Rating:
Information injection-pump assembly
BOSCH
F 01G 09W 0EP
f01g09w0ep
ZEXEL
104742-7591
1047427591
KOMATSU
6274711120
6274711120
Components :
0. | INJECTION-PUMP ASSEMBLY | 104742-7591 |
1. | _ | |
2. | FUEL INJECTION PUMP | |
3. | NUMBER PLATE | |
4. | _ | |
5. | CAPSULE | 146620-0120 |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105119-4270 |
8. | Nozzle and Holder | |
9. | Open Pre:MPa(Kqf/cm2) | 19.6(200) |
10. | NOZZLE-HOLDER | 105048-4450 |
11. | NOZZLE | 105017-9460 |
Scheme ###:
1/6. | [1] | 146601-1100 | PACKING RING |
6. | [1] | 146100-0120 | SUPPLY PUMP |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0820 | DRIVE SHAFT |
12/1. | [1] | 146200-0800 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-9320 | ROLLER SET |
24. | [1] | 146303-0400 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0301 | SLOTTED WASHER |
29. | [1] | 146220-3620 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-4000 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM |
34. | [1] | 146302-3800 | COMPRESSION SPRING |
35/1. | [0] | 146603-0700 | SHIM D17.5&7.5T0.60 |
35/1. | [0] | 146603-0800 | SHIM D17.5&7.5T0.70 |
35/1. | [0] | 146603-0900 | SHIM D17.5&7.5T0.90 |
35/1. | [0] | 146603-1000 | SHIM D17.5&7.5T1.00 |
35/1. | [0] | 146603-1100 | SHIM D17.5&7.5T1.20 |
35/1. | [0] | 146603-3600 | SHIM D17.5&7.5T2.40 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0700 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-5100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM D17&5.2T2.1 |
48/1. | [1] | 146690-5900 | SHIM D17&5.2T2.2 |
48/1. | [1] | 146690-6000 | SHIM D17&5.2T2.3 |
48/1. | [1] | 146690-6100 | SHIM D17&5.2T2.4 |
48/1. | [1] | 146690-6200 | SHIM D17&5.2T2.5 |
48/1. | [1] | 146690-6300 | SHIM D17&5.2T2.6 |
48/1. | [1] | 146690-6400 | SHIM D17&5.2T2.7 |
48/1. | [1] | 146690-6500 | SHIM D17&5.2T2.8 |
48/1. | [1] | 146690-6600 | SHIM D17&5.2T2.9 |
48/1. | [1] | 146690-6700 | SHIM D17&5.2T3.0 |
48/1. | [1] | 146690-6800 | SHIM D17&5.2T3.1 |
48/1. | [1] | 146690-6900 | SHIM D17&5.2T3.2 |
48/1. | [1] | 146690-7000 | SHIM D17&5.2T3.3 |
48/1. | [1] | 146690-7100 | SHIM D17&5.2T3.4 |
48/1. | [1] | 146690-7200 | SHIM D17&5.2T0.4 |
48/1. | [1] | 146690-7300 | SHIM D17&5.2T0.6 |
48/1. | [1] | 146690-7400 | SHIM D17&5.2T0.7 |
48/1. | [1] | 146690-7500 | SHIM D17&5.2T1.9 |
48/1. | [1] | 146690-7800 | SHIM D17&5.2T0.2 |
49. | [2] | 146234-0600 | GUIDE PIN |
50. | [1] | 146402-5720 | HYDRAULIC HEAD |
50. | [1] | 146402-5720 | HYDRAULIC HEAD |
50. | [1] | 146402-5720 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [4] | 146433-0100 | GASKET |
58. | [4] | 149300-0521 | PRESSURE-CONTROL VALVE |
60. | [3] | 139106-0100 | FLAT-HEAD SCREW |
67. | [1] | 146751-0020 | MANIFOLD-PRESSURE COMP. |
67/1. | [1] | 146806-3720 | GOVERNOR COVER |
67/2. | [1] | 146515-4820 | CONTROL SHAFT |
67/3. | [1] | 146600-0100 | O-RING |
67/4. | [2] | 139310-0200 | PLAIN WASHER |
67/4. | [2] | 139310-0200 | PLAIN WASHER |
67/5. | [1] | 146530-0000 | CONTROL LEVER |
67/5B. | [1] | 146530-0100 | CONTROL LEVER STAMP 001 |
67/5C. | [1] | 146832-1500 | CONTROL LEVER |
67/5D. | [1] | 146832-1600 | CONTROL LEVER |
67/6. | [2] | 014110-6440 | LOCKING WASHER D12.2&6.1T1.5 |
67/6. | [2] | 014110-6440 | LOCKING WASHER D12.2&6.1T1.5 |
67/7. | [1] | 013020-6040 | UNION NUT |
67/8. | [1] | 146515-1820 | LEVER SHAFT |
67/9. | [1] | 146587-4500 | COILED SPRING |
67/10. | [1] | 146600-0200 | O-RING |
67/11. | [1] | 146602-0100 | PLAIN WASHER |
67/12. | [1] | 146540-5600 | CONTROL LEVER |
67/12B. | [1] | 146540-5700 | CONTROL LEVER |
67/12C. | [1] | 146540-5800 | CONTROL LEVER |
67/12D. | [1] | 146540-5900 | CONTROL LEVER |
67/13. | [1] | 146621-1700 | UNION NUT |
67/14. | [1] | 146621-1700 | UNION NUT |
67/15. | [1] | 146526-3000 | BLEEDER SCREW |
67/16. | [1] | 146526-3000 | BLEEDER SCREW |
67/18. | [1] | 146587-2000 | COILED SPRING |
67/19. | [1] | 146541-0000 | ANGLE PIECE |
67/23. | [1] | 146936-6520 | BRACKET |
67/24. | [2] | 139006-4500 | BLEEDER SCREW |
67/25. | [1] | 013020-6040 | UNION NUT |
67/26. | [1] | 146925-2920 | BRACKET |
67/31. | [1] | 146710-0800 | BUSHING |
67/32. | [1] | 146711-0000 | PLATE |
67/33. | [1] | 139218-0400 | UNION NUT |
67/34. | [1] | 146712-0700 | BEARING PIN |
67/35. | [1] | 146621-0300 | UNION NUT |
67/36. | [1] | 146600-1400 | O-RING |
67/37. | [1] | 146710-0100 | BUSHING |
67/38. | [1] | 139506-0200 | GASKET |
67/39. | [1] | 146620-0300 | CAPSULE |
67/40. | [1] | 026512-1540 | GASKET |
67/41. | [1] | 146713-4100 | ADJUSTING PIN |
67/42. | [2] | 146714-0000 | PLATE |
67/43. | [1] | 146715-0000 | DIAPHRAGM |
67/44. | [1] | 139306-0100 | LOCKING WASHER |
67/45. | [1] | 013030-6040 | UNION NUT |
67/46. | [1] | 146716-0000 | UNION NUT |
67/47. | [1] | 146717-2600 | COILED SPRING |
67/48/1. | [1] | 146720-0000 | SPACER BUSHING L3.7 |
67/48/1. | [1] | 146720-0100 | SPACER BUSHING L3.9 |
67/48/1. | [1] | 146720-0200 | SPACER BUSHING L4.1 |
67/48/1. | [1] | 146720-0300 | SPACER BUSHING L4.3 |
67/48/1. | [1] | 146720-0400 | SPACER BUSHING L4.5 |
67/48/1. | [1] | 146720-0500 | SPACER BUSHING L4.7 |
67/48/1. | [1] | 146720-0600 | SPACER BUSHING L4.9 |
67/48/1. | [1] | 146720-0700 | SPACER BUSHING L5.1 |
67/48/1. | [1] | 146720-0800 | SPACER BUSHING L5.3 |
67/48/1. | [1] | 146720-0900 | SPACER BUSHING L2.7 |
67/48/1. | [1] | 146720-1000 | SPACER BUSHING L2.9 |
67/48/1. | [1] | 146720-1100 | SPACER BUSHING L3.1 |
67/48/1. | [1] | 146720-1200 | SPACER BUSHING L3.3 |
67/48/1. | [1] | 146720-1300 | SPACER BUSHING L3.5 |
67/48/1. | [1] | 146720-1400 | SPACER BUSHING L2.8 |
67/48/1. | [1] | 146720-1500 | SPACER BUSHING L3.0 |
67/48/1. | [1] | 146720-1600 | SPACER BUSHING L3.2 |
67/48/1. | [1] | 146720-1700 | SPACER BUSHING L3.4 |
67/48/1. | [1] | 146720-1800 | SPACER BUSHING L3.6 |
67/48/1. | [1] | 146720-1900 | SPACER BUSHING L3.8 |
67/48/1. | [1] | 146720-2000 | SPACER BUSHING L4.0 |
67/48/1. | [1] | 146720-2100 | SPACER BUSHING L4.2 |
67/48/1. | [1] | 146720-2200 | SPACER BUSHING L4.4 |
67/48/1. | [1] | 146720-2300 | SPACER BUSHING L4.6 |
67/48/1. | [1] | 146720-2400 | SPACER BUSHING L4.8 |
67/48/1. | [1] | 146720-2500 | SPACER BUSHING L5.0 |
67/48/1. | [1] | 146720-2600 | SPACER BUSHING L5.2 |
67/48/1. | [1] | 146720-2700 | SPACER BUSHING L5.4 |
67/48/1. | [1] | 146720-2800 | SPACER BUSHING L5.5 |
67/48/1. | [1] | 146720-2900 | SPACER BUSHING L5.6 |
67/48/1. | [1] | 146720-4500 | SPACER BUSHING L1.8 |
67/48/1. | [1] | 146720-4600 | SPACER BUSHING L1.9 |
67/48/1. | [1] | 146720-4700 | SPACER BUSHING L2.0 |
67/48/1. | [1] | 146720-4800 | SPACER BUSHING L2.1 |
67/48/1. | [1] | 146720-4900 | SPACER BUSHING L2.2 |
67/48/1. | [1] | 146720-5000 | SPACER BUSHING L2.3 |
67/48/1. | [1] | 146720-5100 | SPACER BUSHING L2.4 |
67/48/1. | [1] | 146720-5200 | SPACER BUSHING L2.5 |
67/48/1. | [1] | 146720-5300 | SPACER BUSHING L2.6 |
67/48/1. | [1] | 146725-2500 | SPACER BUSHING L5.7 |
67/48/1. | [1] | 146725-2600 | SPACER BUSHING L5.8 |
67/48/1. | [1] | 146725-2700 | SPACER BUSHING L5.9 |
67/48/1. | [1] | 146725-2800 | SPACER BUSHING L6.0 |
67/48/1. | [1] | 146725-2900 | SPACER BUSHING L6.1 |
67/48/1. | [1] | 146725-3000 | SPACER BUSHING L6.2 |
67/48/1. | [1] | 146725-3100 | SPACER BUSHING L6.3 |
67/48/1. | [1] | 146725-3200 | SPACER BUSHING L6.4 |
67/48/1. | [1] | 146725-3300 | SPACER BUSHING L6.5 |
67/48/1. | [1] | 146725-3400 | SPACER BUSHING L6.6 |
67/48/1. | [1] | 146725-3500 | SPACER BUSHING L6.7 |
67/48/1. | [1] | 146725-3600 | SPACER BUSHING L6.8 |
67/48/1. | [1] | 146725-3700 | SPACER BUSHING L6.9 |
67/48/1. | [1] | 146725-3800 | SPACER BUSHING L7.0 |
67/48/1. | [1] | 146725-3900 | SPACER BUSHING L7.1 |
67/48/1. | [1] | 146725-4000 | SPACER BUSHING L7.2 |
67/48/1. | [1] | 146725-4100 | SPACER BUSHING L7.3 |
67/48/1. | [1] | 146725-4200 | SPACER BUSHING L7.4 |
67/48/1. | [1] | 146725-4300 | SPACER BUSHING L7.5 |
67/49. | [1] | 146721-5620 | COVER |
67/50. | [1] | 146722-0200 | FLAT-HEAD SCREW |
67/51. | [1] | 146600-0300 | O-RING |
67/53. | [1] | 013020-6040 | UNION NUT |
67/54. | [3] | 139006-4400 | BLEEDER SCREW |
67/55. | [1] | 146622-2300 | BLEEDER SCREW |
67/56. | [1] | 146723-0200 | CONTROL LEVER |
67/57. | [1] | 146712-0100 | BEARING PIN |
67/58. | [2] | 146620-0600 | CAPSULE |
67/59. | [2] | 026506-1040 | GASKET |
67/60. | [1] | 146724-0300 | ELEMENT |
67/61. | [1] | 146724-0600 | CAPSULE |
67/78. | [1] | 146600-4400 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-4600 | THREADED PIN L=24MM |
67/201B. | [1] | 146545-4700 | THREADED PIN L=26MM |
67/201C. | [1] | 146545-4800 | THREADED PIN L=28MM |
67/201D. | [1] | 146545-5000 | THREADED PIN |
67/202. | [1] | 146598-5000 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
67/204. | [1] | 146545-4500 | DAMPER |
95. | [1] | 146855-2120 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1.0 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0300 | UNION NUT |
108. | [1] | 146570-0520 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-2600 | PLAIN WASHER |
115. | [1] | 146976-3200 | SLIDING SLEEVE |
116. | [1] | 146576-0400 | CAP |
117/1. | [1] | 146877-0820 | PLUG L=5.0 |
117/1. | [1] | 146877-0920 | PLUG L=5.1 |
117/1. | [1] | 146877-1020 | PLUG L=5.2 |
117/1. | [1] | 146877-1120 | PLUG L=5.3 |
117/1. | [1] | 146877-1220 | PLUG L=5.4 |
117/1. | [1] | 146877-1320 | PLUG L=5.5 |
117/1. | [1] | 146877-1420 | PLUG L=5.6 |
117/1. | [1] | 146877-1520 | PLUG L=5.7 |
117/1. | [1] | 146877-1620 | PLUG L=5.8 |
117/1. | [1] | 146877-1720 | PLUG L=5.9 |
117/1. | [1] | 146877-1820 | PLUG L=6.0 |
117/1. | [1] | 146877-1920 | PLUG L=6.1 |
117/1. | [1] | 146877-2020 | PLUG L=6.2 |
117/1. | [1] | 146877-2120 | PLUG L=6.3 |
117/1. | [1] | 146877-2220 | PLUG L=6.4 |
117/1. | [1] | 146877-2320 | PLUG L=6.5 |
117/1. | [1] | 146877-2420 | PLUG L=6.6 |
117/1. | [1] | 146877-2520 | PLUG L=6.7 |
117/1. | [1] | 146877-2620 | PLUG L=6.8 |
117/1. | [1] | 146877-2720 | PLUG L=6.9 |
117/1. | [1] | 146877-2820 | PLUG L=7.0 |
117/1. | [1] | 146877-2920 | PLUG L=7.1 |
117/1. | [1] | 146877-3020 | PLUG L=7.2 |
117/1. | [1] | 146877-3120 | PLUG L=7.3 |
117/1. | [1] | 146877-3220 | PLUG L=7.4 |
117/1. | [1] | 146877-3320 | PLUG L=7.5 |
117/1. | [1] | 146877-3420 | PLUG L=7.6 |
117/1. | [1] | 146877-3520 | PLUG L=7.7 |
117/1. | [1] | 146877-3620 | PLUG L=7.8 |
117/1. | [1] | 146877-3720 | PLUG L=7.9 |
117/1. | [1] | 146877-3820 | PLUG L=8.0 |
117/1. | [1] | 146877-3920 | PLUG L=8.1 |
117/1. | [1] | 146877-4020 | PLUG L=8.2 |
117/1. | [1] | 146877-4120 | PLUG L=8.3 |
117/1. | [1] | 146877-4220 | PLUG L=8.4 |
120. | [1] | 146879-7020 | RETAINING PIN |
122. | [1] | 146580-2100 | GOVERNOR SPRING |
123. | [4] | 146620-0500 | HEX-SOCKET-HEAD CAP SCREW |
130. | [1] | 146421-1120 | CAPSULE |
130/2. | [1] | 139508-0200 | GASKET |
130/3. | [1] | 146422-0300 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0220 | CONTROL VALVE STAMP 02 |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146120-1820 | OVER FLOW VALVE |
137. | [2] | 139512-0500 | GASKET |
205. | [1] | 029470-4030 | WOODRUFF KEY |
232. | [1] | 146931-3200 | BRACKET STAMP 132 |
234. | [1] | 139006-4800 | BLEEDER SCREW |
237. | [1] | 146620-0200 | HEX-SOCKET-HEAD CAP SCREW |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
242. | [1] | 146662-1420 | WIRE |
243. | [1] | 146621-4901 | UNION NUT |
245. | [3] | 139512-0500 | GASKET |
246. | [1] | 146125-0020 | EYE BOLT |
248. | [1] | 146614-0200 | SPACER BUSHING |
280. | [1] | 146361-6720 | START ADVANCE ASSY |
281. | [1] | 146600-0800 | O-RING |
282. | [2] | 010206-1240 | HEX-SOCKET-HEAD CAP SCREW |
286. | [1] | 020106-3040 | BLEEDER SCREW |
287. | [1] | 014010-6140 | PLAIN WASHER D13&6.5T1.0 |
343. | [1] | 146598-8320 | CAP |
346. | [2] | 154062-2800 | BLEEDER SCREW |
800S. | [1] | 146020-3820 | PUMP HOUSING |
800S/1/6. | [1] | 146601-1100 | PACKING RING |
804S. | [1] | 146232-0720 | COMPRESSION SPRING |
805S. | [1] | 146574-0320 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
812S. | [1] | 146600-1920 | PARTS SET |
821S. | [1] | 146210-9420 | ROLLER SET |
825S. | [1] | 146598-8120 | CAP |
826S. | [1] | 154062-2720 | CAP |
835S. | [1] | 146598-7320 | CAP |
836S/1. | [1] | 146598-0600 | CAP L18 |
836S/1. | [1] | 146598-0700 | CAP L21 |
836S/1. | [1] | 146598-0800 | CAP L24 |
836S/1. | [1] | 146598-0900 | CAP L27 |
837S. | [1] | 146598-7310 | CAP |
903. | [1] | 146620-0120 | CAPSULE |
903/2. | [1] | 146600-1300 | O-RING |
906. | [1] | 146985-0700 | NAMEPLATE |
Include in #2:
104742-7591
as INJECTION-PUMP ASSEMBLY
Cross reference number
BOSCH
F 01G 09W 0EP
f01g09w0ep
ZEXEL
104742-7591
1047427591
KOMATSU
6274711120
6274711120
Zexel num
Bosch num
Firm num
Name
Calibration Data:
Adjustment conditions
Test oil
1404 Test oil ISO4113orSAEJ967d
1404 Test oil ISO4113orSAEJ967d
Test oil temperature
degC
45
45
50
Nozzle
105780-0060
Bosch type code
NP-DN0SD1510
Nozzle holder
105780-2150
Opening pressure
MPa
13
13
13.3
Opening pressure
kgf/cm2
133
133
136
Injection pipe
157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450
Inside diameter - outside diameter - length (mm) mm 2-6-450
Joint assembly
157641-4720
Tube assembly
157641-4020
Transfer pump pressure
kPa
20
20
20
Transfer pump pressure
kgf/cm2
0.2
0.2
0.2
Direction of rotation (viewed from drive side)
Right R
Right R
Timer measuring device installation position
Low pressure side LOW PRESSURE SIDE
Low pressure side LOW PRESSURE SIDE
Injection timing adjustment
Pump speed
r/min
500
500
500
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
73.3
72.8
73.8
Basic
*
Oil temperature
degC
48
46
50
Remarks
NA
NA
Injection timing adjustment_02
Pump speed
r/min
800
800
800
Boost pressure
kPa
40
38.7
41.3
Boost pressure
mmHg
300
290
310
Average injection quantity
mm3/st.
110.2
109.7
110.7
Basic
*
Oil temperature
degC
50
48
52
Remarks
CBS
CBS
Injection timing adjustment_03
Pump speed
r/min
800
800
800
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
117.9
117.4
118.4
Difference in delivery
mm3/st.
9.5
Basic
*
Oil temperature
degC
50
48
52
Remarks
Full
Full
Injection timing adjustment_04
Pump speed
r/min
500
500
500
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
73.3
72.3
74.3
Basic
*
Oil temperature
degC
48
46
50
Remarks
NA
NA
Injection timing adjustment_05
Pump speed
r/min
800
800
800
Boost pressure
kPa
40
38.7
41.3
Boost pressure
mmHg
300
290
310
Average injection quantity
mm3/st.
110.2
108.7
111.7
Basic
*
Oil temperature
degC
50
48
52
Remarks
CBS
CBS
Injection timing adjustment_06
Pump speed
r/min
800
800
800
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
117.9
116.4
119.4
Difference in delivery
mm3/st.
10
Basic
*
Oil temperature
degC
50
48
52
Remarks
Full
Full
Injection timing adjustment_07
Pump speed
r/min
1100
1100
1100
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
122.1
116.1
128.1
Oil temperature
degC
50
48
52
Injection quantity adjustment
Pump speed
r/min
1253
1253
1253
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
30.8
26.8
34.8
Difference in delivery
mm3/st.
7
Basic
*
Oil temperature
degC
50
48
52
Injection quantity adjustment_02
Pump speed
r/min
1428
1428
1428
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
5
Oil temperature
degC
50
48
52
Injection quantity adjustment_03
Pump speed
r/min
1253
1253
1253
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
30.8
26.3
35.3
Basic
*
Oil temperature
degC
50
48
52
Governor adjustment
Pump speed
r/min
418
418
418
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
7.2
5.2
9.2
Difference in delivery
mm3/st.
3
Basic
*
Oil temperature
degC
48
46
50
Governor adjustment_02
Pump speed
r/min
418
418
418
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
7.2
4.7
9.7
Difference in delivery
mm3/st.
3.5
Basic
*
Oil temperature
degC
48
46
50
Timer adjustment
Pump speed
r/min
100
100
100
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
130.5
125.5
135.5
Basic
*
Oil temperature
degC
48
46
50
Remarks
IDLE
IDLE
Timer adjustment_02
Pump speed
r/min
100
100
100
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
130.5
125.5
135.5
Oil temperature
degC
48
46
50
Remarks
IDLE
IDLE
Speed control lever angle
Pump speed
r/min
418
418
418
Boost pressure
kPa
0
0
0
Boost pressure
mmHg
0
0
0
Average injection quantity
mm3/st.
0
0
0
Oil temperature
degC
48
46
50
Remarks
Magnet OFF at idling position
Magnet OFF at idling position
0000000901
Pump speed
r/min
1100
1100
1100
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Overflow quantity
cm3/min
630
500
760
Oil temperature
degC
50
48
52
Stop lever angle
Pump speed
r/min
1100
1100
1100
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Pressure
kPa
402
382
422
Pressure
kgf/cm2
4.1
3.9
4.3
Basic
*
Oil temperature
degC
50
48
52
Remarks
Full
Full
Stop lever angle_02
Pump speed
r/min
800
800
800
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Pressure
kPa
275
226
324
Pressure
kgf/cm2
2.8
2.3
3.3
Oil temperature
degC
50
48
52
Stop lever angle_03
Pump speed
r/min
1000
1000
1000
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Pressure
kPa
373
324
422
Pressure
kgf/cm2
3.8
3.3
4.3
Oil temperature
degC
50
48
52
Stop lever angle_04
Pump speed
r/min
1100
1100
1100
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Pressure
kPa
402
373
431
Pressure
kgf/cm2
4.1
3.8
4.4
Basic
*
Oil temperature
degC
50
48
52
Remarks
Full
Full
0000001101
Pump speed
r/min
1100
1100
1100
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Timer stroke
mm
0.7
0.5
0.9
Basic
*
Oil temperature
degC
50
48
52
Remarks
Full
Full
_02
Pump speed
r/min
800
800
800
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Timer stroke
mm
0.3
Oil temperature
degC
50
48
52
_03
Pump speed
r/min
1100
1100
1100
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Timer stroke
mm
0.7
0.4
1
Basic
*
Oil temperature
degC
50
48
52
Remarks
Full
Full
0000001201
Max. applied voltage
V
8
8
8
Test voltage
V
13
12
14
0000001401
Pump speed
r/min
800
800
800
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
30.5
29.5
31.5
Timer stroke TA
mm
1.6
1.3
1.9
Timer stroke variation dT
mm
1.6
1.6
1.6
Basic
*
Oil temperature
degC
50
48
52
Remarks
Reverse operation
Reverse operation
_02
Pump speed
r/min
800
800
800
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
30.5
29
32
Timer stroke TA
mm
1.6
1.2
2
Timer stroke variation dT
mm
1.6
1.6
1.6
Basic
*
Oil temperature
degC
50
48
52
Remarks
Reverse operation
Reverse operation
_03
Pump speed
r/min
800
800
800
Boost pressure
kPa
73.3
72
74.6
Boost pressure
mmHg
550
540
560
Average injection quantity
mm3/st.
15
13
17
Timer stroke TA
mm
2
2
Timer stroke variation dT
mm
2
2
Oil temperature
degC
50
48
52
Remarks
Reverse operation
Reverse operation
Timing setting
K dimension
mm
3.1
3
3.2
KF dimension
mm
5.5
5.4
5.6
MS dimension
mm
1.4
1.3
1.5
BCS stroke
mm
2.7
2.5
2.9
Pre-stroke
mm
0.45
0.43
0.47
Control lever angle alpha
deg.
16
12
20
Control lever angle beta
deg.
29
24
34
Test data Ex:
0000001601 BOOST COMPENSATOR ADJUSTMENT
BCS adjustment procedure
1. At full boost pressure, set so that the full injection quantity is within the specifications (adjusting point).
2. Perform boost compensator intermediate operation point adjustment (pump speed N1, boost pressure P1).
3. When injection quantity at boost pressure P2 and pump speed N2 is not as specified, loosen nut (A) and adjust position of screw (B) so that injection quantity is as specified. The screw position should be within +-1 turn of initial position.
4. The nut tightening torque is T.
----------
N1=800r/min N2=500r/min P1=40.0kPa(300mmHg) P2=0kPa(0mmHg) T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)
----------
N1=800r/min N2=500r/min P1=40.0kPa(300mmHg) P2=0kPa(0mmHg) T=6~9N-m(0.6~0.9kgf-m)
----------
SW=10mm T=6~9N-m(0.6~0.9kgf-m)
0000001801 STARTING I/Q ADJUSTMENT
Starting Q decrease lever adjustment
Adjust using the screw (A) so that the standards are satisfied, then fix using the nut (B).
Screw (A) protrusion: L
(B) Nut (SW10, T1 after completing adjustment)
(C) Stop lever
----------
L=7.4~11.1mm T1=6~9N-m(0.6~0.9kgf-m)
----------
L=7.4~11.1mm
----------
L=7.4~11.1mm T1=6~9N-m(0.6~0.9kgf-m)
----------
L=7.4~11.1mm
0000001901 W-CSD ADJUSTMENT
Adjustment of the W-CSD
Adjustment of the timer advance angle
1. Determine the timer advance angle using the graph (graph TA).
X:Temperature t (deg C)
Y:Timer stroke TA (mm)
(S) Cold advance
(R) Cooling water temperature (deg C)
(T) Timer piston stroke (mm)
(B) Standard point
----------
TA=-0.053t+3.881(-3<=t<=20) TA=-0.0517t+3.854(20<=t)
----------
a=76.5++deg b=20degC c=-3degC d=0mm e=2.82+-0.4mm f=4.04+-0.6mm
----------
TA=-0.053t+3.881(-3<=t<=20) TA=-0.0517t+3.854(20<=t)
----------
a=76.5++deg b=20degC c=-3degC d=0mm e=2.82+-0.4mm f=4.04+-0.6mm
0000002001 TAMPER PROOF
Tamperproof installation procedure
A:Cap
B:Rubber vibration damper
C:Nut
D:Cap
E:Position of break
L1:Inspection dimension
Fig. 1 Regulating valve seal
1) Insert the cap A horizontally (press fit).
2) After insertion (press-fitting), tighten the cap to torque T1, and confirm that it is not pulled out at load F1.
Fig.2 Full load adjusting screw
1) Confirm the position of the rubber vibration damper (B) and then tighten nut (C) to the torque T2.
Fig. 3 External-adjustment type cover governor seal
1) Target breaking torque T3
----------
L1=23~28mm F1=49N(5kgf) T1=4.9N-m(0.5kgf-m) T2=7~9N-m(0.7~0.9kgf-m) T3=2.94~4.41N-m(0.3~0.45kgf-m)
----------
L1=23~28mm
----------
L1=23~28mm F1=49N(5kgf) T1=4.9N-m(0.5kgf-m) T2=7~9N-m(0.7~0.9kgf-m) T3=2.94~4.41N-m(0.3~0.45kgf-m)
----------
L1=23~28mm