104745-2020 ZEXEL 9 460 612 409 BOSCH INJECTION-PUMP ASSEMBLY 9460612409 1047452020 1670088n02


104745-2020 INJECTION-PUMP ASSEMBLY
Rating:
14
Buy INJECTION-PUMP ASSEMBLY 104745-2020 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 612 409 9460612409
ZEXEL 104745-2020 1047452020
NISSAN 1670088N02 1670088n02

Components :

0. INJECTION-PUMP ASSEMBLY 104745-2020
1. _
2. FUEL INJECTION PUMP 104645-2020
3. NUMBER PLATE
4. _ 479774-4020
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105141-2971
8. Nozzle and Holder 16600-1C310
9. Open Pre:MPa(Kqf/cm2) 12.7{130}
10. NOZZLE-HOLDER 105071-1361
11. NOZZLE 105000-2210

Scheme ###:

1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0320 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0020 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-2420 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2420 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-6220 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-3100 COMPRESSION SPRING
34B. [1] 146312-2500 COMPRESSION SPRING
34C. [1] 146312-2300 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-4020 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0600 GUIDE PIN
50. [1] 146403-3620 HYDRAULIC HEAD
50. [1] 146403-3620 HYDRAULIC HEAD
50. [1] 146403-3620 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-4120 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-2720 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146752-3320 MANIFOLD-PRESSURE COMP.
67/1. [1] 146805-7720 GOVERNOR COVER
67/4. [1] 139310-0200 PLAIN WASHER
67/6. [1] 014110-6440 LOCKING WASHER
67/8. [1] 146515-1820 LEVER SHAFT
67/9. [1] 146587-9400 COILED SPRING
67/10. [1] 146600-0200 O-RING
67/11. [1] 146602-0100 PLAIN WASHER D14&10.1T1.50
67/12. [1] 146540-3220 CONTROL LEVER
67/12B. [1] 146540-3320 CONTROL LEVER
67/13. [1] 013020-6040 UNION NUT M6P1H5
67/14. [1] 146621-1700 UNION NUT
67/15. [1] 146526-3400 BLEEDER SCREW
67/16. [1] 146526-3000 BLEEDER SCREW
67/23. [1] 146930-3800 BRACKET
67/24. [2] 139006-4600 BLEEDER SCREW
67/25. [1] 013020-6040 UNION NUT M6P1H5
67/26. [1] 146930-3920 BRACKET
67/31. [1] 146710-0800 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-0700 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-0100 BUSHING
67/38. [1] 139506-0200 GASKET D8.9&6.8T1.00
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET D15.4&12.2T1.50
67/41. [1] 146713-4100 ADJUSTING PIN
67/42. [2] 146714-0000 PLATE
67/43. [1] 146715-0000 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT M6P1H3.6
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-0400 COILED SPRING
67/48/1. [1] 146720-0000 SPACER BUSHING L3.7
67/48/1. [1] 146720-0100 SPACER BUSHING L3.9
67/48/1. [1] 146720-0200 SPACER BUSHING L4.1
67/48/1. [1] 146720-0300 SPACER BUSHING L4.3
67/48/1. [1] 146720-0400 SPACER BUSHING L4.5
67/48/1. [1] 146720-0500 SPACER BUSHING L4.7
67/48/1. [1] 146720-0600 SPACER BUSHING L4.9
67/48/1. [1] 146720-0700 SPACER BUSHING L5.1
67/48/1. [1] 146720-0800 SPACER BUSHING L5.3
67/48/1. [1] 146720-0900 SPACER BUSHING L2.7
67/48/1. [1] 146720-1000 SPACER BUSHING L2.9
67/48/1. [1] 146720-1100 SPACER BUSHING L3.1
67/48/1. [1] 146720-1200 SPACER BUSHING L3.3
67/48/1. [1] 146720-1300 SPACER BUSHING L3.5
67/48/1. [1] 146720-1400 SPACER BUSHING L2.8
67/48/1. [1] 146720-1500 SPACER BUSHING L3.0
67/48/1. [1] 146720-1600 SPACER BUSHING L3.2
67/48/1. [1] 146720-1700 SPACER BUSHING L3.4
67/48/1. [1] 146720-1800 SPACER BUSHING L3.6
67/48/1. [1] 146720-1900 SPACER BUSHING L3.8
67/48/1. [1] 146720-2000 SPACER BUSHING L4.0
67/48/1. [1] 146720-2100 SPACER BUSHING L4.2
67/48/1. [1] 146720-2200 SPACER BUSHING L4.4
67/48/1. [1] 146720-2300 SPACER BUSHING L4.6
67/48/1. [1] 146720-2400 SPACER BUSHING L4.8
67/48/1. [1] 146720-2500 SPACER BUSHING L5.0
67/48/1. [1] 146720-2600 SPACER BUSHING L5.2
67/48/1. [1] 146720-2700 SPACER BUSHING L5.4
67/48/1. [1] 146720-2800 SPACER BUSHING L5.5
67/48/1. [1] 146720-2900 SPACER BUSHING L5.6
67/48/1. [1] 146720-4500 SPACER BUSHING L1.8
67/48/1. [1] 146720-4600 SPACER BUSHING L1.9
67/48/1. [1] 146720-4700 SPACER BUSHING L2.0
67/48/1. [1] 146720-4800 SPACER BUSHING L2.1
67/48/1. [1] 146720-4900 SPACER BUSHING L2.2
67/48/1. [1] 146720-5000 SPACER BUSHING L2.3
67/48/1. [1] 146720-5100 SPACER BUSHING L2.4
67/48/1. [1] 146720-5200 SPACER BUSHING L2.5
67/48/1. [1] 146720-5300 SPACER BUSHING L2.6
67/48/1. [1] 146725-2500 SPACER BUSHING L5.7
67/48/1. [1] 146725-2600 SPACER BUSHING L5.8
67/48/1. [1] 146725-2700 SPACER BUSHING L5.9
67/48/1. [1] 146725-2800 SPACER BUSHING L6.0
67/48/1. [1] 146725-2900 SPACER BUSHING L6.1
67/48/1. [1] 146725-3000 SPACER BUSHING L6.2
67/48/1. [1] 146725-3100 SPACER BUSHING L6.3
67/48/1. [1] 146725-3200 SPACER BUSHING L6.4
67/48/1. [1] 146725-3300 SPACER BUSHING L6.5
67/48/1. [1] 146725-3400 SPACER BUSHING L6.6
67/48/1. [1] 146725-3500 SPACER BUSHING L6.7
67/48/1. [1] 146725-3600 SPACER BUSHING L6.8
67/48/1. [1] 146725-3700 SPACER BUSHING L6.9
67/48/1. [1] 146725-3800 SPACER BUSHING L7.0
67/48/1. [1] 146725-3900 SPACER BUSHING L7.1
67/48/1. [1] 146725-4000 SPACER BUSHING L7.2
67/48/1. [1] 146725-4100 SPACER BUSHING L7.3
67/48/1. [1] 146725-4200 SPACER BUSHING L7.4
67/48/1. [1] 146725-4300 SPACER BUSHING L7.5
67/49. [1] 146721-2920 COVER
67/54. [4] 139006-4600 BLEEDER SCREW
67/54. [4] 139006-4600 BLEEDER SCREW
67/56. [1] 146723-0300 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET D9.9&6.2T1
67/60. [1] 146724-0300 ELEMENT
67/61. [1] 146724-0600 CAPSULE
67/78. [1] 146600-4400 SEAL RING
67/112. [1] 146629-3320 BRACKET
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146514-4820 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146830-4720 CONTROL LEVER
72B. [1] 146830-4820 CONTROL LEVER
73. [1] 014110-6440 LOCKING WASHER
75. [1] 013020-6040 UNION NUT M6P1H5
95. [1] 146565-9220 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0100 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER D17&6.4T1.60
115. [1] 146975-4200 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146650-7120 PULLING ELECTROMAGNET
136B. [1] 146650-7020 PULLING ELECTROMAGNET
136C. [1] 146650-7220 PULLING ELECTROMAGNET
137. [2] 139514-0200 GASKET
145. [1] 146621-1000 UNION NUT
147. [1] 146600-5000 O-RING
162. [1] 020146-1270 BLEEDER SCREW
200. [1] 146206-0100 COILED SPRING
214. [1] 146542-5000 BUSHING
216. [1] 146542-5100 BUSHING
217. [1] 146541-2900 SLOTTED WASHER
218. [1] 146592-5500 COILED SPRING
219. [1] 146541-3000 BUSHING
220. [1] 146592-2800 COILED SPRING
230. [1] 146930-4020 BRACKET
231. [1] 139006-4600 BLEEDER SCREW
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-0720 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 146621-1000 UNION NUT
245. [3] 139512-0200 GASKET D18.5&12.2T1.00
246. [1] 139812-0500 EYE BOLT
247. [1] 146666-0221 PIPE
247. [1] 146666-0221 PIPE
248. [1] 146614-0200 SPACER BUSHING
275. [1] 146612-2120 BRACKET
276. [2] 010010-1640 BLEEDER SCREW M10P1.5L16 4T
280. [1] 146360-9520 START ADVANCE ASSY
281. [1] 146600-0800 O-RING
282. [2] 010206-1240 HEX-SOCKET-HEAD CAP SCREW M6P1L12
287. [1] 020146-1440 BLEEDER SCREW M6P1L14
309. [1] 020146-1270 BLEEDER SCREW
310. [1] 146683-8120 POTENTCIOMETER
310/2. [1] 146930-4100 BRACKET
310/3. [2] 139104-0400 FLAT-HEAD SCREW
310/4. [1] 146661-0601 BOOT
310/5. [1] 146649-0400 JOINT CONNECTION
310/5B. [1] 146649-0500 JOINT CONNECTION
310/5C. [1] 146649-0600 JOINT CONNECTION
310/5D. [1] 146649-0700 JOINT CONNECTION
310/5E. [1] 146649-0800 JOINT CONNECTION L21
310/5F. [1] 146649-0900 JOINT CONNECTION L18
310/5G. [1] 146649-1000 JOINT CONNECTION L27
310/5H. [1] 146649-1100 JOINT CONNECTION L24
310/5I. [1] 146649-1200 JOINT CONNECTION
310/5J. [1] 146649-1300 JOINT CONNECTION
310/5K. [1] 146649-1400 JOINT CONNECTION
310/5L. [1] 146649-1500 JOINT CONNECTION
800S. [1] 146009-3120 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0920 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
821S. [1] 146210-5720 ROLLER SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
847S. [1] 146683-8110 POTENTCIOMETER
903. [1] 479774-4020 PULSE GENERATOR
903/6. [1] 479773-6500 O-RING
906. [1] 146981-1500 NAMEPLATE

Include in #2:

104745-2020 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 612 409 9460612409
ZEXEL 104745-2020 1047452020
NISSAN 1670088N02 1670088n02


Zexel num
Bosch num
Firm num
Name
104745-2020 
9 460 612 409 
1670088N02  NISSAN
INJECTION-PUMP ASSEMBLY
CD20-T K 11CJ INJECTION PUMP ASSY VE4 VE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Left
  L
(Solenoid timer adjustment condition)
With S/T O-ring; S/T OFF.
  OFF
Injection timing adjustment
Pump speed r/min   1000 1000 1000
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   32.7 32.3 33.1
Difference in delivery mm3/st.   3
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
Injection timing adjustment_02
Pump speed r/min   1000 1000 1000
Boost pressure kPa   49.3 48 50.6
Boost pressure mmHg   370 360 380
Average injection quantity mm3/st.   45.3 44.9 45.7
Difference in delivery mm3/st.   3
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_03
Pump speed r/min   600 600 600
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   33.5 31.5 35.5
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1000 1000 1000
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   32.7 31.7 33.7
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Remarks
Full
 
Injection timing adjustment_05
Pump speed r/min   1000 1000 1000
Boost pressure kPa   49.3 48 50.6
Boost pressure mmHg   370 360 380
Average injection quantity mm3/st.   45.3 44.3 46.3
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Remarks
CBS
 
Injection timing adjustment_06
Pump speed r/min   1200 1200 1200
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   47.5 44 51
Oil temperature degC   50 48 52
Injection timing adjustment_07
Pump speed r/min   1800 1800 1800
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   49.8 47.3 52.3
Oil temperature degC   50 48 52
Injection timing adjustment_08
Pump speed r/min   2200 2200 2200
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   45.8 42.8 48.8
Oil temperature degC   52 50 54
Injection timing adjustment_09
Pump speed r/min   2400 2400 2400
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   43.4 39.9 46.9
Oil temperature degC   52 50 54
Injection quantity adjustment
Pump speed r/min   2550 2550 2550
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   37.5 36.5 38.5
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_02
Pump speed r/min   2550 2550 2550
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   37.5 35 40
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2700 2700 2700
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   24.4 16.9 31.9
Difference in delivery mm3/st.   5.5
Oil temperature degC   55 52 58
Injection quantity adjustment_04
Pump speed r/min   2950 2950 2950
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   7.5
Oil temperature degC   55 52 58
Governor adjustment
Pump speed r/min   400 400 400
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   10.5 9.5 11.5
Difference in delivery mm3/st.   0.9
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   400 400 400
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   10.5 8.5 12.5
Difference in delivery mm3/st.   1.6
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_03
Pump speed r/min   600 600 600
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   5
Oil temperature degC   50 48 52
Timer adjustment
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   65 60 70
Basic   *
Oil temperature degC   48 46 50
Remarks
IDLE
 
Timer adjustment_02
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   65 60 70
Oil temperature degC   48 46 50
Remarks
IDLE
 
Speed control lever angle
Pump speed r/min   400 400 400
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1000 1000 1000
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Overflow quantity with S/T OFF cm3/min   390 260 520
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1000 1000 1000
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Pressure with S/T ON kPa   353 324 382
Pressure with S/T ON kgf/cm2   3.6 3.3 3.9
Pressure with S/T OFF kPa   402 373 431
Pressure with S/T OFF kgf/cm2   4.1 3.8 4.4
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
Stop lever angle_02
Pump speed r/min   600 600 600
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Pressure with S/T OFF kPa   314 275 353
Pressure with S/T OFF kgf/cm2   3.2 2.8 3.6
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   1000 1000 1000
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Pressure with S/T ON kPa   353 314 392
Pressure with S/T ON kgf/cm2   3.6 3.2 4
Pressure with S/T OFF kPa   402 373 431
Pressure with S/T OFF kgf/cm2   4.1 3.8 4.4
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
Stop lever angle_04
Pump speed r/min   1400 1400 1400
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Pressure with S/T OFF kPa   481 442 520
Pressure with S/T OFF kgf/cm2   4.9 4.5 5.3
Oil temperature degC   50 48 52
Stop lever angle_05
Pump speed r/min   2200 2200 2200
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Pressure with S/T OFF kPa   647 598 696
Pressure with S/T OFF kgf/cm2   6.6 6.1 7.1
Oil temperature degC   52 50 54
0000001101
Pump speed r/min   1000 1000 1000
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T ON mm   1.6 1.1 2.1
Timer stroke with S/T OFF mm   2.8 2.6 3
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_02
Pump speed r/min   600 600 600
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T OFF mm   0.9
Oil temperature degC   50 48 52
_03
Pump speed r/min   1000 1000 1000
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T ON mm   1.6 1 2.2
Timer stroke with S/T OFF mm   2.8 2.5 3.1
Basic   *
Oil temperature degC   50 48 52
Remarks
OFF
 
_04
Pump speed r/min   1400 1400 1400
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T OFF mm   5.1 4.7 5.5
Oil temperature degC   50 48 52
_05
Pump speed r/min   2200 2200 2200
Boost pressure kPa   66.7 65.4 68
Boost pressure mmHg   500 490 510
Timer stroke with S/T OFF mm   7.4 6.9 7.8
Oil temperature degC   52 50 54
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   6.29 6.19 6.39
MS dimension mm   0.9 0.8 1
BCS stroke mm   4.2 4.1 4.3
Control lever angle alpha deg.   25 21 29
Control lever angle beta deg.   42 37 47

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104745-2020
Potentiometer adjustment (dummy bolt type) 1. Determine the position of the control lever at the adjusting point. Fix with the dummy bolt contacting the lever. 2. In the fixed position, install the potentiometer so that the output voltage is V1 (supply voltage Vi). 3. After completing potentiometer installation, remove the dummy bolt. N:Pump speed Q:Injection quantity V:Output voltage P:Boost pressure A:Adjusting point B:Standard point B': Check point C:Control lever angle D:Idling lever position E:Full speed lever position F:Conversion point G:From idle H:ON-->OFF I:OFF-->ON J:Connecting diagram for the potentiometer K:Output O:Output when (2) and (3) connected. P:When (4) or (6) connected: switch OFF to ON. Q:When (4) or (5) connected: switch ON to OFF.
----------
V1=2.83+-0.03V Vi=10V
----------
N1=700(r/min) Q1=18.7+-1.0(mm3/st) V1=2.83+-0.03(V) V2=(1.10+-0.4(V)) V3=(8.10+-1.47(V)) C1=Measure C2=0(deg) C3=42+-5(deg) Vi=10(V) P1=0(kPa) P2=0(mmHg) C4=7+-3(deg)?@ C5=23.5++(deg) G1=- G2=-

0000001901 STARTING I/Q ADJUSTMENT

Test data 104745-2020
Starting injection quantity adjustment Adjust adjusting bolt so that the starting injection quantity is within the standard. Fix using nut. (A): Lock nut. (B): Stopping lever (C): Adjustment bolt
----------

----------
L=5.9~8.2(mm)

0000002001 W-CSD ADJUSTMENT

Test data 104745-2020
Adjustment of the W-CSD 1. Set the intermediate lever position. (1)Insert a block gauge L = 1+-0.05 mm between the idling set screw (H) and the control lever (G). (2)Insert a shim with a thickness of S+-0.05 (mm) between the intermediate lever (D) and the intermediate lever bracket (E). (3)Make the control lever (G) contact the screw (F) and fix the nut. 2. W-CSD lever adjustment (1)After completing 1 above, remove the block gauge L1 and the shim S. (2)Insert a block gauge L2 determined from the graph (L-t) between the idling set screw (H) and the control lever (G). (3)Adjust using screw (B) until screw (F) contacts the control lever (G). The, fix using the (A). (4)The temperature of the wax at adjustment must not exceed a. K:Graph L-t: t (deg C) <= 10 L = 6.0 10<= t (deg C) <= 30 L = -0.14t+7.4 30 <=t (deg C) <= 54.3 L=-0.132t+7.17 X:Temperature t Y:Control lever L dimension (control lever position)
----------
a=30(degC) L1=4.6(mm) L2=L+-0.05(mm) S=5.3(mm)
----------
S=5.3(mm) L2=L+-0.05(mm)




Have questions with 104745-2020?





Group cross 104745-2020 ZEXEL

Nissan 

9 460 612 408 
1670098N61 
INJECTION-PUMP ASSEMBLY
CD20-T
9 460 613 164 
1670095N61 
INJECTION-PUMP ASSEMBLY
CD20-T
104745-2020  
9 460 612 409 
1670088N02 
INJECTION-PUMP ASSEMBLY
CD20-T

Nitco(Misa) 

9 460 613 296 
16700G2403 
INJECTION-PUMP ASSEMBLY
TD27-T
9 460 613 446 
16700G2460 
INJECTION-PUMP ASSEMBLY
TD27-T

Nissan 

9 460 613 485 
16700G2404 
INJECTION-PUMP ASSEMBLY

Nitco(Misa) 

9 460 614 509 
16700G2404 
INJECTION-PUMP ASSEMBLY
TD27-T
Back to top