104746-6060 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047466060 8971334400


104746-6060 INJECTION-PUMP ASSEMBLY
Rating:
28
Buy INJECTION-PUMP ASSEMBLY 104746-6060 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104746-6060 1047466060
ISUZU 8971334400 8971334400

Cross reference number

ZEXEL 104746-6060 1047466060
ISUZU 8971334400 8971334400


Zexel num
Bosch num
Firm num
Name
104746-6060 
104746-6061 
 
8971334400  ISUZU
INJECTION-PUMP ASSEMBLY
4JA1 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   51.8 51.3 52.3
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   30.8 27.3 34.3
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   35.8 32.3 39.3
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1150 1150 1150
Average injection quantity mm3/st.   51.8 50.8 52.8
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   2050 2050 2050
Average injection quantity mm3/st.   61.9 57.4 66.4
Oil temperature degC   52 50 54
Injection quantity adjustment
Pump speed r/min   2350 2350 2350
Average injection quantity mm3/st.   40.6 37.6 43.6
Difference in delivery mm3/st.   8
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_02
Pump speed r/min   2700 2700 2700
Average injection quantity mm3/st.   12
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2350 2350 2350
Average injection quantity mm3/st.   40.6 37.6 43.6
Difference in delivery mm3/st.   8
Basic   *
Oil temperature degC   52 50 54
Governor adjustment
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   8.4 6.4 10.4
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   8.4 6.4 10.4
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 60 100
Basic   *
Oil temperature degC   48 46 50
Remarks
Full
 
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 60 100
Oil temperature degC   48 46 50
Remarks
Full
 
Speed control lever angle
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1500 1500 1500
Overflow quantity with S/T OFF cm3/min   450 320 580
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1400 1400 1400
Pressure with S/T OFF kPa   412 392 432
Pressure with S/T OFF kgf/cm2   4.2 4 4.4
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
Stop lever angle_02
Pump speed r/min   1400 1400 1400
Pressure with S/T OFF kPa   412 392 432
Pressure with S/T OFF kgf/cm2   4.2 4 4.4
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
0000001101
Pump speed r/min   1400 1400 1400
Timer stroke with S/T OFF mm   2.7 2.5 2.9
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_02
Pump speed r/min   700 700 700
Timer stroke with S/T ON mm   0.5 0.5
Oil temperature degC   50 48 52
_03
Pump speed r/min   1400 1400 1400
Timer stroke with S/T OFF mm   2.7 2.5 2.9
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_04
Pump speed r/min   1600 1600 1600
Timer stroke with S/T OFF mm   3.9 3.5 4.3
Oil temperature degC   50 48 52
_05
Pump speed r/min   1950 1950 1950
Timer stroke with S/T OFF mm   5.3 5 5.7
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001501
Pump speed r/min   1150 1150 1150
Height m   2000 2000 2000
Atmospheric pressure difference kPa   -21.9 -21.9 -21.9
Atmospheric pressure difference mmHg   -164 -164 -164
Average injection quantity mm3/st.   42.5 41.5 43.5
Decrease qty mm3/st.   9.3 9.3 9.3
Decrease rate %   18 15 21
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   1150 1150 1150
Height m   0 0 0
Atmospheric pressure difference kPa   0 0 0
Atmospheric pressure difference mmHg   0 0 0
Decrease qty mm3/st.   0 0 0
Decrease rate %   0 0 0
Oil temperature degC   50 48 52
_03
Pump speed r/min   1150 1150 1150
Height m   500 500 500
Atmospheric pressure difference kPa   5.9 2.6 9.2
Atmospheric pressure difference mmHg   -44 -69 -19
Oil temperature degC   50 48 52
Remarks
Point of inflection
 
_04
Pump speed r/min   1150 1150 1150
Height m   2000 2000 2000
Atmospheric pressure difference kPa   -21.9 -21.9 -21.9
Atmospheric pressure difference mmHg   -164 -164 -164
Decrease qty mm3/st.   9.8 8.3 11.3
Decrease rate %   18 15 21
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.1 3 3.2
KF dimension mm   5.5 5.4 5.6
MS dimension mm   0.8 0.7 0.9
Pre-stroke mm   0.45 0.43 0.47
Control lever angle alpha deg.   18 14 22
Control lever angle beta deg.   37 32 42

Test data Ex:

0000001801 V-FICD ADJUSTMENT

Test data 104746-6060
Adjustment of the V-FICD 1. Adjust the actuator rod to obtain S1. 2. Apply negative pressure P1 kPa {P2 mmHg} to the actuator and confirm that it moves through its full stroke. (A) Control lever (Idling position)
----------
S1=1+1mm P1=-53.3kPa P2=-400mmHg
----------
S1=1+1mm




Have questions with 104746-6060?





Group cross 104746-6060 ZEXEL

Isuzu 

 
8971334340 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 153 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 460 611 568 
8971334341 
INJECTION-PUMP ASSEMBLY
4JA1
 
8971334350 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 305 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 460 611 569 
8971334351 
INJECTION-PUMP ASSEMBLY
4JA1
 
8971334360 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 154 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 460 611 570 
8971334361 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 718 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

 
8971334371 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 155 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 460 611 571 
8971334372 
INJECTION-PUMP ASSEMBLY
4JA1
 
8971334380 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 373 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 460 611 572 
8971334381 
INJECTION-PUMP ASSEMBLY
4JA1
 
8971334390 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 450 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 460 611 625 
8971334391 
INJECTION-PUMP ASSEMBLY
4JA1
104746-6060  

104746-6061 
 
8971334400 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 611 392 
 
INJECTION-PUMP ASSEMBLY

Isuzu 

9 460 611 626 
8971334401 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 614 591 
8971323530 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 614 592 
8971323540 
INJECTION-PUMP ASSEMBLY
4JB1-T
9 460 614 593 
8971323550 
INJECTION-PUMP ASSEMBLY
4JB1-T
Back to top