104741-1010 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047411010 8941532800


104741-1010 INJECTION-PUMP ASSEMBLY
Rating:
50
Buy INJECTION-PUMP ASSEMBLY 104741-1010 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104741-1010 1047411010
ISUZU 8941532800 8941532800

Cross reference number

ZEXEL 104741-1010 1047411010
ISUZU 8941532800 8941532800


Zexel num
Bosch num
Firm num
Name
104741-1010 
104741-1130 
 
8941532800  ISUZU
INJECTION-PUMP ASSEMBLY
4JB1B * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105000-2010
Bosch type code   NP-DN12SD12TT
Nozzle holder   105780-2080
Opening pressure MPa   14.7 14.7 15.19
Opening pressure kgf/cm2   150 150 155
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-840
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
(Solenoid timer adjustment condition)   OFF
Timer measuring device installation position
Low pressure side
  LOW PRESSURE SIDE
Injection timing adjustment
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   47.5 47 48
Difference in delivery mm3/st.   4
Basic   *
Injection timing adjustment_02
Pump speed r/min   2100 2100 2100
Average injection quantity mm3/st.   13.1 9.6 16.6
Injection timing adjustment_03
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   47.4 44.9 49.9
Injection timing adjustment_04
Pump speed r/min   1450 1450 1450
Average injection quantity mm3/st.   48.4 46.4 50.4
Injection timing adjustment_05
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   47.5 46.5 48.5
Injection timing adjustment_06
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   42.4 40.4 44.4
Injection quantity adjustment
Pump speed r/min   2100 2100 2100
Average injection quantity mm3/st.   13.1 10.1 16.1
Difference in delivery mm3/st.   4
Basic   *
Injection quantity adjustment_02
Pump speed r/min   2300 2300 2300
Average injection quantity mm3/st.   5
Governor adjustment
Pump speed r/min   390 390 390
Average injection quantity mm3/st.   8 6 10
Difference in delivery mm3/st.   2
Basic   *
Governor adjustment_02
Pump speed r/min   390 390 390
Average injection quantity mm3/st.   8 6 10
Governor adjustment_03
Pump speed r/min   550 550 550
Average injection quantity mm3/st.   3
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   95 75 115
Basic   *
Speed control lever angle
Pump speed r/min   390 390 390
Average injection quantity mm3/st.   0 0 0
Remarks
Magnet OFF
 
0000000901
Pump speed r/min   1600 1600 1600
Overflow quantity with S/T OFF cm3/min   531 402 660
Stop lever angle
Pump speed r/min   1600 1600 1600
Pressure kPa   539.5 520 559
Pressure kgf/cm2   5.5 5.3 5.7
Basic   *
Stop lever angle_02
Pump speed r/min   1000 1000 1000
Pressure kPa   313.5 284 343
Pressure kgf/cm2   3.2 2.9 3.5
Stop lever angle_03
Pump speed r/min   1600 1600 1600
Pressure kPa   539.5 520 559
Pressure kgf/cm2   5.5 5.3 5.7
Stop lever angle_04
Pump speed r/min   1900 1900 1900
Pressure kPa   627.5 598 657
Pressure kgf/cm2   6.4 6.1 6.7
0000001101
Pump speed r/min   1600 1600 1600
Timer stroke mm   1.9 1.7 2.1
Basic   *
_02
Pump speed r/min   790 690 890
Timer stroke with S/T ON mm   0.5 0.5 0.5
_03
Pump speed r/min   1490 1440 1540
Timer stroke with S/T OFF mm   0.5 0.5 0.5
_04
Pump speed r/min   1600 1600 1600
Timer stroke with S/T OFF mm   1.9 1.6 2.2
_05
Pump speed r/min   1900 1900 1900
Timer stroke with S/T OFF mm   5.7 5.3 6.1
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
Timing setting
K dimension mm   2.8 2.7 2.9
KF dimension mm   5 4.9 5.1
MS dimension mm   1 0.9 1.1
Pre-stroke mm   0.45 0.43 0.47
Control lever angle alpha deg.   18 14 22
Control lever angle beta deg.   35 30 40

Test data Ex:

0000001801 V-FICD ADJUSTMENT

Test data 104741-1010
Adjustment of the V-FICD 1. Adjust the actuator rod to obtain S1. 2. Apply negative pressure P1 to the actuator and confirm the full stroke.
----------
S1=1+1mm P1=-53.3kPa(-400mmHg)
----------
S1=1+1mm

0000001901 TIMER STROKE

Timer adjustment Assemble the timer's measuring device on the low pressure side and measure timer advance. Select one of the 6 timer springs. It is necessary to install at least 1 shim (0.6 mm) on either side. Maximum is L1 mm on piston side and L2 mm on cover side. Do not exceed. Use pipe corresponding to 146606-3920.
----------
L1=3mm L2=3.8mm
----------




Have questions with 104741-1010?





Group cross 104741-1010 ZEXEL

Isuzu 

 
8941337570 
INJECTION-PUMP ASSEMBLY
4JB1B
 
8941337571 
INJECTION-PUMP ASSEMBLY
4JB1B
104741-1010  

104741-1130 
 
8941532800 
INJECTION-PUMP ASSEMBLY
4JB1B
 
8941337560 
INJECTION-PUMP ASSEMBLY
4JB1A
 
8941337561 
INJECTION-PUMP ASSEMBLY
4JB1A
 
8941531940 
INJECTION-PUMP ASSEMBLY
4JB1A
 
8941337550 
INJECTION-PUMP ASSEMBLY
4JA1
 
8941337551 
INJECTION-PUMP ASSEMBLY
4JA1
9 460 613 412 
8941531950 
INJECTION-PUMP ASSEMBLY
4JA1
 
8941397390 
INJECTION-PUMP ASSEMBLY
4JB1BG
 
 
INJECTION-PUMP ASSEMBLY
4JB1BG
 
8941397391 
INJECTION-PUMP ASSEMBLY
4JB1-BG
9 460 610 409 
8941397392 
INJECTION-PUMP ASSEMBLY
4JB1BG
 
8941397410 
INJECTION-PUMP ASSEMBLY
4JA1AG
 
 
INJECTION-PUMP ASSEMBLY
4JA1AG
 
8941397411 
INJECTION-PUMP ASSEMBLY
4JA1-AG
9 460 610 323 
8941397412 
INJECTION-PUMP ASSEMBLY
4JA1AG
Back to top