104741-6140 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047416140 8943389350


104741-6140 INJECTION-PUMP ASSEMBLY
Rating:
66
Buy INJECTION-PUMP ASSEMBLY 104741-6140 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104741-6140 1047416140
ISUZU 8943389350 8943389350

Cross reference number

ZEXEL 104741-6140 1047416140
ISUZU 8943389350 8943389350


Zexel num
Bosch num
Firm num
Name
104741-6140 
104741-6290 
 
8943389350  ISUZU
INJECTION-PUMP ASSEMBLY
4JA1 *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105000-2010
Bosch type code   NP-DN12SD12TT
Nozzle holder   105780-2080
Opening pressure MPa   14.7 14.7 15.19
Opening pressure kgf/cm2   150 150 155
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-840
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   39.5 39 40
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   35.6 35.6 35.6
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   34.1 31.6 36.6
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   39.5 38.5 40.5
Difference in delivery mm3/st.   3.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   1450 1450 1450
Average injection quantity mm3/st.   41.7 39.2 44.2
Oil temperature degC   50 48 52
Injection timing adjustment_06
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   42.5 39.5 45.5
Difference in delivery mm3/st.   5.5
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   2250 2250 2250
Average injection quantity mm3/st.   12.5 9.5 15.5
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   52 50 54
Injection quantity adjustment_02
Pump speed r/min   2500 2500 2500
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2250 2250 2250
Average injection quantity mm3/st.   12.5 9.5 15.5
Difference in delivery mm3/st.   4
Oil temperature degC   52 50 54
Governor adjustment
Pump speed r/min   390 390 390
Average injection quantity mm3/st.   5.5 3.5 7.5
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   390 390 390
Average injection quantity mm3/st.   5.5 3.5 7.5
Difference in delivery mm3/st.   2
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   60 60 100
Basic   *
Oil temperature degC   48 46 50
Remarks
Full
 
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 60 100
Oil temperature degC   48 46 50
Speed control lever angle
Pump speed r/min   390 390 390
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1600 1600 1600
Overflow quantity with S/T OFF cm3/min   540 410 670
Oil temperature degC   50 48 52
Remarks
MEASURE
 
Stop lever angle
Pump speed r/min   1600 1600 1600
Pressure with S/T OFF kPa   441 421 461
Pressure with S/T OFF kgf/cm2   4.5 4.3 4.7
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   1500 1500 1500
Pressure with S/T OFF kPa   392 392 392
Pressure with S/T OFF kgf/cm2   4 4 4
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   1600 1600 1600
Pressure with S/T OFF kPa   441 421 461
Pressure with S/T OFF kgf/cm2   4.5 4.3 4.7
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_04
Pump speed r/min   1800 1800 1800
Pressure with S/T OFF kPa   539 539 539
Pressure with S/T OFF kgf/cm2   5.5 5.5 5.5
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1600 1600 1600
Timer stroke with S/T OFF mm   2.2 2 2.4
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   900 900 900
Timer stroke with S/T ON mm   0.5 0.5 0.5
Oil temperature degC   50 48 52
_03
Pump speed r/min   1500 1500 1500
Timer stroke with S/T OFF mm   0.5
Oil temperature degC   50 48 52
_04
Pump speed r/min   1600 1600 1600
Timer stroke with S/T OFF mm   2.2 2 2.4
Basic   *
Oil temperature degC   50 48 52
_05
Pump speed r/min   1800 1800 1800
Timer stroke with S/T OFF mm   7 6.7 7.4
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
Timing setting
K dimension mm   2.8 2.8 2.8
KF dimension mm   5 4.9 5.1
MS dimension mm   1 0.9 1.1
Pre-stroke mm   0.45 0.43 0.47
Control lever angle alpha deg.   18 14 22
Control lever angle beta deg.   31 26 36

Test data Ex:

0000001801 V-FICD ADJUSTMENT

Test data 104741-6140
Adjustment of the V-FICD 1. Adjust the actuator rod to obtain S1. 2. Apply negative pressure P1 to the actuator and confirm the full stroke.
----------
S1=1+1mm P1=-53.3kPa(-400mmHg)
----------
S1=1+1mm




Have questions with 104741-6140?





Group cross 104741-6140 ZEXEL

Isuzu 

 
8943272660 
INJECTION-PUMP ASSEMBLY
4JB1
 
8943272670 
INJECTION-PUMP ASSEMBLY
4JB1
 
8943272680 
INJECTION-PUMP ASSEMBLY
4JB1
 
8943357071 
INJECTION-PUMP ASSEMBLY
4JB1PK01
9 460 610 386 
 
INJECTION-PUMP ASSEMBLY
4JB1PK01
9 460 610 744 
8943357072 
INJECTION-PUMP ASSEMBLY
4JB1PK01
104741-6140  

104741-6290 
 
8943389350 
INJECTION-PUMP ASSEMBLY
4JA1
 
8943389360 
INJECTION-PUMP ASSEMBLY
4JA1
 
8943389370 
INJECTION-PUMP ASSEMBLY
4JB1
 
8943389380 
INJECTION-PUMP ASSEMBLY
4JB1
 
8943389390 
INJECTION-PUMP ASSEMBLY
4JB1
 
8943389400 
INJECTION-PUMP ASSEMBLY
4JB1
Back to top