104742-1521 ZEXEL 9 460 611 297 BOSCH INJECTION-PUMP ASSEMBLY 9460611297 1047421521 8971396811

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104742-1521 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 611 297 9460611297

ZEXEL 104742-1521 1047421521

ISUZU 8971396811 8971396811

Components :

0.	INJECTION-PUMP ASSEMBLY	104742-1521
1.	_
2.	FUEL INJECTION PUMP	104642-1521
3.	NUMBER PLATE	146967-8300
4.	_
5.	CAPSULE	146620-0120
6.	ADJUSTING DEVICE	146620-4722
7.	NOZZLE AND HOLDER ASSY	105118-6051
8.	Nozzle and Holder	8-97119-812-0
9.	Open Pre:MPa(Kqf/cm2)	18.1{185}
10.	NOZZLE-HOLDER	105048-3673
11.	NOZZLE	105017-1860

Scheme ###:

1/6.	[1]	146601-0700	PACKING RING
6.	[1]	146100-0120	SUPPLY PUMP
9.	[1]	146103-0000	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	146200-0820	DRIVE SHAFT
12/1.	[1]	146200-0800	DRIVE SHAFT
12/2.	[1]	146201-0000	WOODRUFF KEY
12/3.	[2]	146202-0100	DAMPER
12/4.	[1]	146203-0000	TOOTHED GEAR
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	146210-5620	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0100	SLOTTED WASHER
29.	[1]	146220-5520	CAM PLATE
30.	[1]	146600-3000	O-RING
31.	[1]	146300-4000	PUMP PLUNGER
32.	[1]	146301-0000	SLIDING PIECE
33.	[1]	146603-0700	SHIM
34.	[1]	146302-5400	COMPRESSION SPRING
34B.	[1]	146306-2900	COMPRESSION SPRING
34C.	[1]	146302-4800	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-3000	O-RING
37.	[1]	146310-0700	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-5100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[2]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[2]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[2]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[2]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[2]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[2]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[2]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[2]	146690-1400	SHIM D17&5.2T0.9
48/1.	[2]	146690-1500	SHIM D17&5.2T1.1
48/1.	[2]	146690-1600	SHIM D17&5.2T1.3
48/1.	[2]	146690-1700	SHIM D17&5.2T1.4
48/1.	[2]	146690-1800	SHIM D17&5.2T1.6
48/1.	[2]	146690-1900	SHIM D17&5.2T1.7
48/1.	[2]	146690-5800	SHIM
48/1.	[2]	146690-5900	SHIM
48/1.	[2]	146690-6000	SHIM
48/1.	[2]	146690-6100	SHIM
48/1.	[2]	146690-6200	SHIM
48/1.	[2]	146690-6300	SHIM
48/1.	[2]	146690-6400	SHIM
48/1.	[2]	146690-6500	SHIM
48/1.	[2]	146690-6600	SHIM
48/1.	[2]	146690-6700	SHIM
48/1.	[2]	146690-6800	SHIM
48/1.	[2]	146690-6900	SHIM
48/1.	[2]	146690-7000	SHIM
48/1.	[2]	146690-7100	SHIM
48/1.	[2]	146690-7200	SHIM
48/1.	[2]	146690-7300	SHIM
48/1.	[2]	146690-7400	SHIM
48/1.	[2]	146690-7500	SHIM
48/1.	[2]	146690-7800	SHIM
49.	[2]	146234-0120	GUIDE PIN
50.	[1]	146402-4020	HYDRAULIC HEAD
50.	[1]	146402-4020	HYDRAULIC HEAD
50.	[1]	146402-4020	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET
55.	[4]	146430-1420	DELIVERY-VALVE ASSEMBLY VE15
56.	[4]	146432-0200	COMPRESSION SPRING
58.	[4]	146440-1520	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
66.	[1]	146600-0100	O-RING
67.	[1]	146821-1821	GOVERNOR COVER
67/1.	[1]	146505-8122	GOVERNOR COVER
67/13.	[1]	013020-6040	UNION NUT
67/14.	[1]	146621-1700	UNION NUT
67/15.	[1]	146526-2800	BLEEDER SCREW
67/16.	[1]	146526-2800	BLEEDER SCREW
67/23.	[1]	146934-1600	BRACKET
67/24.	[3]	139006-4600	BLEEDER SCREW
67/26.	[1]	146933-7521	BRACKET
67/64.	[1]	146933-7421	BRACKET 374
67/64.	[1]	146933-7421	BRACKET 374
67/68.	[1]	139006-4400	BLEEDER SCREW
67/69.	[2]	010206-1040	HEX-SOCKET-HEAD CAP SCREW
67/78.	[1]	146600-4400	SEAL RING
67/200.	[1]	139308-0300	PLAIN WASHER
67/201.	[1]	146545-3400	THREADED PIN L53.00
67/201B.	[1]	146545-3500	THREADED PIN L55.00
67/201C.	[1]	146545-3600	THREADED PIN L57.00
67/202.	[1]	139208-0900	UNION NUT
67/203.	[1]	146600-1200	O-RING
68.	[1]	146810-5420	CONTROL SHAFT
69.	[1]	139310-0200	PLAIN WASHER
72.	[1]	146831-7320	CONTROL LEVER
72B.	[1]	146831-7420	CONTROL LEVER
73.	[1]	014110-6440	LOCKING WASHER D12.2&6.1T1.5
75.	[1]	013020-6040	UNION NUT
95.	[1]	146865-4220	FULCRUM LEVER
104.	[2]	146568-0000	SLOTTED SPRING PIN
105.	[2]	026508-1140	GASKET D11.4&8.2T1.0
106.	[2]	146588-0500	COILED SPRING
107.	[1]	146569-0300	UNION NUT
108.	[1]	146570-0100	GOVERNOR SHAFT
109.	[1]	146600-0400	O-RING
110/1.	[1]	146571-0000	SHIM D20.2&8.3T1.05
110/1.	[1]	146571-0100	SHIM D20.2&8.3T1.25
110/1.	[1]	146571-0200	SHIM D20.2&8.3T1.45
110/1.	[1]	146571-0300	SHIM D20.2&8.3T1.65
110/1.	[1]	146571-0400	SHIM D20.2&8.3T1.85
110/1.	[1]	146571-0500	SHIM D20.2&8.3T1.15
110/1.	[1]	146571-0600	SHIM D20.2&8.3T1.35
110/1.	[1]	146571-0700	SHIM D20.2&8.3T1.55
110/1.	[1]	146571-0800	SHIM D20.2&8.3T1.75
111.	[1]	146602-0600	PLAIN WASHER
112.	[1]	146572-0020	FLYWEIGHT ASSEMBLY
114.	[1]	146602-0500	PLAIN WASHER
115.	[1]	146975-5500	SLIDING SLEEVE
116.	[1]	146576-0200	CAP
117/1.	[1]	146577-1800	PLUG L2.10
117/1.	[1]	146577-1900	PLUG L2.30
117/1.	[1]	146577-2000	PLUG L2.50
117/1.	[1]	146577-2100	PLUG L2.70
117/1.	[1]	146577-2200	PLUG L2.90
117/1.	[1]	146577-2300	PLUG L3.10
117/1.	[1]	146577-2400	PLUG L3.30
117/1.	[1]	146577-2500	PLUG L3.50
117/1.	[1]	146577-2600	PLUG L3.70
117/1.	[1]	146577-2700	PLUG L3.90
117/1.	[1]	146577-2800	PLUG L4.10
117/1.	[1]	146577-2900	PLUG L4.30
117/1.	[1]	146577-3000	PLUG L4.50
117/1.	[1]	146577-3100	PLUG L4.70
117/1.	[1]	146577-3200	PLUG L4.90
117/1.	[1]	146577-3300	PLUG L5.10
117/1.	[1]	146577-6700	PLUG L2.2
117/1.	[1]	146577-6800	PLUG L2.4
117/1.	[1]	146577-6900	PLUG L2.6
117/1.	[1]	146577-7000	PLUG L2.8
117/1.	[1]	146577-7100	PLUG L3.0
117/1.	[1]	146577-7200	PLUG L3.2
117/1.	[1]	146577-7300	PLUG L3.4
117/1.	[1]	146577-7400	PLUG L3.6
117/1.	[1]	146577-7500	PLUG L3.8
117/1.	[1]	146577-7600	PLUG L4.0
117/1.	[1]	146577-7700	PLUG L4.2
117/1.	[1]	146577-7800	PLUG L4.4
117/1.	[1]	146577-7900	PLUG L4.6
117/1.	[1]	146577-8000	PLUG L4.8
117/1.	[1]	146577-8100	PLUG L5.0
117/1.	[1]	146877-0000	PLUG L5.2
117/1.	[1]	146877-0100	PLUG L5.3
117/1.	[1]	146877-0200	PLUG L5.4
117/1.	[1]	146877-0300	PLUG L5.5
117/1.	[1]	146877-4700	PLUG
117/1.	[1]	146877-4800	PLUG
117/1.	[1]	146877-4900	PLUG
117/1.	[1]	146877-5000	PLUG
123.	[3]	139106-0200	FLAT-HEAD SCREW
124.	[1]	146620-0500	HEX-SOCKET-HEAD CAP SCREW
130.	[1]	146421-1020	CAPSULE
130/2.	[1]	139508-0200	GASKET
130/3.	[1]	146422-0300	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-0620	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	146120-1520	OVER FLOW VALVE
137.	[2]	139512-0500	GASKET
138.	[1]	146668-4621	INLET UNION
205.	[1]	025804-1610	WOODRUFF KEY
206.	[1]	013121-4140	UNION NUT
207.	[1]	029321-4050	LOCKING WASHER
220.	[1]	146587-1100	COILED SPRING
230.	[1]	146933-7200	BRACKET 372
231.	[1]	139006-4800	BLEEDER SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146650-0820	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
242.	[1]	146658-9720	WIRE
243.	[1]	146621-1000	UNION NUT
244.	[1]	020146-1270	BLEEDER SCREW
245.	[3]	139512-0500	GASKET
246.	[1]	146125-0000	EYE BOLT
247.	[1]	146668-3821	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
260.	[1]	146611-2021	BRACKET
261.	[2]	146621-4700	UNION NUT
262.	[1]	139008-0900	BLEEDER SCREW
264.	[1]	016500-5010	O-RING
270.	[1]	146615-4421	TOOTHED GEAR
270/1.	[1]	156221-6500	TOOTHED GEAR
270/2.	[1]	146615-4401	COUPLING PLATE
270/3.	[6]	020006-2070	BLEEDER SCREW
275.	[1]	146612-7820	BRACKET
276.	[2]	010010-1888	BLEEDER SCREW
280.	[1]	146361-4420	START ADVANCE ASSY
281.	[1]	146600-0800	O-RING
282.	[2]	010206-1240	HEX-SOCKET-HEAD CAP SCREW
287.	[1]	020106-3540	BLEEDER SCREW
310.	[1]	146684-9920	POTENTCIOMETER
310/1.	[1]	146684-9900	POTENTCIOMETER
310/2.	[2]	139104-0400	FLAT-HEAD SCREW
310/3.	[1]	146648-2900	JOINT CONNECTION
310/3B.	[1]	146648-3000	JOINT CONNECTION
310/3C.	[1]	146648-3100	JOINT CONNECTION
310/3D.	[1]	146648-3200	JOINT CONNECTION
310/3E.	[1]	146648-3300	JOINT CONNECTION
310/3F.	[1]	146648-4700	JOINT CONNECTION
310/3G.	[1]	146648-5300	JOINT CONNECTION
310/3H.	[1]	146649-1700	JOINT CONNECTION
310/4.	[1]	146661-0601	BOOT
317.	[1]	020146-1270	BLEEDER SCREW
800S.	[1]	146018-7620	PUMP HOUSING
800S/1/6.	[1]	146601-0700	PACKING RING
804S.	[1]	146232-0720	COMPRESSION SPRING
805S.	[1]	146574-0120	PARTS SET
810S.	[1]	146600-1120	REPAIR SET
821S.	[1]	146210-5720	ROLLER SET
835S.	[1]	146598-1000	CAP
836S/1.	[1]	146598-0600	CAP L18
836S/1.	[1]	146598-0700	CAP L21
836S/1.	[1]	146598-0800	CAP L24
836S/1.	[1]	146598-0900	CAP L27
903.	[1]	146620-0120	CAPSULE
903/2.	[1]	146600-1300	O-RING
905.	[1]	146620-4722	ACTUATOR
906.	[1]	146967-8300	NAMEPLATE
912.	[2]	020146-1270	BLEEDER SCREW

Include in #2:

104742-1521 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 611 297 9460611297

ZEXEL 104742-1521 1047421521

ISUZU 8971396811 8971396811

Zexel num

Bosch num

Firm num

Name

104742-1521
104742-1522

9 460 611 297

8971396811 ISUZU

INJECTION-PUMP ASSEMBLY
4HF1-2 * K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Pump speed r/min 960 960 960

Average injection quantity mm3/st. 67.5 67 68

Difference in delivery mm3/st. 5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 56.7 52.2 61.2

Oil temperature degC 48 46 50

Injection timing adjustment_03

Pump speed r/min 960 960 960

Average injection quantity mm3/st. 67.5 66.5 68.5

Difference in delivery mm3/st. 5

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 1280 1280 1280

Average injection quantity mm3/st. 69.7 66.2 73.2

Oil temperature degC 50 48 52

Injection timing adjustment_05

Pump speed r/min 1600 1600 1600

Average injection quantity mm3/st. 65.9 61.4 70.4

Oil temperature degC 50 48 52

Injection quantity adjustment

Pump speed r/min 1925 1925 1925

Average injection quantity mm3/st. 23.1 20.1 26.1

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 50 48 52

Injection quantity adjustment_02

Pump speed r/min 1925 1925 1925

Average injection quantity mm3/st. 23.1 20.1 26.1

Difference in delivery mm3/st. 5.5

Basic *

Oil temperature degC 50 48 52

Governor adjustment

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 12.8 10.8 14.8

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 12.8 10.8 14.8

Difference in delivery mm3/st. 2

Basic *

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 70 30 110

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 42 22 62

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_03

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 42 42 42

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 300 300 300

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1280 1280 1280

Overflow quantity cm3/min 590 460 720

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1280 1280 1280

Pressure kPa 373 353 393

Pressure kgf/cm2 3.8 3.6 4

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1280 1280 1280

Pressure kPa 373 353 393

Pressure kgf/cm2 3.8 3.6 4

Basic *

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 1600 1600 1600

Pressure kPa 471 432 510

Pressure kgf/cm2 4.8 4.4 5.2

Oil temperature degC 50 48 52

0000001101

Pump speed r/min 1280 1280 1280

Timer stroke mm 2.3 2.1 2.5

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1100 1100 1100

Timer stroke mm 0.6 0.6 0.6

Basic *

Oil temperature degC 50 48 52

_03

Pump speed r/min 1280 1280 1280

Timer stroke mm 2.3 2.1 2.5

Oil temperature degC 50 48 52

_04

Pump speed r/min 1600 1600 1600

Timer stroke mm 5.1 4.7 5.5

Oil temperature degC 50 48 52

_05

Pump speed r/min 1800 1800 1800

Timer stroke mm 5.3 5 5.7

Oil temperature degC 50 48 52

0000001201

Max. applied voltage V 16 16 16

Test voltage V 25 24 26

Timing setting

K dimension mm 3.1 3 3.2

KF dimension mm 5.5 5.4 5.6

MS dimension mm 0.8 0.7 0.9

Pre-stroke mm 0.45 0.43 0.47

Control lever angle alpha deg. 18 14 22

Control lever angle beta deg. 35 30 40

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Adjustment of the potentiometer Adjusting method [applied voltage 10 V, dummy bolt (A)] 1. Hold the dummy bolt (A) against the control lever at position N = N1, Q = Q1. Fix using the lock nut. 2. When adjusting the potentiometer, position the control lever to contact the dummy bolt (A). Adjust the potentiometer so that the output voltage V is V1. 3. Remove the dummy bolt (A) after the completion of adjustment. Confirm that the potentiometer output voltage is within the above mentioned standards between the control lever's adjusting point and the idling position. N:Pump speed V:Output voltage Q:Injection quantity P:Boost pressure B:Adjusting point C:Checking point Vi:Applied voltage Q2 = idle lever position Q3 = full speed lever position
----------
N1=960(r/min) Q1=38.3+-0.5(cm3/1,000st) V1=7.63+-0.02(V) Vi=10(V)
----------
N1=960r/min Q1=38.3+-0.5cm3/1,000st V1=7.63+-0.02V Vi=10(V) N2=300(r/min) Q2=12.8+-2.0(cm3/1,000st)(Idle) V2=(1.12)(V) Q3=FULL speed V3=(10.0)(V)

0000001901 W-CSD ADJUSTMENT

Adjustment of the W-CSD Adjustment of the timer advance angle (1)Determine the timer advance angle using the graph. (2)(1) Adjust with the screw so that the timer advance angle determined in the item (1) is obtained. (C): Timer stroke: TA(mm) TA = -0.045t + 3.28 X:Temperature t (deg C) Y:Timer stroke TA (mm)
----------

----------
SW=SW8 T=3.4~4.9Nm(0.35~0.5kgfm)

0000002001 V-FICD ADJUSTMENT

Adjustment of the V-FICD (vacuum-type fast idle control device) 1. Adjust so that the clearance between the control lever pin and the actuator rod is S1. 2. Adjust the actuator stroke adjusting screw so that L is obtained when negative pressure P1 {P2} is applied to the actuator. 3. Confirm that the clearance between the actuator body and the W-CSD housing is at least S2 after adjustment of V-FICD. (A): Pin (B): Rod (C): Lock nut (D): Stroke adjusting screw
----------
S1=1+1mm S2=1.5mm P1=-53.3kPa P2=-400mmHg L=1.37+-0.1mm
----------
S1=1+1mm T1=6.0~0.9Nm(0.6~0.9kgfm) L=1.37+-0.1mm T2=1.2~1.5Nm(0.12~0.15kgfm) S2=1.5mm