2120 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146300-2400 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
33. [1] 146603-3600 SHIM
34. [1] 146302-3400 COMPRESSION SPRING
34B. [1] 146302-3500 COMPRESSION SPRING
34C. [1] 146302-3300 COMPRESSION SPRING
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-0800 O-RING
37. [1] 146310-0700 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [2] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [2] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [2] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [2] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [2] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [2] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [2] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [2] 146690-1400 SHIM D17&5.2T0.9
48/1. [2] 146690-1500 SHIM D17&5.2T1.1
48/1. [2] 146690-1600 SHIM D17&5.2T1.3
48/1. [2] 146690-1700 SHIM D17&5.2T1.4
48/1. [2] 146690-1800 SHIM D17&5.2T1.6
48/1. [2] 146690-1900 SHIM D17&5.2T1.7
48/1. [2] 146690-5800 SHIM
48/1. [2] 146690-5900 SHIM
48/1. [2] 146690-6000 SHIM
48/1. [2] 146690-6100 SHIM
48/1. [2] 146690-6200 SHIM
48/1. [2] 146690-6300 SHIM
48/1. [2] 146690-6400 SHIM
48/1. [2] 146690-6500 SHIM
48/1. [2] 146690-6600 SHIM
48/1. [2] 146690-6700 SHIM
48/1. [2] 146690-6800 SHIM
48/1. [2] 146690-6900 SHIM
48/1. [2] 146690-7000 SHIM
48/1. [2] 146690-7100 SHIM
48/1. [2] 146690-7200 SHIM
48/1. [2] 146690-7300 SHIM
48/1. [2] 146690-7400 SHIM
48/1. [2] 146690-7500 SHIM
48/1. [2] 146690-7800 SHIM
49. [2] 146234-0020 GUIDE PIN
50. [1] 146403-4820 HYDRAULIC HEAD
50. [1] 146403-4820 HYDRAULIC HEAD
50. [1] 146403-4820 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET
55. [4] 146430-0320 DELIVERY-VALVE ASSEMBLY VE4
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0120 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
67. [1] 146820-9020 GOVERNOR COVER
67/1. [1] 146505-3521 GOVERNOR COVER
67/2. [1] 146515-3720 CONTROL SHAFT
67/3. [1] 146600-0100 O-RING
67/4. [1] 139310-0200 PLAIN WASHER
67/5. [1] 146830-4200 CONTROL LEVER STAMP 042
67/5B. [1] 146830-4300 CONTROL LEVER STAMP 043
67/6. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
67/7. [1] 013020-6040 UNION NUT
67/13. [1] 146621-1700 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/15. [1] 146526-2800 BLEEDER SCREW
67/16. [1] 146526-2800 BLEEDER SCREW
67/18. [1] 146592-5900 COILED SPRING
67/19. [1] 146541-3000 BUSHING
67/21. [1] 146592-5800 COILED SPRING
67/22. [1] 146541-3100 SLOTTED WASHER
67/78. [1] 146600-4400 SEAL RING
67/98. [1] 139006-4400 BLEEDER SCREW
67/100. [1] 146931-2100 BRACKET
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-4100 THREADED PIN
67/201B. [1] 146545-4200 THREADED PIN
67/201C. [1] 146545-4300 THREADED PIN
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
95. [1] 146861-1820 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0420 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146575-7800 SLIDING SLEEVE STAMP 78
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
120. [1] 146579-0820 RETAINING PIN
122. [1] 146580-0900 GOVERNOR SPRING
123. [4] 139106-0200 FLAT-HEAD SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0920 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-1520 OVER FLOW VALVE
137. [2] 139512-0500 GASKET
138. [1] 146666-0520 INLET UNION
200. [1] 146206-0100 COILED SPRING
205. [1] 029470-4030 WOODRUFF KEY
206. [1] 013121-4140 UNION NUT
207. [1] 029321-4050 LOCKING WASHER
221. [1] 146930-7121 BRACKET
224. [3] 139006-4400 BLEEDER SCREW
224. [3] 139006-4400 BLEEDER SCREW
225. [1] 146930-7200 BRACKET
231. [1] 010206-2240 HEX-SOCKET-HEAD CAP SCREW
232. [1] 146659-0200 PLATE
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-1220 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
242. [1] 146658-7320 WIRE
243. [1] 146621-1000 UNION NUT
245. [3] 139512-0500 GASKET
246. [1] 146125-0000 EYE BOLT
247. [1] 146666-8321 INLET UNION
248. [1] 146614-0200 SPACER BUSHING
249. [1] 139006-4400 BLEEDER SCREW
260. [1] 146611-0720 BRACKET
261. [2] 146621-4700 UNION NUT
264. [1] 016500-5010 O-RING
270. [1] 146615-3720 TOOTHED GEAR
270/1. [1] 146615-2000 TOOTHED GEAR
270/2. [1] 146615-3700 COUPLING PLATE
270/3. [6] 020006-1870 BLEEDER SCREW
280. [1] 146361-1721 START ADVANCE ASSY
281. [1] 146600-0800 O-RING
282. [1] 010206-1240 HEX-SOCKET-HEAD CAP SCREW
286. [1] 014010-6140 PLAIN WASHER D13&6.5T1.0
287. [1] 020106-3040 BLEEDER SCREW
800S. [1] 146018-4620 PUMP HOUSING
800S/1/6. [1] 146601-0700 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
903. [1] 146672-4620 PULSE GENERATOR
903/2. [1] 146600-1300 O-RING
905. [1] 146679-2420 ADJUSTING DEVICE
906. [1] 146968-3100 NAMEPLATE
912. [2] 139006-5700 BLEEDER SCREW

Include in #2:

104746-6391 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 611 499 9460611499
ZEXEL 104746-6391 1047466391


Zexel num
Bosch num
Firm num
Name
104746-6391 
104746-6392 
9 460 611 499 
   
INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   52 51.5 52.5
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   51.6 51.6 51.6
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   52 51 53
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1440 1440 1440
Average injection quantity mm3/st.   49.2 49.2 49.2
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   51 51 51
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   2100 2100 2100
Average injection quantity mm3/st.   19.6 16.6 22.6
Difference in delivery mm3/st.   5.5
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_02
Pump speed r/min   2300 2300 2300
Average injection quantity mm3/st.   5
Oil temperature degC   52 50 54
Injection quantity adjustment_03
Pump speed r/min   2100 2100 2100
Average injection quantity mm3/st.   19.6 16.6 22.6
Difference in delivery mm3/st.   5.5
Basic   *
Oil temperature degC   52 50 54
Governor adjustment
Pump speed r/min   360 360 360
Average injection quantity mm3/st.   13.2 11.2 15.2
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   360 360 360
Average injection quantity mm3/st.   13.2 11.2 15.2
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   69 69 109
Oil temperature degC   48 46 50
Remarks
Full
 
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   69 69 109
Oil temperature degC   48 46 50
Remarks
Full
 
Speed control lever angle
Pump speed r/min   360 360 360
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1000 1000 1000
Overflow quantity cm3/min   680 550 810
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1000 1000 1000
Pressure kPa   402 382 422
Pressure kgf/cm2   4.1 3.9 4.3
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   1000 1000 1000
Pressure kPa   402 382 422
Pressure kgf/cm2   4.1 3.8 4.4
Basic   *
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1000 1000 1000
Timer stroke mm   3.1 2.9 3.3
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   500 500 500
Timer stroke mm   0.5 0.1 1.3
Oil temperature degC   48 46 50
_03
Pump speed r/min   1000 1000 1000
Timer stroke mm   3.1 2.9 3.3
Basic   *
Oil temperature degC   50 48 52
_04
Pump speed r/min   1440 1440 1440
Timer stroke mm   5.3 4.9 5.7
Oil temperature degC   50 48 52
_05
Pump speed r/min   1950 1950 1950
Timer stroke mm   7.8 7.5 8.2
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   22.9 22.4 23.4
Timer stroke TA mm   2.8 2.8 2.8
Timer stroke variation dT mm   0.3 0.1 0.5
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   22.9 21.9 23.9
Timer stroke TA mm   2.8 2.8 2.8
Timer stroke variation dT mm   0.3 -0.1 0.7
Basic   *
Oil temperature degC   50 48 52
_03
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   7.8 6.8 8.8
Timer stroke TA mm   2.1 2.1 2.1
Timer stroke variation dT mm   1 0.4 1.6
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   0.7 0.6 0.8
Pre-stroke mm   0.1 0.08 0.12
Control lever angle alpha deg.   18 14 22
Control lever angle beta deg.   31 26 36

Test data Ex:

0000001801 W-CSD ADJUSTMENT

Test data 104746-6391
Adjustment of the W-CSD Adjustment of the timer advance angle 1. Determine the timer advance angle using the graph. 2. Adjust with the screw (A) so that the timer advance angle determined in item 1 is obtained. X:Temperature t (deg C) Y:Timer stroke TA (mm) (S) Cooling water temperature: increase direction (R) Cooling water temperature (deg C) (T) Timer piston stroke (mm) (B) Standard point N:Pump speed
----------

----------
SW=SW8 T=3.4~4.9Nm(0.35~0.5kgfm) (C):TA(mm)=-0.0328t+2.62(-20degC<=t<=20degC) TA(mm)=-0.0492t+2.95(20degC<=t<=60degC)

0000001901 V-FICD ADJUSTMENT

Test data 104746-6391
Adjustment of the V-FICD 1. Insert a shim L1 between the control lever (A) and the idle adjusting screw (B) and adjust using the FICD adjusting screw (C) so that the actuator moves through its full stroke. Then, fix using nut (D). If adjustment with the FICD adjusting screw (C) is not possible, adjust by moving the actuator stroke with (E) and (F). 2. Apply P1{P2} pressure to the actuator and confirm that the actuator moves through its full stroke. After release, confirm that the gap between control lever (A) and FICD adjusting screw (C) is at least L2. (G): exceeds L2 when releasing actuator (H): actuator stroke L3
----------
L1=1.40+-0.1mm L2=0.5mm P1=-53.3kPa P2=-400mmHg
----------
L1=0.90+-0.1mm T=3.4~4.9N-m{0.35~0.50kgf-m}




Have questions with 104746-6391?





Group cross 104746-6391 ZEXEL

Isuzu 

9 460 611 034 
8971491590 
INJECTION-PUMP ASSEMBLY
D201-03
 
8971604620 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 611 374 
8971604621 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 611 712 
8971611760 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 613 307 
8971714400 
INJECTION-PUMP ASSEMBLY
4JB1-TC
9 460 611 452 
8971741030 
INJECTION-PUMP ASSEMBLY
4JB1-TC
9 460 611 360 
8971385273 
INJECTION-PUMP ASSEMBLY
D201-02
9 460 611 453 
8971725350 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 613 970 
8971725351 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 611 454 
8971725360 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 611 455 
8971730740 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 611 456 
 
INJECTION-PUMP ASSEMBLY
104746-6391  

104746-6392 
9 460 611 499 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 460 614 602 
8971770360 
INJECTION-PUMP ASSEMBLY
4JG2
Back to top