Rating:
Information injection-pump assembly
BOSCH
9 460 610 827
9460610827
ZEXEL
104746-1152
1047461152
ISUZU
8970868111
8970868111
Components :
0. | INJECTION-PUMP ASSEMBLY | 104746-1152 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104646-1152 |
3. | NUMBER PLATE | 146923-9500 |
4. | _ | 146672-1720 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | 146679-2022 |
7. | NOZZLE AND HOLDER ASSY | 105158-2311 |
8. | Nozzle and Holder | 8-97088-674-0 |
9. | Open Pre:MPa(Kqf/cm2) | 14.7{150} |
10. | NOZZLE-HOLDER | 105088-1130 |
11. | NOZZLE | 105007-1271 |
Scheme ###:
1/6. | [1] | 146601-0700 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0320 | DRIVE SHAFT |
12/1. | [1] | 146200-0300 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-0620 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0020 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-0400 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM |
34. | [1] | 146302-3400 | COMPRESSION SPRING |
34B. | [1] | 146302-3300 | COMPRESSION SPRING |
34C. | [1] | 146302-3500 | COMPRESSION SPRING |
34D. | [1] | 146302-3600 | COMPRESSION SPRING |
35/1. | [0] | 146603-0700 | SHIM |
35/1. | [0] | 146603-0800 | SHIM |
35/1. | [0] | 146603-0900 | SHIM |
35/1. | [0] | 146603-1000 | SHIM |
35/1. | [0] | 146603-1100 | SHIM |
35/1. | [0] | 146603-3600 | SHIM |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0700 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [2] | 146603-0100 | SHIM |
48/1. | [2] | 146603-0200 | SHIM |
48/1. | [2] | 146603-0300 | SHIM |
48/1. | [2] | 146603-0400 | SHIM |
48/1. | [2] | 146690-1400 | SHIM |
48/1. | [2] | 146690-1500 | SHIM |
48/1. | [2] | 146690-1600 | SHIM |
48/1. | [2] | 146690-1700 | SHIM |
48/1. | [2] | 146690-1800 | SHIM |
49. | [2] | 146234-0020 | GUIDE PIN |
50. | [1] | 146403-3920 | HYDRAULIC HEAD |
50. | [1] | 146403-3920 | HYDRAULIC HEAD |
50. | [1] | 146403-3920 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0200 | SHIM |
52/1. | [1] | 146420-0700 | SHIM |
52/1. | [1] | 146420-1200 | SHIM |
52/1. | [1] | 146420-1700 | SHIM |
52/1. | [1] | 146420-2200 | SHIM |
52/1. | [1] | 146420-2700 | SHIM |
52/1. | [1] | 146420-3200 | SHIM |
52/1. | [1] | 146420-3700 | SHIM |
52/1. | [1] | 146420-5600 | SHIM |
54. | [4] | 146433-0100 | GASKET |
55. | [4] | 146430-0320 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0000 | COMPRESSION SPRING |
58. | [4] | 146440-0120 | FITTING |
60. | [4] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146752-5522 | MANIFOLD-PRESSURE COMP. |
67/1. | [1] | 146805-7420 | GOVERNOR COVER |
67/13. | [1] | 013020-6040 | UNION NUT |
67/14. | [1] | 146621-1700 | UNION NUT |
67/15. | [1] | 146526-1800 | BLEEDER SCREW |
67/16. | [1] | 146526-3000 | BLEEDER SCREW |
67/23. | [1] | 146926-8500 | BRACKET |
67/24. | [2] | 139006-4500 | BLEEDER SCREW |
67/31. | [1] | 146710-0800 | BUSHING |
67/32. | [1] | 146711-0000 | PLATE |
67/33. | [1] | 139218-0400 | UNION NUT |
67/34. | [1] | 146712-0700 | BEARING PIN |
67/35. | [1] | 146621-0300 | UNION NUT |
67/36. | [1] | 146600-1400 | O-RING |
67/37. | [1] | 146710-0100 | BUSHING |
67/38. | [1] | 139506-0200 | GASKET |
67/39. | [1] | 146620-0300 | CAPSULE |
67/40. | [1] | 026512-1540 | GASKET |
67/41. | [1] | 146713-4100 | ADJUSTING PIN |
67/42. | [2] | 146714-0000 | PLATE |
67/43. | [1] | 146715-0000 | DIAPHRAGM |
67/44. | [1] | 139306-0100 | LOCKING WASHER |
67/45. | [1] | 013030-6040 | UNION NUT |
67/46. | [1] | 146716-0000 | UNION NUT |
67/47. | [1] | 146717-0300 | COILED SPRING |
67/48/1. | [1] | 146720-0300 | SPACER BUSHING |
67/48/1. | [1] | 146720-0400 | SPACER BUSHING |
67/48/1. | [1] | 146720-0500 | SPACER BUSHING |
67/48/1. | [1] | 146720-0600 | SPACER BUSHING |
67/48/1. | [1] | 146720-0700 | SPACER BUSHING |
67/48/1. | [1] | 146720-0800 | SPACER BUSHING |
67/48/1. | [1] | 146720-2100 | SPACER BUSHING |
67/48/1. | [1] | 146720-2200 | SPACER BUSHING |
67/48/1. | [1] | 146720-2300 | SPACER BUSHING |
67/48/1. | [1] | 146720-2400 | SPACER BUSHING |
67/48/1. | [1] | 146720-2500 | SPACER BUSHING |
67/48/1. | [1] | 146720-2600 | SPACER BUSHING |
67/48/1. | [1] | 146720-2700 | SPACER BUSHING |
67/49. | [1] | 146721-3020 | COVER |
67/54. | [4] | 139006-4400 | BLEEDER SCREW |
67/55. | [1] | 139006-4600 | BLEEDER SCREW |
67/56. | [1] | 146723-0300 | CONTROL LEVER |
67/57. | [1] | 146712-0100 | BEARING PIN |
67/58. | [2] | 146620-0600 | CAPSULE |
67/59. | [2] | 026506-1040 | GASKET |
67/60. | [1] | 146724-0300 | ELEMENT |
67/61. | [1] | 146724-0600 | CAPSULE |
67/78. | [1] | 146600-4400 | SEAL RING |
67/100. | [1] | 146928-5700 | BRACKET |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-3400 | THREADED PIN |
67/201B. | [1] | 146545-3500 | THREADED PIN |
67/201C. | [1] | 146545-3600 | THREADED PIN |
67/202. | [1] | 139208-0900 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146514-3621 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146539-5701 | CONTROL LEVER |
72B. | [1] | 146539-5801 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT |
95. | [1] | 146565-8420 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0420 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM |
110/1. | [1] | 146571-0100 | SHIM |
110/1. | [1] | 146571-0200 | SHIM |
110/1. | [1] | 146571-0300 | SHIM |
110/1. | [1] | 146571-0400 | SHIM |
111. | [1] | 146602-0600 | PLAIN WASHER |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER |
115. | [1] | 146875-8000 | SLIDING SLEEVE |
116. | [1] | 146576-0200 | CAP |
117/1. | [1] | 146577-2500 | PLUG |
117/1. | [1] | 146577-2600 | PLUG |
117/1. | [1] | 146577-2700 | PLUG |
117/1. | [1] | 146577-2800 | PLUG |
117/1. | [1] | 146577-2900 | PLUG |
117/1. | [1] | 146577-3000 | PLUG |
117/1. | [1] | 146577-3100 | PLUG |
117/1. | [1] | 146577-3200 | PLUG |
117/1. | [1] | 146577-7300 | PLUG |
117/1. | [1] | 146577-7400 | PLUG |
117/1. | [1] | 146577-7500 | PLUG |
117/1. | [1] | 146577-7600 | PLUG |
117/1. | [1] | 146577-7700 | PLUG |
117/1. | [1] | 146577-7800 | PLUG |
117/1. | [1] | 146577-7900 | PLUG |
117/1. | [1] | 146577-8000 | PLUG |
117/1. | [1] | 146577-8100 | PLUG |
123. | [4] | 146620-0500 | HEX-SOCKET-HEAD CAP SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0920 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-1520 | OVER FLOW VALVE |
137. | [2] | 139512-0500 | GASKET |
138. | [1] | 146665-5620 | INLET UNION |
160. | [1] | 146625-8020 | PLATE |
200. | [1] | 146206-0100 | COILED SPRING |
205. | [1] | 029470-4030 | WOODRUFF KEY |
206. | [1] | 013121-4140 | UNION NUT |
207. | [1] | 029321-4050 | LOCKING WASHER |
217. | [1] | 146541-2900 | SLOTTED WASHER |
218. | [1] | 146592-4300 | COILED SPRING |
219. | [1] | 146541-3000 | BUSHING |
220. | [1] | 146592-4400 | COILED SPRING |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146658-7320 | WIRE |
243. | [1] | 146621-1000 | UNION NUT |
245. | [2] | 139512-0500 | GASKET |
246. | [1] | 027412-2440 | EYE BOLT |
247. | [1] | 146609-4620 | INLET UNION |
260. | [1] | 146611-0720 | BRACKET |
261. | [2] | 146621-4700 | UNION NUT |
264. | [1] | 016500-5010 | O-RING |
270. | [1] | 146615-3820 | TOOTHED GEAR |
270/1. | [1] | 146615-2600 | TOOTHED GEAR |
270/2. | [1] | 146615-3700 | COUPLING PLATE |
270/3. | [6] | 020006-1870 | BLEEDER SCREW |
275. | [1] | 146612-6220 | BRACKET |
276. | [2] | 010210-1640 | HEX-SOCKET-HEAD CAP SCREW |
280. | [1] | 146361-0023 | START ADVANCE ASSY |
281. | [1] | 146600-0800 | O-RING |
282. | [2] | 010206-1240 | HEX-SOCKET-HEAD CAP SCREW |
287. | [1] | 139006-6600 | BLEEDER SCREW |
800S. | [1] | 146018-1420 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0700 | PACKING RING |
804S. | [1] | 146232-0320 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
812S. | [1] | 146600-1920 | PARTS SET |
821S. | [1] | 146210-5720 | ROLLER SET |
835S. | [1] | 146598-1000 | CAP |
836S/1. | [1] | 146598-0600 | CAP |
836S/1. | [1] | 146598-0700 | CAP |
836S/1. | [1] | 146598-0800 | CAP |
836S/1. | [1] | 146598-0900 | CAP |
903. | [1] | 146672-1720 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING |
905. | [1] | 146679-2022 | ADJUSTING DEVICE |
906. | [1] | 146923-9500 | NAMEPLATE |
912. | [1] | 139006-4600 | BLEEDER SCREW |
913. | [1] | 139006-4700 | BLEEDER SCREW |
Include in #2:
104746-1152
as INJECTION-PUMP ASSEMBLY
Cross reference number
BOSCH
9 460 610 827
9460610827
ZEXEL
104746-1152
1047461152
ISUZU
8970868111
8970868111
Zexel num
Bosch num
Firm num
Name
9 460 610 827
8970868111 ISUZU
INJECTION-PUMP ASSEMBLY
4JG2-TC K 11CJ INJECTION PUMP ASSY VE4 VE
4JG2-TC K 11CJ INJECTION PUMP ASSY VE4 VE
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113orSAEJ967d
1404 Test oil ISO4113orSAEJ967d
Test oil temperature
degC
45
45
50
Nozzle
105780-0060
Bosch type code
NP-DN0SD1510
Nozzle holder
105780-2150
Opening pressure
MPa
13
13
13.3
Opening pressure
kgf/cm2
133
133
136
Injection pipe
157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450
Inside diameter - outside diameter - length (mm) mm 2-6-450
Joint assembly
157641-4720
Tube assembly
157641-4020
Transfer pump pressure
kPa
20
20
20
Transfer pump pressure
kgf/cm2
0.2
0.2
0.2
Direction of rotation (viewed from drive side)
Left L
Left L
Injection timing adjustment
Pump speed
r/min
1000
1000
1000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
69.7
69.2
70.2
Difference in delivery
mm3/st.
3.5
Basic
*
Remarks
Full
Full
Injection timing adjustment_02
Pump speed
r/min
600
600
600
Boost pressure
kPa
30
28.7
31.3
Boost pressure
mmHg
225
215
235
Average injection quantity
mm3/st.
63.8
63.3
64.3
Difference in delivery
mm3/st.
4.5
Basic
*
Remarks
CBS
CBS
Injection timing adjustment_03
Pump speed
r/min
2300
2300
2300
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
34.6
31.1
38.1
Injection timing adjustment_04
Pump speed
r/min
1800
1800
1800
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
67.5
63
72
Injection timing adjustment_05
Pump speed
r/min
1000
1000
1000
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
53.5
49
58
Injection timing adjustment_06
Pump speed
r/min
1000
1000
1000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
69.7
68.7
70.7
Remarks
Full
Full
Injection timing adjustment_07
Pump speed
r/min
750
750
750
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
53.8
49.8
57.8
Injection timing adjustment_08
Pump speed
r/min
600
600
600
Boost pressure
kPa
30
28.7
31.3
Boost pressure
mmHg
225
215
235
Average injection quantity
mm3/st.
63.8
62.8
64.8
Remarks
CBS
CBS
Injection quantity adjustment
Pump speed
r/min
2300
2300
2300
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
34.6
31.6
37.6
Difference in delivery
mm3/st.
5.5
Basic
*
Injection quantity adjustment_02
Pump speed
r/min
2550
2550
2550
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
5
Governor adjustment
Pump speed
r/min
375
375
375
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
15.8
13.8
17.8
Difference in delivery
mm3/st.
2
Basic
*
Governor adjustment_02
Pump speed
r/min
600
600
600
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
3
Governor adjustment_03
Pump speed
r/min
375
375
375
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
15.8
13.3
18.3
Timer adjustment
Pump speed
r/min
100
100
100
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
105
60
150
Basic
*
Remarks
IDLE
IDLE
Speed control lever angle
Pump speed
r/min
375
375
375
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
0
0
0
Remarks
Magnet OFF
Magnet OFF
0000000901
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Overflow quantity
cm3/min
648
498
798
Stop lever angle
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Pressure
kPa
490
470
510
Pressure
kgf/cm2
5
4.8
5.2
Basic
*
Stop lever angle_02
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Pressure
kPa
490
470
510
Stop lever angle_03
Pump speed
r/min
1500
1500
1500
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Pressure
kPa
549
510
588
Stop lever angle_04
Pump speed
r/min
2000
2000
2000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Pressure
kPa
677
638
716
0000001101
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Timer stroke
mm
3.3
3.1
3.5
Basic
*
_02
Pump speed
r/min
1000
1000
1000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Timer stroke
mm
2.1
1.5
2.7
_03
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Timer stroke
mm
3.3
3
3.6
_04
Pump speed
r/min
1500
1500
1500
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Timer stroke
mm
4.5
3.9
5.1
_05
Pump speed
r/min
2000
2000
2000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Timer stroke
mm
6.6
6.2
7
0000001201
Max. applied voltage
V
8
8
8
Test voltage
V
13
12
14
0000001401
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
47.9
46.9
48.9
Timer stroke variation dT
mm
0.9
0.7
1.1
Basic
*
_02
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
47.9
46.4
49.4
Timer stroke variation dT
mm
0.9
0.6
1.2
_03
Pump speed
r/min
1250
1250
1250
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
31.3
29.8
32.8
Timer stroke variation dT
mm
1.9
1.4
2.4
Timing setting
K dimension
mm
3.3
3.2
3.4
KF dimension
mm
5.8
5.7
5.9
MS dimension
mm
0.7
0.6
0.8
BCS stroke
mm
3.3
3.2
3.4
Control lever angle alpha
deg.
24
20
28
Control lever angle beta
deg.
45
40
50
Test data Ex:
0000001801 W-CSD ADJUSTMENT
Adjustment of the W-CSD
1. Adjustment of the advance angle of the timer
(1)Determine the timer advance angle from the graph in Fig. 2 (D).
(2)(1) Adjust with the screw so that the timer advance angle determined in the item (1) is obtained.
(C) Fig. 1
(D) Fig. 2
(A): TA+-0.1
(B): Timer stroke TA:
X:Temperature X
Y:Timer stroke TA (mm)
----------
----------
(B)=-10<=t(degC)<=20:TA=-0.0367t+1.284 (D)=20<=t(degC)<=40:TA=-0.0275t+1.1
----------
----------
(B)=-10<=t(degC)<=20:TA=-0.0367t+1.284 (D)=20<=t(degC)<=40:TA=-0.0275t+1.1
0000001901 V-FICD ADJUSTMENT
Adjustment of the V-FICD
1. Mount the V-FICD after the completion of potentiometer adjustment.
2. Confirm that the clearance between the control lever (B) and the actuator rod (A) is at least L1.
3. Insert the L2 shim between the control lever (D) and the idle set screw (C).
4. Adjust the stroke adjusting screw (E) so that the actuator moves through its full stroke, then fix using nut (F).
Note
When adjustment is not possible using the stroke adjusting screw (E), move the actuator rod position using (G), (H) and (I).
Adjust again the stroke with (E) and (F).
5. Apply negative pressure P1 {P2} to the actuator and confirm that it moves through its full stroke.
6. After releasing negative pressure, re-confirm that the clearance between (A) and (B) is at least L1.
----------
L1=1mm L2=2.19+-0.1mm P1=-53.3kPa P2=-400mmHg
----------
L1=1++mm L2=2.19+-0.1mm T1=3.4~4.9Nm(0.35~0.50kgfm) T2=1.4~2.0Nm(0.14~0.20kgfm)
----------
L1=1mm L2=2.19+-0.1mm P1=-53.3kPa P2=-400mmHg
----------
L1=1++mm L2=2.19+-0.1mm T1=3.4~4.9Nm(0.35~0.50kgfm) T2=1.4~2.0Nm(0.14~0.20kgfm)