Fuel injectors
  1. Home
  2. injection
  3. #1047414240

104741-4240 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047414240 1670045k00


104741-4240 INJECTION-PUMP ASSEMBLY
Rating:
31
Buy INJECTION-PUMP ASSEMBLY 104741-4240 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104741-4240 1047414240
NISSAN-DIESEL 1670045K00 1670045k00

Cross reference number

ZEXEL 104741-4240 1047414240
NISSAN-DIESEL 1670045K00 1670045k00


Zexel num
Bosch num
Firm num
Name
104741-4240 
104741-4241 
 
1670045K00  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
BD30 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm) mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   54.7 54.2 55.2
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   40.2 40.2 40.2
Oil temperature degC   48 46 50
Injection timing adjustment_03
Pump speed r/min   500 500 500
Average injection quantity mm3/st.   41.6 38.1 45.1
Oil temperature degC   48 46 50
Injection timing adjustment_04
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   50.3 50.3 50.3
Oil temperature degC   50 48 52
Injection timing adjustment_05
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   54.7 53.7 55.7
Difference in delivery mm3/st.   4.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_06
Pump speed r/min   1200 1200 1200
Average injection quantity mm3/st.   60.3 58.3 62.3
Oil temperature degC   50 48 52
Injection quantity adjustment
Pump speed r/min   1350 1350 1350
Average injection quantity mm3/st.   14.1 11.1 17.1
Basic   *
Oil temperature degC   50 48 52
Injection quantity adjustment_02
Pump speed r/min   1350 1350 1350
Average injection quantity mm3/st.   14.1 10.6 17.6
Basic   *
Oil temperature degC   50 48 52
Injection quantity adjustment_03
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   5
Oil temperature degC   50 48 52
Governor adjustment
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8.5 6.5 10.5
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   33.5 27.5 39.5
Oil temperature degC   48 46 50
Governor adjustment_03
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   8.5 6.5 10.5
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 75 85
Basic   *
Oil temperature degC   48 46 50
Remarks
Full  
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   80 75 85
Basic   *
Oil temperature degC   48 46 50
Speed control lever angle
Pump speed r/min   350 350 350
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position  
Speed control lever angle_02
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   5
Oil temperature degC   48 46 50
Remarks
Magnet OFF at full-load position  
0000000901
Pump speed r/min   900 900 900
Overflow quantity cm3/min   340 210 470
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   900 900 900
Pressure kPa   265 236 294
Pressure kgf/cm2   2.7 2.4 3
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   900 900 900
Pressure kPa   265 226 304
Pressure kgf/cm2   2.7 2.3 3.1
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   1100 1100 1100
Pressure kPa   304 265 343
Pressure kgf/cm2   3.1 2.7 3.5
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   900 900 900
Timer stroke mm   1.8 1.6 2
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   900 900 900
Timer stroke mm   1.8 1.4 2.2
Basic   *
Oil temperature degC   50 48 52
_03
Pump speed r/min   1100 1100 1100
Timer stroke mm   3 2.4 3.6
Oil temperature degC   50 48 52
_04
Pump speed r/min   1350 1350 1350
Timer stroke mm   4.1 3.6 4.5
Oil temperature degC   50 48 52
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
Timing setting
K dimension mm   2.8 2.7 2.9
KF dimension mm   5 4.9 5.1
MS dimension mm   1.7 1.6 1.8
Pre-stroke mm   0.45 0.43 0.47
Control lever angle alpha deg.   25 21 29
Control lever angle beta deg.   37 32 42

Test data Ex:

0000001801 STOP LEVER ADJUSTMENT

Test data 104741-4240
Adjustment of the stop lever Adjust adjusting bolt (B) so that the starting injection quantity is within the standard. Fix using nut. (A) Adjusting nut (C) Starting injection quantity adjusting lever
----------

----------
L=15.0~18.5mm




Have questions with 104741-4240?





Group cross 104741-4240 ZEXEL

Nissan-Diesel 

104741-4240  

104741-4241 
 
1670045K00 
INJECTION-PUMP ASSEMBLY
BD30
104741-4241  

104741-4242 
 
1670045K01 
INJECTION-PUMP ASSEMBLY
BD30
104741-4242  

104741-4243 
9 460 612 976 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

104741-4243  

104741-4244 
 
1670045K02 
INJECTION-PUMP ASSEMBLY
BD30
104741-4244  

104741-4245 
9 460 612 977 
1670045K04 
INJECTION-PUMP ASSEMBLY
BD30
104741-4245  
9 460 611 938 
1670045K06 
INJECTION-PUMP ASSEMBLY
BD30
Back to top