104746-5831 ZEXEL F 01G 09W 0FD BOSCH INJECTION-PUMP ASSEMBLY f01g09w0fd 1047465831 8980220031

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104746-5831 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09W 0FD f01g09w0fd

ZEXEL 104746-5831 1047465831

ISUZU 8980220031 8980220031

Components :

0.	INJECTION-PUMP ASSEMBLY	104746-5831
1.	_
2.	FUEL INJECTION PUMP	104646-5820
3.	NUMBER PLATE
4.	_	146672-1720
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)
10.	NOZZLE-HOLDER
11.	NOZZLE

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0400	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-1920	DRIVE SHAFT
12/1.	[1]	146200-1900	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
12/5.	[1]	146206-0400	COILED SPRING
17.	[1]	146204-0100	PLAIN WASHER
20.	[1]	146210-7720	ROLLER SET
24.	[1]	146303-0400	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0301	SLOTTED WASHER
29.	[1]	146220-7220	CAM PLATE
30.	[1]	146600-6200	GASKET
31.	[1]	146300-5300	PUMP PLUNGER
32.	[1]	146301-0500	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146306-4500	COMPRESSION SPRING
34B.	[1]	146306-2400	COMPRESSION SPRING
34C.	[1]	146302-5600	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-6200	GASKET
37.	[1]	146310-0000	COVER
38.	[2]	146622-0300	BLEEDER SCREW
39.	[1]	146310-5500	COVER
40.	[2]	146622-0300	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0800	GUIDE PIN
50.	[1]	146402-5220	HYDRAULIC HEAD
50.	[1]	146402-5220	HYDRAULIC HEAD
50.	[1]	146402-5220	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET
58.	[4]	149300-0521	PRESSURE-CONTROL VALVE
60.	[4]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146504-5620	GOVERNOR COVER
67/1.	[1]	146806-7920	GOVERNOR COVER
67/13.	[1]	013020-6040	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-2800	BLEEDER SCREW
67/16.	[1]	146526-2800	BLEEDER SCREW
67/23.	[1]	146936-1300	BRACKET
67/24.	[2]	139006-4500	BLEEDER SCREW
67/64.	[1]	146936-2920	BRACKET
67/68.	[2]	139006-4400	BLEEDER SCREW
67/69.	[1]	146620-6100	BLEEDER SCREW
67/78.	[1]	146600-4400	SEAL RING
67/102.	[1]	146935-7700	BRACKET
67/103.	[1]	139006-4800	BLEEDER SCREW
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-4600	THREADED PIN L=24MM
67/201B.	[1]	146545-4700	THREADED PIN L=26MM
67/201C.	[1]	146545-4800	THREADED PIN L=28MM
67/202.	[1]	146598-5000	UNION NUT
67/203.	[1]	146600-1200	O-RING
67/204.	[1]	146545-4500	DAMPER
68.	[1]	146811-1920	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146831-1800	CONTROL LEVER STAMP:118
72B.	[1]	146831-1900	CONTROL LEVER STAMP:119
72C.	[1]	146832-7900	CONTROL LEVER
72D.	[1]	146832-8000	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
75.	[1]	013020-6040	UNION NUT
95.	[1]	146855-0320	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1.0
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0100	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-2600	PLAIN WASHER
115.	[1]	146975-4200	SLIDING SLEEVE
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-1800	PLUG L2.10
117/1.	[1]	146577-1900	PLUG L2.30
117/1.	[1]	146577-2000	PLUG L2.50
117/1.	[1]	146577-2100	PLUG L2.70
117/1.	[1]	146577-2200	PLUG L2.90
117/1.	[1]	146577-2300	PLUG L3.10
117/1.	[1]	146577-2400	PLUG L3.30
117/1.	[1]	146577-2500	PLUG L3.50
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-3200	PLUG L4.90
117/1.	[1]	146577-3300	PLUG L5.10
117/1.	[1]	146577-6700	PLUG L2.2
117/1.	[1]	146577-6800	PLUG L2.4
117/1.	[1]	146577-6900	PLUG L2.6
117/1.	[1]	146577-7000	PLUG L2.8
117/1.	[1]	146577-7100	PLUG L3.0
117/1.	[1]	146577-7200	PLUG L3.2
117/1.	[1]	146577-7300	PLUG L3.4
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
117/1.	[1]	146577-8000	PLUG L4.8
117/1.	[1]	146577-8100	PLUG L5.0
117/1.	[1]	146877-0000	PLUG L5.2
117/1.	[1]	146877-0100	PLUG L5.3
117/1.	[1]	146877-0200	PLUG L5.4
117/1.	[1]	146877-0300	PLUG L5.5
117/1.	[1]	146877-4700	PLUG L5.6
117/1.	[1]	146877-4800	PLUG L5.7
117/1.	[1]	146877-4900	PLUG L5.8
117/1.	[1]	146877-5000	PLUG L5.9
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-1620	CAPSULE
130/2.	[1]	146422-1100	BLEEDER SCREW
130/3.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0620	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-2620	OVER FLOW VALVE
137.	[2]	139512-0500	GASKET
138.	[1]	146677-4020	INLET UNION
158.	[1]	020105-0940	BLEEDER SCREW
159.	[1]	146625-8000	PLATE
163.	[1]	139006-5700	BLEEDER SCREW
205.	[1]	029470-4030	WOODRUFF KEY
220.	[1]	146587-5000	COILED SPRING
240.	[1]	146650-1220	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-7320	WIRE
243.	[1]	146621-4901	UNION NUT
245.	[2]	139512-0500	GASKET
246.	[1]	146125-0600	EYE BOLT
247.	[1]	146677-8120	INLET UNION
260.	[1]	146611-2121	BRACKET
261.	[2]	146621-4700	UNION NUT
262.	[1]	139008-0900	BLEEDER SCREW
264.	[1]	016500-5010	O-RING
310.	[1]	146685-6720	POTENTCIOMETER
310/3.	[2]	139104-0400	FLAT-HEAD SCREW
310/4.	[1]	146648-2900	JOINT CONNECTION
310/4B.	[1]	146648-3000	JOINT CONNECTION
310/4C.	[1]	146648-3100	JOINT CONNECTION
310/4D.	[1]	146648-3200	JOINT CONNECTION
310/4E.	[1]	146648-3300	JOINT CONNECTION
310/4F.	[1]	146648-4700	JOINT CONNECTION
310/4G.	[1]	146648-5300	JOINT CONNECTION
310/4H.	[1]	146649-1700	JOINT CONNECTION
310/4I.	[1]	146649-7700	JOINT CONNECTION
310/4K.	[1]	146649-7900	JOINT CONNECTION
310/4M.	[1]	146649-8100	JOINT CONNECTION
310/4O.	[1]	146649-8300	JOINT CONNECTION
310/4P.	[1]	146649-9400	JOINT CONNECTION
310/5.	[1]	146661-0601	BOOT
800S.	[1]	146020-2020	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-1320	COMPRESSION SPRING
805S.	[1]	146574-0920	PARTS SET
810S.	[1]	146600-6320	REPAIR SET
821S.	[1]	146210-7820	ROLLER SET
835S.	[1]	146598-7320	CAP
836S/1.	[1]	146598-0600	CAP L18
836S/1.	[1]	146598-0700	CAP L21
836S/1.	[1]	146598-0800	CAP L24
836S/1.	[1]	146598-0900	CAP L27
839S.	[1]	146421-1820	CAPSULE
903.	[1]	146672-1720	PULSE GENERATOR
903/2.	[1]	146600-1300	O-RING
905.	[1]	146679-6820	ADJUSTING DEVICE
906.	[1]	146979-7600	NAMEPLATE
912.	[1]	139006-4700	BLEEDER SCREW
913.	[1]	013020-6040	UNION NUT

Include in #2:

104746-5831 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09W 0FD f01g09w0fd

ZEXEL 104746-5831 1047465831

ISUZU 8980220031 8980220031

Zexel num

Bosch num

Firm num

Name

104746-5831

F 01G 09W 0FD

8980220031 ISUZU

INJECTION-PUMP ASSEMBLY
4JA1-L

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Left L

Timer measuring device installation position
Low pressure side LOW PRESSURE SIDE

Injection timing adjustment

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 72.7 72.2 73.2

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 54.8 49.3 60.3

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 64.5 59 70

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 71.4 65.9 76.9

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 1100 1100 1100

Average injection quantity mm3/st. 72.7 71.7 73.7

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_06

Pump speed r/min 1900 1900 1900

Average injection quantity mm3/st. 83.9 79.4 88.4

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2350 2350 2350

Average injection quantity mm3/st. 28.4 25.4 31.4

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2600 2600 2600

Average injection quantity mm3/st. 5

Oil temperature degC 55 52 58

Injection quantity adjustment_03

Pump speed r/min 2350 2350 2350

Average injection quantity mm3/st. 28.4 25.4 31.4

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 365 365 365

Average injection quantity mm3/st. 10.6 8.6 12.6

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 365 365 365

Average injection quantity mm3/st. 10.6 8.6 12.6

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 90 70 110

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 90 70 110

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 365 365 365

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1600 1600 1600

Overflow quantity cm3/min 1380 1150 1610

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1600 1600 1600

Pressure kPa 598 578 618

Pressure kgf/cm2 6.1 5.9 6.3

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1500 1500 1500

Pressure kPa 569 540 598

Pressure kgf/cm2 5.8 5.5 6.1

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1600 1600 1600

Pressure kPa 598 578 618

Pressure kgf/cm2 6.1 5.9 6.3

Basic *

Oil temperature degC 50 48 52

Stop lever angle_04

Pump speed r/min 1900 1900 1900

Pressure kPa 696 667 725

Pressure kgf/cm2 7.1 6.8 7.4

Oil temperature degC 50 48 52

Stop lever angle_05

Pump speed r/min 2200 2200 2200

Pressure kPa 824 765 883

Pressure kgf/cm2 8.4 7.8 9

Oil temperature degC 52 50 54

0000001101

Pump speed r/min 1600 1600 1600

Timer stroke mm 2.5 2.3 2.7

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1300 1300 1300

Timer stroke mm 0.5

Oil temperature degC 50 48 52

_03

Pump speed r/min 1600 1600 1600

Timer stroke mm 2.5 2.3 2.7

Basic *

Oil temperature degC 50 48 52

_04

Pump speed r/min 1800 1800 1800

Timer stroke mm 4.1 3.7 4.5

Oil temperature degC 50 48 52

_05

Pump speed r/min 2200 2200 2200

Timer stroke mm 4.8 4.5 5.2

Oil temperature degC 52 50 54

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

Timing setting

K dimension mm 3.6 3.5 3.7

KF dimension mm 7.7 7.6 7.8

MS dimension mm 0.8 0.7 0.9

Pre-stroke mm 0.2 0.18 0.22

Control lever angle alpha deg. 18 14 22

Control lever angle beta deg. 37 32 42

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Adjusting method (applied voltage Vi, dummy bolt method) 1. Hold the dummy bolt against the control lever at position N = N1 and Q = Q1 and fix using the lock nut. 2. At potentiometer adjustment, with the control lever contacting the dummy bolt, adjust the potentiometer so that the output voltage is V1. 3. After completing adjustment remove the dummy bolt. Confirm that the potentiometer output voltage is as specified above at the control lever idle position and full position. N:Pump speed Q:Injection quantity V:Output voltage A:Adjusting point B:Checking point I:Idle F:Full speed (C) Corresponding to dummy bolt 146526-3300 (D) Corresponding to nut 013020-6040 (E) Dummy bolt installation bracket
----------
N1=1420r/min Q1=26.2+-1.0mm3/st V1=4.33+-0.03V Vi=10V
----------
N1=1420r/min Q1=26.2+-1.0mm3/st V1=4.33+-0.03V V2=(1.53+-0.61V) V3=7.70+-0.72V

0000001901 V-FICD ADJUSTMENT

Adjustment of the V-FICD 1. Mount the V-FICD after the completion of potentiometer adjustment. 2. Confirm that the clearance between the control lever (B) and the actuator rod (A) is at least L2. 3. Insert the L1 shim between the control lever (D) and the idle set screw (C). 4. Adjust the stroke adjusting screw (E) so that the actuator moves through its full stroke, then fix using nut (F). Note When adjustment is not possible using the stroke adjusting screw (E), move the actuator rod position using (G), (H) and (I). Then, readjust the stroke using (E) and (F). 5. Apply negative pressure P1 to the actuator and confirm the full stroke. 6. After releasing negative pressure, re-confirm that the clearance between (A) and (B) is at least L2.
----------
L1=1.1+-0.1mm L2=1mm P1=-53.3kPa(-400mmHg)
----------
L1=1.1+-0.1mm L2=1mm T1=1.4~2.0Nm(0.14~0.20kgfm) T2=3.4~4.9Nm(0.35~0.50kgfm)

0000002001 TAMPER PROOF

Tamperproof installation procedure Full load adjusting screw seal A:Cap B:Nut (torque T) C:Rubber vibration damper (confirm position) L1:Inspection dimension (1)Confirm the position of the rubber vibration damper and tighten the nut (torque T).
----------
T=7~9N-m(0.7~0.9kgf-m) L1=23~28mm
----------
L1=23~28mm