104745-0220 ZEXEL F 01G 09W 0E5 BOSCH INJECTION-PUMP ASSEMBLY f01g09w0e5 1047450220 wlvx13800

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104745-0220 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH F 01G 09W 0E5 f01g09w0e5

ZEXEL 104745-0220 1047450220

MAZDA WLVX13800 wlvx13800

Components :

0.	INJECTION-PUMP ASSEMBLY	104745-0220
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE	146996-8800
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE	146679-4120
7.	NOZZLE AND HOLDER ASSY
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)
10.	NOZZLE-HOLDER
11.	NOZZLE

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0720	SUPPLY PUMP
9.	[1]	146103-0100	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0420	DRIVE SHAFT
12/1.	[1]	146200-0400	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-5320	ROLLER SET
24.	[1]	146303-0100	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0200	SLOTTED WASHER
29.	[1]	146220-4720	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146311-8420	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
34.	[1]	146312-2900	COMPRESSION SPRING
34B.	[1]	146312-2800	COMPRESSION SPRING
34C.	[1]	146312-3000	COMPRESSION SPRING
35/1.	[1]	146690-3200	SHIM D11.5&9.4T0.1
35/1.	[1]	146690-3300	SHIM D11.5&9.4T0.2
35/1.	[1]	146690-3400	SHIM D11.5&9.4T0.25
35/1.	[1]	146690-3500	SHIM D11.5&9.4T1.0
35/1.	[1]	146690-4100	SHIM D11.5&9.4T2
35/1.	[1]	146690-4200	SHIM D11.5&9.4T0.5
35/1.	[1]	146690-4300	SHIM D11.5&9.4T0.75
36.	[1]	146600-0800	O-RING
37.	[1]	146310-4020	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-0100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
41.	[1]	146312-3300	COMPRESSION SPRING
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
49.	[2]	146234-0600	GUIDE PIN
50.	[1]	146403-6820	HYDRAULIC HEAD
50.	[1]	146403-6820	HYDRAULIC HEAD
50.	[1]	146403-6820	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
54.	[4]	146433-0100	GASKET
55.	[4]	146430-7420	DELIVERY-VALVE ASSEMBLY VE74
56.	[4]	146432-0000	COMPRESSION SPRING
58.	[4]	146440-0220	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146707-3720	ANEROID CAPSULE
67/1.	[1]	146806-8620	GOVERNOR COVER
67/14.	[1]	146621-1700	UNION NUT
67/16.	[1]	146526-3000	BLEEDER SCREW
67/23.	[1]	146936-6100	BRACKET
67/24.	[2]	020306-1640	BLEEDER SCREW
67/31.	[1]	146710-0400	BUSHING
67/32.	[1]	146602-1800	PLAIN WASHER
67/33.	[1]	146716-0200	UNION NUT
67/34.	[1]	146713-1000	BEARING PIN
67/35.	[1]	146621-0300	UNION NUT
67/36.	[1]	146600-1400	O-RING
67/37.	[1]	146710-0100	BUSHING
67/38.	[1]	139506-0200	GASKET
67/39.	[1]	146620-0300	CAPSULE
67/40.	[1]	026512-1540	GASKET
67/41.	[1]	146713-3700	ADJUSTING PIN
67/47.	[1]	146717-0800	COILED SPRING
67/49.	[1]	146721-0700	COVER
67/54.	[2]	139006-4500	BLEEDER SCREW
67/55.	[2]	139006-4600	BLEEDER SCREW
67/56.	[1]	146723-0200	CONTROL LEVER
67/57.	[1]	146712-0100	BEARING PIN
67/58.	[2]	146620-0600	CAPSULE
67/59.	[2]	026506-1040	GASKET
67/60.	[1]	146724-0300	ELEMENT
67/61.	[1]	146724-0400	CAPSULE
67/64.	[1]	146936-6600	BRACKET
67/68.	[1]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
67/70.	[1]	016520-6010	O-RING
67/71.	[1]	146714-0100	SLOTTED WASHER
67/72.	[1]	016010-0920	LOCKING WASHER
67/73.	[1]	146715-0120	BELLOWS
67/74/1.	[0]	146603-3700	SHIM T0.20
67/74/1.	[0]	146603-3800	SHIM T0.30
67/74/1.	[0]	146603-3900	SHIM T0.50
67/74/1.	[0]	146603-4000	SHIM T0.70
67/74/1.	[0]	146603-4100	SHIM T1.00
67/74/1.	[0]	146603-4200	SHIM T1.50
67/78.	[1]	146600-4400	SEAL RING
67/100.	[1]	146936-5900	BRACKET
67/102.	[1]	146936-5700	BRACKET
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-4100	THREADED PIN
67/201B.	[1]	146545-4200	THREADED PIN
67/201C.	[1]	146545-4300	THREADED PIN
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146811-2020	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146831-4320	CONTROL LEVER
72B.	[1]	146831-4420	CONTROL LEVER
72C.	[1]	146831-7720	CONTROL LEVER
72D.	[1]	146831-7820	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
75.	[1]	146621-0700	UNION NUT
95.	[1]	146865-6720	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1.0
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0420	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146976-0000	SLIDING SLEEVE
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-2300	PLUG L3.10
117/1.	[1]	146577-2400	PLUG L3.30
117/1.	[1]	146577-2500	PLUG L3.50
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-7200	PLUG L3.2
117/1.	[1]	146577-7300	PLUG L3.4
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
123.	[4]	146620-0500	HEX-SOCKET-HEAD CAP SCREW
130.	[1]	146421-0020	CAPSULE
130/2.	[1]	026508-1140	GASKET D11.4&8.2T1.0
130/3.	[1]	146422-0000	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0920	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146650-6020	PULLING ELECTROMAGNET STAMP 60
137.	[2]	139514-0200	GASKET
145.	[1]	146621-4901	UNION NUT
147.	[1]	146600-5000	O-RING
162.	[1]	146625-8020	PLATE
200.	[1]	146206-0100	COILED SPRING
205.	[1]	146201-0100	WOODRUFF KEY
214.	[1]	146542-7500	BUSHING
217.	[1]	146542-2600	SLOTTED WASHER
218.	[1]	146592-9800	COILED SPRING
219.	[1]	146541-3000	BUSHING
220.	[1]	146592-9700	COILED SPRING
221.	[1]	146936-5820	BRACKET
222.	[1]	010206-1440	HEX-SOCKET-HEAD CAP SCREW
223.	[1]	146670-9620	SWITCH
236.	[3]	139006-4800	BLEEDER SCREW
236.	[3]	139006-4800	BLEEDER SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146688-0920	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	407911-1410	CONTROL UNIT
243.	[1]	146621-4901	UNION NUT
244.	[1]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
245.	[3]	139512-0500	GASKET
246.	[1]	146125-0700	EYE BOLT
247.	[1]	146677-3920	INLET UNION
247.	[1]	146677-3920	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
251.	[1]	146125-0101	FILTER
252.	[1]	146125-0200	COILED SPRING
275.	[1]	146932-8000	BRACKET
276.	[2]	010010-1640	BLEEDER SCREW
277.	[1]	146612-8000	BRACKET
310.	[1]	146685-8620	POTENTCIOMETER
310/2.	[2]	139104-0400	FLAT-HEAD SCREW
310/3.	[1]	146620-2900	FLAT-HEAD SCREW
310/4.	[1]	146621-0500	UNION NUT
310/5.	[1]	146614-2300	JOINT CONNECTION
310/6.	[1]	146661-0401	BOOT
317.	[2]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
318.	[1]	146935-8220	BRACKET
360.	[1]	146663-1700	BUSHING
361.	[1]	146649-8900	CAP
362.	[2]	146620-8403	BLEEDER SCREW
370.	[1]	146663-2720	SPACER RING
800S.	[1]	146018-7820	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-1520	COMPRESSION SPRING
805S.	[1]	146574-0720	PARTS SET
810S.	[1]	146600-2420	REPAIR SET
812S.	[1]	146600-1920	PARTS SET
821S.	[1]	146210-5820	ROLLER SET
835S.	[1]	146598-1000	CAP
836S/1.	[1]	146598-0600	CAP L18
836S/1.	[1]	146598-0700	CAP L21
836S/1.	[1]	146598-0800	CAP L24
836S/1.	[1]	146598-0900	CAP L27
847S.	[1]	146685-8810	POTENTCIOMETER
905.	[1]	146679-4120	ACTUATOR
906.	[1]	146996-8800	NAMEPLATE
912.	[2]	010206-1440	HEX-SOCKET-HEAD CAP SCREW

Include in #2:

104745-0220 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH F 01G 09W 0E5 f01g09w0e5

ZEXEL 104745-0220 1047450220

MAZDA WLVX13800 wlvx13800

Zexel num

Bosch num

Firm num

Name

104745-0220
104745-0221

F 01G 09W 0E5

WLVX13800 MAZDA

INJECTION-PUMP ASSEMBLY
WL-NA * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Left L

(Solenoid timer adjustment condition)
With S/T O-ring; S/T ON. ON

Injection timing adjustment

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 45.4 44.9 45.9

Difference in delivery mm3/st. 4

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 40.4 37.4 43.4

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 45.4 44.4 46.4

Difference in delivery mm3/st. 4.5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 40 36.5 43.5

Oil temperature degC 52 50 54

Injection quantity adjustment

Pump speed r/min 2450 2450 2450

Average injection quantity mm3/st. 15.7 12.7 18.7

Difference in delivery mm3/st. 5

Basic *

Oil temperature degC 55 52 58

Injection quantity adjustment_02

Pump speed r/min 2450 2450 2450

Average injection quantity mm3/st. 15.7 5.7 25.7

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 55 52 58

Injection quantity adjustment_03

Pump speed r/min 2700 2700 2700

Average injection quantity mm3/st. 8

Oil temperature degC 55 52 58

Governor adjustment

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 9 8 10

Difference in delivery mm3/st. 1.7

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 9 7.5 10.5

Difference in delivery mm3/st. 2.2

Basic *

Oil temperature degC 48 46 50

Boost compensator adjustment

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 17 15 19

Difference in delivery mm3/st. 3 3 3

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 70 55 90

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 70 50 90

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 360 360 360

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1250 1250 1250

Overflow quantity with S/T ON cm3/min 420 290 550

Overflow quantity with S/T OFF cm3/min 460 330 590

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1250 1250 1250

Pressure with S/T ON kPa 569 530 608

Pressure with S/T ON kgf/cm2 5.8 5.4 6.2

Pressure with S/T OFF kPa 471 442 500

Pressure with S/T OFF kgf/cm2 4.8 4.5 5.1

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

Stop lever angle_02

Pump speed r/min 1250 1250 1250

Pressure with S/T OFF kPa 471 432 510

Pressure with S/T OFF kgf/cm2 4.8 4.4 5.2

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

0000001101

Pump speed r/min 1250 1250 1250

Timer stroke with S/T ON mm 5.7 5.3 6.1

Timer stroke with S/T OFF mm 4.1 3.9 4.3

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

_02

Pump speed r/min 500 500 500

Timer stroke with S/T ON mm 1.8 0.8 2.8

Oil temperature degC 48 46 50

_03

Pump speed r/min 1250 1250 1250

Timer stroke with S/T ON mm 5.7 5.1 6.3

Timer stroke with S/T OFF mm 4.1 3.7 4.5

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

_04

Pump speed r/min 2000 2000 2000

Timer stroke with S/T ON mm 9.2 8.2 10

Timer stroke with S/T OFF mm 7.6 7 8.2

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 35.6 35.1 36.1

Timer stroke TA mm 3.8 3.8 3.8

Timer stroke variation dT mm 0.3 0.1 0.5

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

_02

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 35.6 34.6 36.6

Timer stroke variation dT mm 0.3 -0.1 0.7

Basic *

Oil temperature degC 50 48 52

Remarks
OFF

_03

Pump speed r/min 1250 1250 1250

Average injection quantity mm3/st. 22.1 20.6 23.6

Timer stroke variation dT mm 1 0.4 1.6

Oil temperature degC 50 48 52

0000001501

Pump speed r/min 1250 1250 1250

Height m 1460 1460 1460

Atmospheric pressure difference kPa -16.7 -18 -15.4

Atmospheric pressure difference mmHg -125 -135 -115

Average injection quantity mm3/st. 42.4 41.9 42.9

Decrease qty mm3/st. 3 3 3

Decrease rate % 7 7 7

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1250 1250 1250

Atmospheric pressure difference kPa -5.9 -7.2 -4.6

Atmospheric pressure difference mmHg -44 -69 -19

Average injection quantity mm3/st. 45.4 41.9 46.4

Decrease rate % 0 0 0

Oil temperature degC 50 48 52

_03

Pump speed r/min 1250 1250 1250

Atmospheric pressure difference kPa -16.7 -18 -15.4

Atmospheric pressure difference mmHg -125 -135 -115

Average injection quantity mm3/st. 42.4 41.4 43.4

Decrease rate % 7 7 7

Basic *

Oil temperature degC 50 48 52

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 6.01 5.91 6.11

MS dimension mm 1 0.9 1.1

Pre-stroke mm 0.03 0.01 0.05

Control lever angle alpha deg. 12.5 8.5 16.5

Control lever angle beta deg. 40 37 43

Test data Ex:

0000001801 CONTROL STANDARD AT IDLING

Standards for idle difference in delivery control After idle adjustment, measure the idle injection quantities of (A) to (D). Install the colored rings to the delivery valve holders (A) to (D) in accordance with the table. (A): A cylinder (B) :B cylinder (C) : C cylinder (D): D cylinder (E): Collar ring (F): (A) >= (C) (G): (C) > (A) (H): (A) - (C) or (C) - (A) (I): 0.2, 0.1(mm3/st) (J): (B) - (D) or (D) - (B) (K): Ring color (L): At least 0.6 mm3/st (M): 0.3, 0.4, 0.5 (mm3/st) (N): 0.2, 0.1, 0.0 (mm3/st) (O): (B) >= (D) (P): (D) > (B) (T): Yellow (U): White (V): Red
----------

----------

0000001901 POTENTIOMETER ADJUSTMENT

Adjustment of the potentiometer Dummy bolt method 1. Hold the dummy bolt against the control lever at position Np = N1 (r/min) and Q = Q1 (mm3/st) and fix using the lock nut. 2. When adjusting the potentiometer, position the control lever against the dummy bolt and adjust so that the output voltage is V1 (V). 3. After adjustment, remove the dummy bolt and confirm that the potentiometer output voltage at the control lever's idling and full speed positions is as specified above. Vi:Applied voltage N:Pump speed (r/min) V:Output voltage (V) Q:Injection quantity (mm3/st) A:Adjusting point B:Checking point C:Position of the control lever C1:Idling C2:Full speed P1:Boost pressure (kPa) P2:Boost pressure (mmHg)
----------
N1=1500r/min Q1=15.2+-1.0mm3/st V1=4.97+-0.03V Vi=10V
----------
N1=1500r/min Q1=15.2+-1.0mm3/st V1=4.97+-0.03V V2=1.73+-0.70V V3=8.40+-0.53V a=18deg b=0deg c=40deg Vi=10V

0000002001 WIRE

(1)Wire length confirmation Accelerator wire (idle ~ full stroke: L1) (2)Idle switch confirmation Confirm that the switch is ON at the control lever's idle position. (3)Adjustment of the two stage actuator 1. Apply negative pressure P1 {P2} to the actuator negative pressure suction port. 2. Under the conditions in 1, adjust using the screw (C) so that the position of the control lever (B) position is a [clearance L2 from the idle switch (E)] and fix using the locknut (D). (Tightening torque T) 3. At idle switch (E) locknut tightening torque T2, gap should be a minimum of L3.
----------
L1=34.2+-3.5mm L2=4.6+-0.5mm L3=2.5mm P1=-66.6kPa P2=-500mmHg a=7.6deg Alpha=12.5+-4deg T1=6~9Nm(0.6~0.9kgfm) T2=12~15Nm(1.2~1.5kgfm)
----------
L2=4.6+-0.5mm L3=2.5mm a=7.6deg Alpha=12.5+-4deg