Fuel injectors
  1. Home
  2. injection
  3. #1047458644

104745-8644 ZEXEL F 01G 09W 0F6 BOSCH INJECTION-PUMP ASSEMBLY f01g09w0f6 1047458644 md351410


104745-8644 INJECTION-PUMP ASSEMBLY
Rating:
51
Buy INJECTION-PUMP ASSEMBLY 104745-8644 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09W 0F6 f01g09w0f6
ZEXEL 104745-8644 1047458644
MITSUBISHI MD351410 md351410

Components :

0. INJECTION-PUMP ASSEMBLY 104745-8644
1. _
2. FUEL INJECTION PUMP 104645-8642
3. NUMBER PLATE
4. _
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY
8. Nozzle and Holder
9. Open Pre:MPa(Kqf/cm2)
10. NOZZLE-HOLDER
11. NOZZLE

Scheme ###:

FUEL-INJECTION PUMP
. [1] 104645-8642 FUEL-INJECTION PUMP
1/6. [1] 146601-0700 PACKING RING
6. [1] 146100-0220 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0320 DRIVE SHAFT
12/1. [1] 146200-0300 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-3520 ROLLER SET
24. [1] 146303-0100 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2120 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-6520 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-2800 COMPRESSION SPRING
34B. [1] 146312-4300 COMPRESSION SPRING
34C. [1] 146312-2700 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0500 GUIDE PIN
50. [1] 146401-0221 HYDRAULIC HEAD
50. [1] 146401-0221 HYDRAULIC HEAD
50. [1] 146401-0221 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET
55. [4] 146430-0320 DELIVERY-VALVE ASSEMBLY VE4
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0320 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146504-1721 GOVERNOR COVER
67/1. [1] 146508-8721 GOVERNOR COVER
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-2800 BLEEDER SCREW
67/23. [1] 146925-7520 BRACKET
67/24. [2] 010206-2240 HEX-SOCKET-HEAD CAP SCREW
67/64. [1] 146935-0720 BRACKET
67/69. [2] 010206-1040 HEX-SOCKET-HEAD CAP SCREW
67/78. [1] 146600-4400 SEAL RING
67/105. [1] 139006-4400 BLEEDER SCREW
67/108. [1] 146931-5220 BRACKET
67/109. [1] 139006-4400 BLEEDER SCREW
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146514-7920 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146830-7120 CONTROL LEVER STAMP 071
72B. [1] 146830-7220 CONTROL LEVER STAMP 072
72C. [1] 146831-9120 CONTROL LEVER STAMP 191
72D. [1] 146831-9220 CONTROL LEVER STAMP 192
73. [1] 014110-6440 LOCKING WASHER D12.2&6.1T1.5
75. [1] 013020-6040 UNION NUT
95. [1] 146851-3520 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1.0
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER
115. [1] 146975-2700 SLIDING SLEEVE
116. [1] 146576-0000 SEALING CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG L5.6
117/1. [1] 146877-4800 PLUG L5.7
117/1. [1] 146877-4900 PLUG L5.8
117/1. [1] 146877-5000 PLUG L5.9
123. [3] 139106-0200 FLAT-HEAD SCREW
124. [1] 010206-4540 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1.0
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE STAMP 02
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-3920 PULLING ELECTROMAGNET
137. [2] 139514-0200 GASKET
145. [1] 146621-4901 UNION NUT
147. [1] 146600-5000 O-RING
200. [1] 146206-0100 COILED SPRING
205. [1] 029470-4030 WOODRUFF KEY
217. [1] 146542-5300 SLOTTED WASHER
218. [1] 146592-2500 COILED SPRING
219. [1] 146541-3000 BUSHING
220. [1] 146592-2600 COILED SPRING
224. [1] 139006-4400 BLEEDER SCREW
230. [1] 146613-2500 BRACKET
231. [1] 139006-4400 BLEEDER SCREW
232. [1] 146931-3200 BRACKET STAMP 132
233. [1] 146658-9020 WIRE
234. [1] 139006-4800 BLEEDER SCREW
235. [1] 146659-0600 CLAMPING BAND
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-1220 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 146621-4901 UNION NUT
244. [1] 146625-0320 BRACKET
245. [3] 139512-0500 GASKET
246. [1] 146125-0700 EYE BOLT
247. [1] 146669-6120 INLET UNION
247. [1] 146669-6120 INLET UNION
248. [1] 146614-0200 SPACER BUSHING
253. [1] 139006-4500 BLEEDER SCREW
275. [1] 146612-4800 BRACKET
276. [2] 010010-1640 BLEEDER SCREW
280. [1] 146361-7020 START ADVANCE ASSY STAMP 119
281. [1] 146600-0800 O-RING
282. [2] 010206-1240 HEX-SOCKET-HEAD CAP SCREW
286. [1] 020106-3540 BLEEDER SCREW
287. [1] 014010-6140 PLAIN WASHER D13&6.5T1.0
288. [1] 146931-6300 BRACKET
310. [1] 146685-7420 POTENTCIOMETER
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146648-2900 JOINT CONNECTION
310/3B. [1] 146648-3000 JOINT CONNECTION
310/3C. [1] 146648-3100 JOINT CONNECTION
310/3D. [1] 146648-3200 JOINT CONNECTION
310/3E. [1] 146648-3300 JOINT CONNECTION
310/3F. [1] 146648-4700 JOINT CONNECTION
310/3G. [1] 146648-5300 JOINT CONNECTION
310/3H. [1] 146649-1700 JOINT CONNECTION
310/4. [1] 146661-0601 BOOT
800S. [1] 146018-8920 PUMP HOUSING
800S/1/6. [1] 146601-0700 PACKING RING
804S. [1] 146232-0320 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
903. [1] 479771-0520 PULSE GENERATOR
906. [1] 146940-4500 NAMEPLATE
910S. [1] 146600-4320 PARTS SET
910S. [1] 146600-4320 PARTS SET
911S. [1] 479771-0520 PULSE GENERATOR
912S. [1] 026508-1140 GASKET D11.4&8.2T1.0
913S. [1] 146422-0000 BLEEDER SCREW
914S. [1] 146699-0020 VALVE SET
914S. [1] 146699-0020 VALVE SET
914S. [1] 146699-0020 VALVE SET
915S. [1] 146658-9020 WIRE
916S. [1] 025804-1610 WOODRUFF KEY
917S. [1] 146685-7410 POTENTCIOMETER

Include in #2:

104745-8644 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09W 0F6 f01g09w0f6
ZEXEL 104745-8644 1047458644
MITSUBISHI MD351410 md351410


Zexel num
Bosch num
Firm num
Name
104745-8644 
F 01G 09W 0F6 
MD351410  MITSUBISHI
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
(Solenoid timer adjustment condition)
With S/T O-ring; S/T ON.   ON
Injection timing adjustment
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   47.9 47.4 48.4
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   600 600 600
Average injection quantity mm3/st.   48 46 50
Oil temperature degC   50 48 52
Injection timing adjustment_03
Pump speed r/min   1250 1250 1250
Average injection quantity mm3/st.   47.9 46.9 48.9
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1750 1750 1750
Average injection quantity mm3/st.   45.2 43.2 47.2
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   2100 2100 2100
Average injection quantity mm3/st.   46.4 44.3 48.5
Oil temperature degC   52 50 54
Injection quantity adjustment
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   19.5 16.5 22.5
Difference in delivery mm3/st.   6
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_02
Pump speed r/min   2550 2550 2550
Average injection quantity mm3/st.   19.5 14.5 24.5
Difference in delivery mm3/st.   6.5
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2900 2900 2900
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Governor adjustment
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   12.5 11 14
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   12.5 10.5 14.5
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_03
Pump speed r/min   750 750 750
Average injection quantity mm3/st.   3
Oil temperature degC   50 48 52
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   75 65 85
Basic   *
Oil temperature degC   48 46 50
Remarks
IDLE  
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   75 65 85
Oil temperature degC   48 46 50
Remarks
IDLE  
Speed control lever angle
Pump speed r/min   375 375 375
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
0000000901
Pump speed r/min   1250 1250 1250
Overflow quantity with S/T ON cm3/min   420 290 550
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1250 1250 1250
Pressure with S/T ON kPa   471 442 500
Pressure with S/T ON kgf/cm2   4.8 4.5 5.1
Pressure with S/T OFF kPa   363 324 402
Pressure with S/T OFF kgf/cm2   3.7 3.3 4.1
Basic   *
Oil temperature degC   50 48 52
Remarks
ON  
Stop lever angle_02
Pump speed r/min   750 750 750
Pressure with S/T ON kPa   353 304 402
Pressure with S/T ON kgf/cm2   3.6 3.1 4.1
Pressure with S/T OFF kPa   255 206 304
Pressure with S/T OFF kgf/cm2   2.6 2.1 3.1
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   1250 1250 1250
Pressure with S/T ON kPa   471 432 510
Pressure with S/T ON kgf/cm2   4.8 4.4 5.2
Pressure with S/T OFF kPa   363 314 412
Pressure with S/T OFF kgf/cm2   3.7 3.2 4.2
Basic   *
Oil temperature degC   50 48 52
Remarks
ON  
Stop lever angle_04
Pump speed r/min   2100 2100 2100
Pressure with S/T ON kPa   667 618 716
Pressure with S/T ON kgf/cm2   6.8 6.3 7.3
Pressure with S/T OFF kPa   559 510 608
Pressure with S/T OFF kgf/cm2   5.7 5.2 6.2
Oil temperature degC   52 50 54
0000001101
Pump speed r/min   1250 1250 1250
Timer stroke with S/T ON mm   4.7 4.5 4.9
Timer stroke with S/T OFF mm   2.6 2.2 3
Basic   *
Oil temperature degC   50 48 52
Remarks
ON  
_02
Pump speed r/min   500 500 500
Timer stroke with S/T ON mm   1.5 0.9 2.1
Oil temperature degC   48 46 50
_03
Pump speed r/min   750 750 750
Timer stroke with S/T ON mm   2.6 2 3.2
Oil temperature degC   50 48 52
_04
Pump speed r/min   1250 1250 1250
Timer stroke with S/T ON mm   4.7 4.3 5.1
Timer stroke with S/T OFF mm   2.6 2 3.2
Basic   *
Oil temperature degC   50 48 52
Remarks
ON  
_05
Pump speed r/min   1750 1750 1750
Timer stroke with S/T ON mm   7 6.4 7.6
Timer stroke with S/T OFF mm   4.9 4.3 5.5
Oil temperature degC   50 48 52
_06
Pump speed r/min   2100 2100 2100
Timer stroke with S/T ON mm   8.6 8 9.2
Oil temperature degC   52 50 54
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.8 5.7 5.9
MS dimension mm   1.2 1.1 1.3
Control lever angle alpha deg.   59 55 63
Control lever angle beta deg.   41 36 46

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104745-8644
C:Position of the control lever N:Pump speed (r/min) V:Output voltage (V) Q:Injection quantity (mm3/st) A:Adjusting point B:Checking point C1:Idling C2:Full speed Vi:Applied voltage input
----------

----------
V1=1.8+-0.03V V2=8.63+-1.1V Vi=10V

0000001901 W-CSD ADJUSTMENT

Test data 104745-8644
Adjustment of the W-CSD 1. Adjustment of the advance angle of the timer (1)Determine the timer advance angle using the graph. (2)(1) Adjust with the screw (A) so that the timer advance angle determined in the item (1) is obtained. Y = timer stroke TA (mm) X = temperature t (deg C) S = Cold advancer N = pump speed A = standard point R = cooling water temperature (degC) decrease direction T = Timer piston stroke (mm) U = Lever angle (deg) W = Lever position (mm)
----------

----------
N1=100r/min T1=1.0+-0.4mm T2=2.4+-0.6mm W1=1.1mm W2=7.4mm a=20degC b=-20degC c=1.3+-2deg d=8.9+-3deg

0000002001 W-FICD LEVER ADJUSTMENT

Test data 104745-8644
2. Adjustment of the W-FICD (1)Insert a block gauge L1 determined from the graph between the control lever (D) and the idle set screw (C). (2)Fix the bolt (F) at the position where the W-FICD lever (E) and the control lever (D) make contact. TT (3)After adjusting the W-FICD lever (E), confirm that the timer stroke is the value s mm adjusted in item 1, and confirm s. Remove the shim after completing adjustment. Y = control lever position dimension L H = control lever position X = temperature
----------
L1=L+-0.05mm T=3.4~4.9N-m(0.35~0.5 kgf-m) s=12.3+-1mm
----------
SW=SW8 T=3.4~4.9N-m(0.35~0.5kgf-m) s=12.3+-1mm




Have questions with 104745-8644?





Group cross 104745-8644 ZEXEL

104745-8640  

104745-8641 
9 460 612 425 
 
INJECTION-PUMP ASSEMBLY
104745-8641  

104745-8642 
9 460 613 256 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

104745-8642  

104745-8643 
9 460 613 230 
MD351410 
INJECTION-PUMP ASSEMBLY
4D56
104745-8643  
9 460 614 981 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

104745-8643  

104745-8644 
9 460 614 981 
MD351410 
INJECTION-PUMP ASSEMBLY
104745-8644  
F 01G 09W 0F6 
MD351410 
INJECTION-PUMP ASSEMBLY
Back to top