104740-4670 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047404670 1670010g01

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104740-4670 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104740-4670 1047404670

NISSAN-DIESEL 1670010G01 1670010g01

Cross reference number

ZEXEL 104740-4670 1047404670

NISSAN-DIESEL 1670010G01 1670010g01

Zexel num

Bosch num

Firm num

Name

104740-4670
104740-4672

1670010G01 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
SD25 *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 37.6 37.1 38.1

Difference in delivery mm3/st. 3

Basic *

Oil temperature degC 50 48 52

Injection timing adjustment_02

Pump speed r/min 600 600 600

Average injection quantity mm3/st. 34.7 32.7 36.7

Oil temperature degC 50 48 52

Injection timing adjustment_03

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 37.6 36.6 38.6

Difference in delivery mm3/st. 3.5

Oil temperature degC 50 48 52

Injection timing adjustment_04

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 35.1 33 37.2

Oil temperature degC 52 50 54

Injection quantity adjustment

Pump speed r/min 2350 2350 2350

Average injection quantity mm3/st. 14.6 11.6 17.6

Basic *

Oil temperature degC 52 50 54

Injection quantity adjustment_02

Pump speed r/min 2350 2350 2350

Average injection quantity mm3/st. 14.6 11.1 18.1

Oil temperature degC 52 50 54

Injection quantity adjustment_03

Pump speed r/min 2450 2450 2450

Average injection quantity mm3/st. 5

Oil temperature degC 55 52 58

Governor adjustment

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 6.5 4.5 8.5

Difference in delivery mm3/st. 2

Oil temperature degC 48 46 50

Governor adjustment_02

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 6.5 4 9

Difference in delivery mm3/st. 2.5

Oil temperature degC 48 46 50

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 60 45 80

Basic *

Oil temperature degC 48 46 50

Remarks
Full

Timer adjustment_02

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 60 45 80

Oil temperature degC 48 46 50

Remarks
Full

Speed control lever angle

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 0 0 0

Oil temperature degC 48 46 50

Remarks
Magnet OFF at idling position

0000000901

Pump speed r/min 1000 1000 1000

Overflow quantity cm3/min 380 250 510

Oil temperature degC 50 48 52

Stop lever angle

Pump speed r/min 1000 1000 1000

Pressure kPa 412 383 441

Pressure kgf/cm2 4.2 3.9 4.5

Basic *

Oil temperature degC 50 48 52

Stop lever angle_02

Pump speed r/min 1000 1000 1000

Pressure kPa 412 373 451

Pressure kgf/cm2 4.2 3.8 4.6

Oil temperature degC 50 48 52

Stop lever angle_03

Pump speed r/min 2100 2100 2100

Pressure kPa 677 638 716

Pressure kgf/cm2 6.9 6.5 7.3

Oil temperature degC 52 50 54

0000001101

Pump speed r/min 1000 1000 1000

Timer stroke mm 1.7 1.5 1.9

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1000 1000 1000

Timer stroke mm 1.7 1.3 2.1

Oil temperature degC 50 48 52

_03

Pump speed r/min 1400 1400 1400

Timer stroke mm 3.3 2.7 3.9

Oil temperature degC 50 48 52

_04

Pump speed r/min 2100 2100 2100

Timer stroke mm 6.2 5.6 6.8

Oil temperature degC 52 50 54

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001501

Pump speed r/min 1000 1000 1000

Height m 2000 2000 2000

Atmospheric pressure difference kPa -21.9 -23.2 -20.6

Atmospheric pressure difference mmHg -164 -174 -154

Average injection quantity mm3/st. 32 30.5 33.5

Decrease qty mm3/st. 5.6 5.6 5.6

Decrease rate % 15 15 15

Basic *

Oil temperature degC 50 48 52

_02

Pump speed r/min 1000 1000 1000

Height m 0 0 0

Atmospheric pressure difference kPa 0 0 0

Atmospheric pressure difference mmHg 0 0 0

Average injection quantity mm3/st. 37.6 36.6 38.6

Oil temperature degC 50 48 52

_03

Pump speed r/min 1000 1000 1000

Height m 2000 2000 2000

Atmospheric pressure difference kPa -21.9 -23.2 -20.6

Atmospheric pressure difference mmHg -164 -174 -154

Average injection quantity mm3/st. 32 30 34

Oil temperature degC 50 48 52

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.75 5.65 5.85

MS dimension mm 1.2 1.1 1.3

Pre-stroke mm 0.28 0.26 0.3

Control lever angle alpha deg. 25 21 29

Control lever angle beta deg. 42 37 47

Test data Ex:

0000001801 W-CSD ADJUSTMENT

Adjustment of the W-CSD 1. Adjustment of the advance angle of the timer (1)Determine timer advance from graph and formula. (2)(1) Adjust with the screw (A) so that the timer advance angle determined in the item (1) is obtained. 2. Setting the intermediate lever position (1)Insert a block gauge L between the idling set screw (G) and the control lever (F). (2)Align the intermediate lever (D) with the aligning line (I) and position it perpendicularly [perpendicular to (J) intermediate lever]. Adjust screw (E) so that it contacts control lever (F) and fix using the nut. 3. W-CSD lever adjustment (1)Insert a block gauge L+-0.05(mm) determined from the graph between the idle set screw (G) and the control lever (F). (2)Fix screw (B) so that the W-CSD lever (C)'s roller contacts the intermediate lever (D). (3)The temperature of the wax at adjustment must not exceed a. X:Temperature t (deg C) Y1:Timer lift (mm) Y2:Control lever L dimension (mm; control lever position) K:Water temperature (degC) M:Starting timer stroke (mm) N:Fast idle lever angle (deg)(mm) O:Standard point
----------
L=1.9+-0.05mm a=30degC
----------
L=1.9+-0.05mm K1=50+-0.5degC K2=20+-0.5degC K3=-10+-0.5degC M1=0mm M2=0.55+-0.2mm M3=1.65mm N1=0deg N2=3+-0.5deg N3=7.1deg N4=0mm N5=1.9+-0.3mm N6=4.5mm