104742-7252 ZEXEL 9 460 614 978 BOSCH INJECTION-PUMP ASSEMBLY 9460614978 1047427252 12969751951

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104742-7252 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 614 978 9460614978

ZEXEL 104742-7252 1047427252

YANMAR 12969751951 12969751951

Components :

0.	INJECTION-PUMP ASSEMBLY	104742-7252
1.	_
2.	FUEL INJECTION PUMP
3.	NUMBER PLATE	146910-8000
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE
7.	NOZZLE AND HOLDER ASSY
8.	Nozzle and Holder
9.	Open Pre:MPa(Kqf/cm2)
10.	NOZZLE-HOLDER
11.	NOZZLE

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0820	DRIVE SHAFT
12/1.	[1]	146200-0800	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-8420	ROLLER SET
24.	[1]	146303-0400	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0301	SLOTTED WASHER
29.	[1]	146220-5020	CAM PLATE
30.	[1]	146600-0800	O-RING
31.	[1]	146300-4800	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-4100	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-0800	O-RING
37.	[1]	146310-0700	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-5200	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM D17&5.2T2.1
48/1.	[1]	146690-5900	SHIM D17&5.2T2.2
48/1.	[1]	146690-6000	SHIM D17&5.2T2.3
48/1.	[1]	146690-6100	SHIM D17&5.2T2.4
48/1.	[1]	146690-6200	SHIM D17&5.2T2.5
48/1.	[1]	146690-6300	SHIM D17&5.2T2.6
48/1.	[1]	146690-6400	SHIM D17&5.2T2.7
48/1.	[1]	146690-6500	SHIM D17&5.2T2.8
48/1.	[1]	146690-6600	SHIM D17&5.2T2.9
48/1.	[1]	146690-6700	SHIM D17&5.2T3.0
48/1.	[1]	146690-6800	SHIM D17&5.2T3.1
48/1.	[1]	146690-6900	SHIM D17&5.2T3.2
48/1.	[1]	146690-7000	SHIM D17&5.2T3.3
48/1.	[1]	146690-7100	SHIM D17&5.2T3.4
48/1.	[1]	146690-7200	SHIM D17&5.2T0.4
48/1.	[1]	146690-7300	SHIM D17&5.2T0.6
48/1.	[1]	146690-7400	SHIM D17&5.2T0.7
48/1.	[1]	146690-7500	SHIM D17&5.2T1.9
48/1.	[1]	146690-7800	SHIM D17&5.2T0.2
49.	[2]	146234-0600	GUIDE PIN
50.	[1]	146402-4620	HYDRAULIC HEAD
50.	[1]	146402-4620	HYDRAULIC HEAD
50.	[1]	146402-4620	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET
58.	[4]	146440-2520	PRESSURE-CONTROL VALVE
60.	[4]	139106-0100	FLAT-HEAD SCREW
67.	[1]	146821-6620	GOVERNOR COVER
67/1.	[1]	146508-6321	GOVERNOR COVER
67/2.	[1]	146515-2520	CONTROL SHAFT
67/3.	[1]	146600-0100	O-RING
67/4.	[2]	139310-0200	PLAIN WASHER
67/4.	[2]	139310-0200	PLAIN WASHER
67/5.	[1]	146831-7900	CONTROL LEVER
67/5B.	[1]	146831-8000	CONTROL LEVER
67/5C.	[1]	146832-4400	CONTROL LEVER
67/5D.	[1]	146832-4500	CONTROL LEVER
67/6.	[2]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
67/6.	[2]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
67/7.	[1]	013020-6040	UNION NUT
67/8.	[1]	146515-1120	LEVER SHAFT
67/9.	[1]	146587-4600	COILED SPRING
67/10.	[1]	146600-0200	O-RING
67/11.	[1]	146602-0100	PLAIN WASHER
67/12.	[1]	146540-0000	CONTROL LEVER
67/13.	[1]	013020-6040	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-4500	BLEEDER SCREW
67/16.	[1]	146526-2800	BLEEDER SCREW
67/17.	[1]	146526-0000	FLAT-HEAD SCREW
67/18.	[1]	146587-4000	COILED SPRING
67/19.	[1]	146541-0000	ANGLE PIECE
67/23.	[1]	146613-1300	BRACKET
67/24.	[2]	139006-4700	BLEEDER SCREW
67/25.	[2]	013020-6040	UNION NUT
67/25.	[2]	013020-6040	UNION NUT
67/78.	[1]	146600-4400	SEAL RING
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-3400	THREADED PIN L53.00
67/201B.	[1]	146545-3500	THREADED PIN L55.00
67/201C.	[1]	146545-3600	THREADED PIN L57.00
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
95.	[1]	146871-1020	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1.0
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0100	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146975-4200	SLIDING SLEEVE
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-1800	PLUG L2.10
117/1.	[1]	146577-1900	PLUG L2.30
117/1.	[1]	146577-2000	PLUG L2.50
117/1.	[1]	146577-2100	PLUG L2.70
117/1.	[1]	146577-2200	PLUG L2.90
117/1.	[1]	146577-2300	PLUG L3.10
117/1.	[1]	146577-2400	PLUG L3.30
117/1.	[1]	146577-2500	PLUG L3.50
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-3200	PLUG L4.90
117/1.	[1]	146577-3300	PLUG L5.10
117/1.	[1]	146577-6700	PLUG L2.2
117/1.	[1]	146577-6800	PLUG L2.4
117/1.	[1]	146577-6900	PLUG L2.6
117/1.	[1]	146577-7000	PLUG L2.8
117/1.	[1]	146577-7100	PLUG L3.0
117/1.	[1]	146577-7200	PLUG L3.2
117/1.	[1]	146577-7300	PLUG L3.4
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
117/1.	[1]	146577-8000	PLUG L4.8
117/1.	[1]	146577-8100	PLUG L5.0
117/1.	[1]	146877-0000	PLUG L5.2
117/1.	[1]	146877-0100	PLUG L5.3
117/1.	[1]	146877-0200	PLUG L5.4
117/1.	[1]	146877-0300	PLUG L5.5
117/1.	[1]	146877-4700	PLUG L5.6
117/1.	[1]	146877-4800	PLUG L5.7
117/1.	[1]	146877-4900	PLUG L5.8
117/1.	[1]	146877-5000	PLUG L5.9
120.	[1]	146879-5620	RETAINING PIN
122.	[1]	146580-0600	GOVERNOR SPRING
123.	[4]	139106-0200	FLAT-HEAD SCREW
130.	[1]	146421-1120	CAPSULE
130/2.	[1]	139508-0200	GASKET
130/3.	[1]	146422-0300	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0220	CONTROL VALVE STAMP 02
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-2620	OVER FLOW VALVE
238.	[1]	146655-0400	COILED SPRING
240.	[1]	146688-2820	PULLING ELECTROMAGNET
240/4.	[1]	146600-1700	O-RING
240/7.	[1]	146600-1700	O-RING
242.	[1]	146662-4920	WIRE
243.	[1]	146621-4901	UNION NUT
800S.	[1]	146018-9820	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-1720	COMPRESSION SPRING
805S.	[1]	146574-0720	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
821S.	[1]	146210-5820	ROLLER SET
835S.	[1]	146598-1000	CAP
836S/1.	[1]	146598-0600	CAP L18
836S/1.	[1]	146598-0700	CAP L21
836S/1.	[1]	146598-0800	CAP L24
836S/1.	[1]	146598-0900	CAP L27
906.	[1]	146910-8000	NAMEPLATE
907.	[1]	029470-4030	WOODRUFF KEY
908.	[1]	013121-4140	UNION NUT
909.	[1]	029321-4050	LOCKING WASHER

Include in #2:

104742-7252 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 614 978 9460614978

ZEXEL 104742-7252 1047427252

YANMAR 12969751951 12969751951

Zexel num

Bosch num

Firm num

Name

104742-7252

9 460 614 978

12969751951 YANMAR

INJECTION-PUMP ASSEMBLY
4JH3 K 11CJ INJECTION PUMP ASSY VE4 VE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 67.6 67.1 68.1

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 47.5 41.5 53.5

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 45.6 39.6 51.6

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 900 900 900

Average injection quantity mm3/st. 54.1 49.6 58.6

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 1350 1350 1350

Average injection quantity mm3/st. 70.4 66.4 74.4

Oil temperature degC 50 48 52

Injection timing adjustment_06

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 67.6 66.6 68.6

Difference in delivery mm3/st. 6

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_07

Pump speed r/min 1800 1800 1800

Average injection quantity mm3/st. 64.3 60.3 68.3

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 2050 2050 2050

Average injection quantity mm3/st. 7.3 4.3 10.3

Difference in delivery mm3/st. 3

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2200 2200 2200

Average injection quantity mm3/st. 3

Oil temperature degC 52 50 54

Injection quantity adjustment_03

Pump speed r/min 2050 2050 2050

Average injection quantity mm3/st. 7.3 2.8 11.8

Difference in delivery mm3/st. 3

Basic *

Oil temperature degC 52 50 54

Governor adjustment

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 17.2 15.2 19.2

Difference in delivery mm3/st. 3

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 17.2 14.7 19.7

Difference in delivery mm3/st. 3

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 85 65 105

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 85 65 105

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_03

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 85 65 105

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet ON at idling position and reversed operate

Speed control lever angle_02

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet ON at idling position and reversed operate

Speed control lever angle_03

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position and stop lever operate

Speed control lever angle_04

Pump speed r/min 325 325 325

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position and stop lever operate

0000000901

Pump speed r/min 1050 1050 1050

Overflow quantity cm3/min 1280 1050 1510

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1050 1050 1050

Pressure kPa 510 481 539

Pressure kgf/cm2 5.2 4.9 5.5

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 950 950 950

Pressure kPa 490 451 529

Pressure kgf/cm2 5 4.6 5.4

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1050 1050 1050

Pressure kPa 510 471 549

Pressure kgf/cm2 5.2 4.8 5.6

Basic *

Oil temperature degC 50 48 52

Stop lever angle_04

Pump speed r/min 1800 1800 1800

Pressure kPa 677 638 716

Pressure kgf/cm2 6.9 6.5 7.3

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1050 1050 1050

Timer stroke mm 0.8 0.6 1

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1050 1050 1050

Timer stroke mm 0.8 0.4 1.2

Basic *

Oil temperature degC 50 48 52

_03

Pump speed r/min 1800 1800 1800

Timer stroke mm 1.7 1.2 2.1

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 16 16 16

Test voltage
Reverse operation (At Normal: OFF, At Stop: ON) V 25 24 26

Timing setting

K dimension mm 3.6 3.5 3.7

KF dimension mm 6.85 6.75 6.95

MS dimension mm 0.9 0.8 1

Pre-stroke mm 0.2 0.18 0.22

Control lever angle alpha deg. 25 21 29

Control lever angle beta deg. 43.5 38.5 48.5

Test data Ex:

0000001801 Temp. adjust full-load screw

Temporary full load screw adjustment Set the full load screw protrusion at L mm at assembly.
----------
L=14+-0.5mm
----------
L=14+-0.5mm

0000001901 STOP LEVER ADJUSTMENT

Adjustment of the stop lever 1. Confirm that the starting injection quantity is within standards at the normal position. If below the specified lower limit, move the stop lever serrations one tooth and reconfirm. 2. Pull the stop lever (A) to the fuel cut direction at the standard idling speed of N and adjust the screw (B) to the position Q. Fix nut (C) to the torque T at the position where the clearance between the stop lever and the end of the screw is L mm (the screw is returned 2 turns). The head of the screw must protrude above the face of the nut. If the head of the screw is below the face of the nut, adjust the clearance between the stop lever A and the end of the screw at Q to L mm or more. 3. If adjustment in item 2 is not possible, move the stop lever installation position 1 tooth. 4. The stop lever's operating force is max. M kg (at R = 35). The stop lever must operate smoothly. (D) Normal position (E) Stop position
----------
N=325r/min Q=0mm3/st T=6~9N-m(0.6~0.9kgf-m) L=2mm M=4.0kg
----------
S=Dia6.5+0.09mm R=35mm