Rating:
Information injection-pump assembly
BOSCH
9 460 613 585
9460613585
ZEXEL
104740-3000
1047403000
Components :
0. | INJECTION-PUMP ASSEMBLY | 104740-3000 |
1. | _ | |
2. | FUEL INJECTION PUMP | 104640-3000 |
3. | NUMBER PLATE | 146632-2900 |
4. | _ | 146672-0120 |
5. | CAPSULE | |
6. | ADJUSTING DEVICE | |
7. | NOZZLE AND HOLDER ASSY | 105141-2080 |
8. | Nozzle and Holder | MD050590 |
9. | Open Pre:MPa(Kqf/cm2) | 11.8{120} |
10. | NOZZLE-HOLDER | 105071-1300 |
11. | NOZZLE | 105000-1800 |
Scheme ###:
1/6. | [1] | 146601-0000 | PACKING RING |
1/9. | [1] | 146614-1200 | ADAPTOR |
6. | [1] | 146100-0020 | SUPPLY PUMP |
9. | [1] | 146103-0000 | COVER |
10. | [2] | 139104-0000 | FLAT-HEAD SCREW |
12. | [1] | 146200-0020 | DRIVE SHAFT |
12/1. | [1] | 146200-0000 | DRIVE SHAFT |
12/2. | [1] | 146201-0000 | WOODRUFF KEY |
12/3. | [2] | 146202-0100 | DAMPER |
12/4. | [1] | 146203-0000 | TOOTHED GEAR |
17. | [1] | 146204-0000 | PLAIN WASHER |
20. | [1] | 146210-0220 | ROLLER SET |
24. | [1] | 146303-0000 | BEARING PIN |
25. | [1] | 146304-0000 | BEARING PIN |
26. | [1] | 146305-0000 | CLAMPING BAND |
27. | [1] | 146205-0000 | SLOTTED WASHER |
29. | [1] | 146220-0020 | CAM PLATE |
30. | [1] | 146600-0800 | O-RING |
31. | [1] | 146300-1400 | PUMP PLUNGER |
32. | [1] | 146301-0000 | SLIDING PIECE |
33. | [1] | 146603-0700 | SHIM D17.5&7.5T0.60 |
34. | [1] | 146302-1000 | COMPRESSION SPRING K=1.90KG/MM |
35/1. | [0] | 146603-0700 | SHIM D17.5&7.5T0.60 |
35/1. | [0] | 146603-0800 | SHIM D17.5&7.5T0.70 |
35/1. | [0] | 146603-0900 | SHIM D17.5&7.5T0.90 |
35/1. | [0] | 146603-1000 | SHIM D17.5&7.5T1.00 |
35/1. | [0] | 146603-1100 | SHIM D17.5&7.5T1.20 |
35/1. | [0] | 146603-3600 | SHIM D17.5&7.5T2.40 |
36. | [1] | 146600-0800 | O-RING |
37. | [1] | 146310-0000 | COVER |
38. | [2] | 146620-5000 | BLEEDER SCREW |
39. | [1] | 146310-0100 | COVER |
40. | [2] | 146620-5000 | BLEEDER SCREW |
43. | [1] | 146230-0000 | SHIM |
44. | [1] | 146230-0100 | PLAIN WASHER |
45. | [1] | 146231-0001 | SLOTTED WASHER |
47. | [2] | 146233-0000 | SLOTTED WASHER |
48/1. | [1] | 146603-0000 | SHIM D17.0&5.2T0.50 |
48/1. | [1] | 146603-0100 | SHIM D17.0&5.2T0.80 |
48/1. | [1] | 146603-0200 | SHIM D17.0&5.2T1.00 |
48/1. | [1] | 146603-0300 | SHIM D17.0&5.2T1.20 |
48/1. | [1] | 146603-0400 | SHIM D17.0&5.2T1.50 |
48/1. | [1] | 146603-0500 | SHIM D17.0&5.2T1.80 |
48/1. | [1] | 146603-0600 | SHIM D17.0&5.2T2.00 |
48/1. | [1] | 146690-1400 | SHIM D17&5.2T0.9 |
48/1. | [1] | 146690-1500 | SHIM D17&5.2T1.1 |
48/1. | [1] | 146690-1600 | SHIM D17&5.2T1.3 |
48/1. | [1] | 146690-1700 | SHIM D17&5.2T1.4 |
48/1. | [1] | 146690-1800 | SHIM D17&5.2T1.6 |
48/1. | [1] | 146690-1900 | SHIM D17&5.2T1.7 |
48/1. | [1] | 146690-5800 | SHIM D17&5.2T2.1 |
48/1. | [1] | 146690-5900 | SHIM D17&5.2T2.2 |
48/1. | [1] | 146690-6000 | SHIM D17&5.2T2.3 |
48/1. | [1] | 146690-6100 | SHIM D17&5.2T2.4 |
48/1. | [1] | 146690-6200 | SHIM D17&5.2T2.5 |
48/1. | [1] | 146690-6300 | SHIM D17&5.2T2.6 |
48/1. | [1] | 146690-6400 | SHIM D17&5.2T2.7 |
48/1. | [1] | 146690-6500 | SHIM D17&5.2T2.8 |
48/1. | [1] | 146690-6600 | SHIM D17&5.2T2.9 |
48/1. | [1] | 146690-6700 | SHIM D17&5.2T3.0 |
48/1. | [1] | 146690-6800 | SHIM D17&5.2T3.1 |
48/1. | [1] | 146690-6900 | SHIM D17&5.2T3.2 |
48/1. | [1] | 146690-7000 | SHIM D17&5.2T3.3 |
48/1. | [1] | 146690-7100 | SHIM D17&5.2T3.4 |
48/1. | [1] | 146690-7200 | SHIM D17&5.2T0.4 |
48/1. | [1] | 146690-7300 | SHIM D17&5.2T0.6 |
48/1. | [1] | 146690-7400 | SHIM D17&5.2T0.7 |
48/1. | [1] | 146690-7500 | SHIM D17&5.2T1.9 |
48/1. | [1] | 146690-7800 | SHIM D17&5.2T0.2 |
49. | [2] | 146234-0020 | GUIDE PIN |
50. | [1] | 146404-0720 | HYDRAULIC HEAD |
50. | [1] | 146404-0720 | HYDRAULIC HEAD |
50. | [1] | 146404-0720 | HYDRAULIC HEAD |
51. | [1] | 146600-0000 | O-RING |
52/1. | [1] | 146420-0000 | SHIM D9.5&3.0T1.90 |
52/1. | [1] | 146420-0100 | SHIM D9.5&3.0T1.92 |
52/1. | [1] | 146420-0200 | SHIM D9.5&3.0T1.94 |
52/1. | [1] | 146420-0300 | SHIM D9.5&3.0T1.96 |
52/1. | [1] | 146420-0400 | SHIM D9.5&3.0T1.98 |
52/1. | [1] | 146420-0500 | SHIM D9.5&3.0T2.00 |
52/1. | [1] | 146420-0600 | SHIM D9.5&3.0T2.02 |
52/1. | [1] | 146420-0700 | SHIM D9.5&3.0T2.04 |
52/1. | [1] | 146420-0800 | SHIM D9.5&3.0T2.06 |
52/1. | [1] | 146420-0900 | SHIM D9.5&3.0T2.08 |
52/1. | [1] | 146420-1000 | SHIM D9.5&3.0T2.10 |
52/1. | [1] | 146420-1100 | SHIM D9.5&3.0T2.12 |
52/1. | [1] | 146420-1200 | SHIM D9.5&3.0T2.14 |
52/1. | [1] | 146420-1300 | SHIM D9.5&3.0T2.16 |
52/1. | [1] | 146420-1400 | SHIM D9.5&3.0T2.18 |
52/1. | [1] | 146420-1500 | SHIM D9.5&3.0T2.20 |
52/1. | [1] | 146420-1600 | SHIM D9.5&3.0T2.22 |
52/1. | [1] | 146420-1700 | SHIM D9.5&3.0T2.24 |
52/1. | [1] | 146420-1800 | SHIM D9.5&3.0T2.26 |
52/1. | [1] | 146420-1900 | SHIM D9.5&3.0T2.28 |
52/1. | [1] | 146420-2000 | SHIM D9.5&3.0T2.30 |
52/1. | [1] | 146420-2100 | SHIM D9.5&3.0T2.32 |
52/1. | [1] | 146420-2200 | SHIM D9.5&3.0T2.34 |
52/1. | [1] | 146420-2300 | SHIM D9.5&3.0T2.36 |
52/1. | [1] | 146420-2400 | SHIM D9.5&3.0T2.38 |
52/1. | [1] | 146420-2500 | SHIM D9.5&3.0T2.40 |
52/1. | [1] | 146420-2600 | SHIM D9.5&3.0T2.42 |
52/1. | [1] | 146420-2700 | SHIM D9.5&3.0T2.44 |
52/1. | [1] | 146420-2800 | SHIM D9.5&3.0T2.46 |
52/1. | [1] | 146420-2900 | SHIM D9.5&3.0T2.48 |
52/1. | [1] | 146420-3000 | SHIM D9.5&3.0T2.50 |
52/1. | [1] | 146420-3100 | SHIM D9.5&3.0T2.52 |
52/1. | [1] | 146420-3200 | SHIM D9.5&3.0T2.54 |
52/1. | [1] | 146420-3300 | SHIM D9.5&3.0T2.56 |
52/1. | [1] | 146420-3400 | SHIM D9.5&3.0T2.58 |
52/1. | [1] | 146420-3500 | SHIM D9.5&3.0T2.60 |
52/1. | [1] | 146420-3600 | SHIM D9.5&3.0T2.62 |
52/1. | [1] | 146420-3700 | SHIM D9.5&3.0T2.64 |
52/1. | [1] | 146420-3800 | SHIM D9.5&3.0T2.66 |
52/1. | [1] | 146420-3900 | SHIM D9.5&3.0T2.68 |
52/1. | [1] | 146420-4000 | SHIM D9.5&3.0T2.70 |
52/1. | [1] | 146420-4100 | SHIM D9.5&3.0T2.72 |
52/1. | [1] | 146420-4200 | SHIM D9.5&3.0T2.74 |
52/1. | [1] | 146420-4300 | SHIM D9.5&3.0T2.76 |
52/1. | [1] | 146420-4400 | SHIM D9.5&3.0T2.78 |
52/1. | [1] | 146420-4500 | SHIM D9.5&3.0T2.80 |
52/1. | [1] | 146420-4600 | SHIM D9.5&3.0T2.82 |
52/1. | [1] | 146420-4700 | SHIM D9.5&3.0T2.84 |
52/1. | [1] | 146420-4800 | SHIM D9.5&3.0T2.86 |
52/1. | [1] | 146420-4900 | SHIM D9.5&3.0T2.88 |
52/1. | [1] | 146420-5000 | SHIM D9.5&3.0T2.90 |
52/1. | [1] | 146420-5100 | SHIM D9.5&3.0T1.74 |
52/1. | [1] | 146420-5200 | SHIM D9.5&3.0T1.76 |
52/1. | [1] | 146420-5300 | SHIM D9.5&3.0T1.78 |
52/1. | [1] | 146420-5400 | SHIM D9.5&3.0T1.80 |
52/1. | [1] | 146420-5500 | SHIM D9.5&3.0T1.82 |
52/1. | [1] | 146420-5600 | SHIM D9.5&3.0T1.84 |
52/1. | [1] | 146420-5700 | SHIM D9.5&3.0T1.86 |
52/1. | [1] | 146420-5800 | SHIM D9.5&3.0T1.88 |
54. | [4] | 146433-0100 | GASKET D12&6.4T1.00 |
55. | [4] | 146430-0120 | DELIVERY-VALVE ASSEMBLY |
56. | [4] | 146432-0000 | COMPRESSION SPRING |
58. | [4] | 146440-0320 | FITTING |
60. | [4] | 139106-0100 | FLAT-HEAD SCREW |
66. | [1] | 146600-0100 | O-RING |
67. | [1] | 146502-0520 | GOVERNOR COVER |
67/1. | [1] | 146505-1820 | GOVERNOR COVER |
67/1. | [1] | 146505-1820 | GOVERNOR COVER |
67/1. | [1] | 146505-1820 | GOVERNOR COVER |
67/13. | [1] | 146621-1700 | UNION NUT |
67/14. | [1] | 146621-1800 | UNION NUT |
67/15. | [1] | 146526-3400 | BLEEDER SCREW |
67/16. | [1] | 146526-2900 | BLEEDER SCREW |
67/78. | [1] | 146600-4400 | SEAL RING |
67/200. | [1] | 139308-0300 | PLAIN WASHER |
67/201. | [1] | 146545-0300 | THREADED PIN L53.00 |
67/201B. | [1] | 146545-0400 | THREADED PIN L55.00 |
67/201C. | [1] | 146545-0500 | THREADED PIN L57.00 |
67/202. | [1] | 139208-0100 | UNION NUT |
67/203. | [1] | 146600-1200 | O-RING |
68. | [1] | 146510-0920 | CONTROL SHAFT |
69. | [1] | 139310-0200 | PLAIN WASHER |
72. | [1] | 146530-4320 | CONTROL LEVER |
72B. | [1] | 146530-4420 | CONTROL LEVER |
73. | [1] | 014110-6440 | LOCKING WASHER |
75. | [1] | 013020-6040 | UNION NUT M6P1H5 |
95. | [1] | 146551-0720 | FULCRUM LEVER |
104. | [2] | 146568-0000 | SLOTTED SPRING PIN |
105. | [2] | 026508-1140 | GASKET D11.4&8.2T1 |
106. | [2] | 146588-0500 | COILED SPRING |
107. | [1] | 146569-0100 | UNION NUT |
108. | [1] | 146570-0000 | GOVERNOR SHAFT |
109. | [1] | 146600-0400 | O-RING |
110/1. | [1] | 146571-0000 | SHIM D20.2&8.3T1.05 |
110/1. | [1] | 146571-0100 | SHIM D20.2&8.3T1.25 |
110/1. | [1] | 146571-0200 | SHIM D20.2&8.3T1.45 |
110/1. | [1] | 146571-0300 | SHIM D20.2&8.3T1.65 |
110/1. | [1] | 146571-0400 | SHIM D20.2&8.3T1.85 |
110/1. | [1] | 146571-0500 | SHIM D20.2&8.3T1.15 |
110/1. | [1] | 146571-0600 | SHIM D20.2&8.3T1.35 |
110/1. | [1] | 146571-0700 | SHIM D20.2&8.3T1.55 |
110/1. | [1] | 146571-0800 | SHIM D20.2&8.3T1.75 |
111. | [1] | 146602-0600 | PLAIN WASHER D20&8.4T1.40 |
112. | [1] | 146572-0020 | FLYWEIGHT ASSEMBLY |
114. | [1] | 146602-0500 | PLAIN WASHER D17&6.4T1.60 |
115. | [1] | 146575-0000 | SLIDING SLEEVE |
116. | [1] | 146576-0000 | SEALING CAP |
117/1. | [1] | 146577-0000 | PLUG L1.70 |
117/1. | [1] | 146577-0100 | PLUG L1.90 |
117/1. | [1] | 146577-0200 | PLUG L2.10 |
117/1. | [1] | 146577-0300 | PLUG L2.30 |
117/1. | [1] | 146577-0400 | PLUG L2.50 |
117/1. | [1] | 146577-0500 | PLUG L2.70 |
117/1. | [1] | 146577-0600 | PLUG L2.90 |
117/1. | [1] | 146577-0700 | PLUG L3.10 |
117/1. | [1] | 146577-0800 | PLUG L3.30 |
117/1. | [1] | 146577-0900 | PLUG L3.50 |
117/1. | [1] | 146577-1000 | PLUG L3.70 |
117/1. | [1] | 146577-1100 | PLUG L3.90 |
117/1. | [1] | 146577-1200 | PLUG L4.10 |
117/1. | [1] | 146577-1300 | PLUG L4.30 |
117/1. | [1] | 146577-1400 | PLUG L4.50 |
117/1. | [1] | 146577-1500 | PLUG L4.70 |
117/1. | [1] | 146577-1600 | PLUG L4.90 |
117/1. | [1] | 146577-1700 | PLUG L5.10 |
117/1. | [1] | 146577-5000 | PLUG L1.8 |
117/1. | [1] | 146577-5100 | PLUG L2.0 |
117/1. | [1] | 146577-5200 | PLUG L2.2 |
117/1. | [1] | 146577-5300 | PLUG L2.4 |
117/1. | [1] | 146577-5400 | PLUG L2.6 |
117/1. | [1] | 146577-5500 | PLUG L2.8 |
117/1. | [1] | 146577-5600 | PLUG L3.0 |
117/1. | [1] | 146577-5700 | PLUG L3.2 |
117/1. | [1] | 146577-5800 | PLUG L3.4 |
117/1. | [1] | 146577-5900 | PLUG L3.6 |
117/1. | [1] | 146577-6000 | PLUG L3.8 |
117/1. | [1] | 146577-6100 | PLUG L4.0 |
117/1. | [1] | 146577-6200 | PLUG L4.2 |
117/1. | [1] | 146577-6300 | PLUG L4.4 |
117/1. | [1] | 146577-6400 | PLUG L4.6 |
117/1. | [1] | 146577-6500 | PLUG L4.8 |
117/1. | [1] | 146577-6600 | PLUG L5.0 |
117/1. | [1] | 146877-0400 | PLUG |
117/1. | [1] | 146877-0500 | PLUG |
117/1. | [1] | 146877-0600 | PLUG |
117/1. | [1] | 146877-0700 | PLUG |
117/1. | [1] | 146877-4300 | PLUG |
117/1. | [1] | 146877-4400 | PLUG |
117/1. | [1] | 146877-4500 | PLUG |
117/1. | [1] | 146877-4600 | PLUG |
123. | [4] | 139106-0200 | FLAT-HEAD SCREW |
130. | [1] | 146421-0020 | CAPSULE |
130/2. | [1] | 026508-1140 | GASKET D11.4&8.2T1 |
130/3. | [1] | 146422-0000 | BLEEDER SCREW |
130/4. | [1] | 146600-0500 | O-RING |
133. | [1] | 146600-0600 | O-RING |
134. | [1] | 146600-0700 | O-RING |
135. | [1] | 146110-0220 | CONTROL VALVE |
135/5. | [1] | 146114-0000 | SPRING WASHER |
136. | [1] | 146650-0920 | PULLING ELECTROMAGNET |
137. | [2] | 029331-4010 | GASKET |
145. | [1] | 013020-5240 | UNION NUT M5P0.8H4 |
146. | [1] | 023500-5140 | PLAIN WASHER D10.0&5.3T1.00 |
200. | [1] | 146206-0100 | COILED SPRING |
219. | [1] | 146541-0000 | ANGLE PIECE |
220. | [1] | 146587-1500 | COILED SPRING |
222. | [2] | 139106-0400 | FLAT-HEAD SCREW M6P1.0H12 |
223. | [1] | 146670-0520 | SWITCH UNIT |
224. | [1] | 010006-1240 | BLEEDER SCREW M6P1L12 4T |
230. | [1] | 146613-2500 | BRACKET |
231. | [1] | 010006-1240 | BLEEDER SCREW M6P1L12 4T |
232. | [1] | 146659-0020 | CLAMPING BAND |
233. | [1] | 146658-0520 | WIRE |
234. | [1] | 139106-0500 | FLAT-HEAD SCREW M6P1.0H25 |
235. | [1] | 146660-0120 | BRACKET |
239. | [1] | 023500-5140 | PLAIN WASHER D10.0&5.3T1.00 |
240. | [1] | 146650-1220 | PULLING ELECTROMAGNET |
240/8. | [1] | 146600-1700 | O-RING |
243. | [1] | 013020-5240 | UNION NUT M5P0.8H4 |
245. | [2] | 026512-1840 | GASKET D17.9&12.2T1.50 |
245. | [2] | 026512-1840 | GASKET D17.9&12.2T1.50 |
246. | [1] | 027412-2440 | EYE BOLT |
247. | [1] | 146610-4320 | PIPE |
275. | [1] | 146612-0900 | BRACKET |
276. | [2] | 010010-1640 | BLEEDER SCREW M10P1.5L16 4T |
277. | [2] | 014111-0440 | LOCKING WASHER |
280. | [1] | 146360-0020 | START ADVANCE ASSY |
281. | [1] | 146600-0800 | O-RING |
800S. | [1] | 146009-0220 | PUMP HOUSING |
800S/1/6. | [1] | 146601-0000 | PACKING RING |
800S/1/9. | [1] | 146614-1200 | ADAPTOR |
804S. | [1] | 146232-0220 | COMPRESSION SPRING |
805S. | [1] | 146574-0120 | PARTS SET |
810S. | [1] | 146600-1120 | REPAIR SET |
903. | [1] | 146672-0120 | PULSE GENERATOR |
903/2. | [1] | 146600-1300 | O-RING &13W1.9 |
906. | [1] | 146632-2900 | NAMEPLATE |
907. | [1] | 025803-1610 | WOODRUFF KEY |
908. | [1] | 013021-2140 | UNION NUT M12P1.75H10 |
909. | [1] | 014111-2440 | LOCKING WASHER D21.5&12.2T3 |
Include in #2:
104740-3000
as INJECTION-PUMP ASSEMBLY
Cross reference number
BOSCH
9 460 613 585
9460613585
ZEXEL
104740-3000
1047403000
Zexel num
Bosch num
Firm num
Name
104740-3000
9 460 613 585
INJECTION-PUMP ASSEMBLY
* K
* K
Calibration Data:
Adjustment conditions
(Note)
For Japan: year/month/day (change sequence) 1980/12/01 (1)
For Japan: year/month/day (change sequence) 1980/12/01 (1)
Test oil
1404 Test oil ISO4113orSAEJ967d
1404 Test oil ISO4113orSAEJ967d
Test oil temperature
degC
45
45
50
Nozzle
105000-2010
Bosch type code
NP-DN12SD12TT
Nozzle holder
105780-2080
Opening pressure
MPa
14.7
14.7
15.19
Opening pressure
kgf/cm2
150
150
155
Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840
Inside diameter - outside diameter - length (mm) mm 2-6-840
Transfer pump pressure
kPa
20
20
20
Transfer pump pressure
kgf/cm2
0.2
0.2
0.2
Direction of rotation (viewed from drive side)
Right R
Right R
(Solenoid timer adjustment condition)
ON ON
ON ON
Injection timing adjustment
Pump speed
r/min
1750
1750
1750
Average injection quantity
mm3/st.
34.8
34.3
35.3
Difference in delivery
mm3/st.
2
Basic
*
Injection timing adjustment_02
Pump speed
r/min
2350
2350
2350
Average injection quantity
mm3/st.
9.8
5.7
13.9
Injection timing adjustment_03
Pump speed
r/min
2100
2100
2100
Average injection quantity
mm3/st.
33.35
31.2
35.5
Injection timing adjustment_04
Pump speed
r/min
1750
1750
1750
Average injection quantity
mm3/st.
34.75
33.7
35.8
Injection timing adjustment_05
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
36.45
34.4
38.5
Injection timing adjustment_06
Pump speed
r/min
1750
1750
1750
Average injection quantity
mm3/st.
33.9
33.4
34.4
Difference in delivery
mm3/st.
2
Basic
*
Remarks
For Japan
For Japan
Injection timing adjustment_07
Pump speed
r/min
2350
2350
2350
Average injection quantity
mm3/st.
9.6
5.6
13.6
Remarks
For Japan
For Japan
Injection timing adjustment_08
Pump speed
r/min
2100
2100
2100
Average injection quantity
mm3/st.
32.5
30.4
34.6
Remarks
For Japan
For Japan
Injection timing adjustment_09
Pump speed
r/min
1750
1750
1750
Average injection quantity
mm3/st.
33.9
32.9
34.9
Remarks
For Japan
For Japan
Injection timing adjustment_10
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
36
33.5
38.5
Remarks
For Japan
For Japan
Injection quantity adjustment
Pump speed
r/min
2350
2350
2350
Average injection quantity
mm3/st.
9.85
6.8
12.9
Basic
*
Injection quantity adjustment_02
Pump speed
r/min
2500
2500
2500
Average injection quantity
mm3/st.
5
Injection quantity adjustment_03
Pump speed
r/min
2350
2350
2350
Average injection quantity
mm3/st.
9.6
6.6
12.6
Basic
*
Remarks
For Japan
For Japan
Injection quantity adjustment_04
Pump speed
r/min
2500
2500
2500
Average injection quantity
mm3/st.
5
Remarks
For Japan
For Japan
Governor adjustment
Pump speed
r/min
375
375
375
Average injection quantity
mm3/st.
8.65
6.6
10.7
Difference in delivery
mm3/st.
2.5
Basic
*
Governor adjustment_02
Pump speed
r/min
375
375
375
Average injection quantity
mm3/st.
8.65
6.6
10.7
Governor adjustment_03
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
3.1
Governor adjustment_04
Pump speed
r/min
375
375
375
Average injection quantity
mm3/st.
8.4
6.4
10.4
Difference in delivery
mm3/st.
2.5
Basic
*
Remarks
For Japan
For Japan
Governor adjustment_05
Pump speed
r/min
375
375
375
Average injection quantity
mm3/st.
8.4
6.4
10.4
Remarks
For Japan
For Japan
Governor adjustment_06
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
3
Remarks
For Japan
For Japan
Boost compensator adjustment
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
21.05
14.9
27.2
Boost compensator adjustment_02
Pump speed
r/min
600
600
600
Average injection quantity
mm3/st.
20.5
14.5
26.5
Remarks
For Japan
For Japan
Timer adjustment
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
75.5
68
83
Basic
*
Timer adjustment_02
Pump speed
r/min
100
100
100
Average injection quantity
mm3/st.
73.5
66
81
Basic
*
Remarks
For Japan
For Japan
Speed control lever angle
Pump speed
r/min
375
375
375
Average injection quantity
mm3/st.
0
0
0
Remarks
Magnet OFF
Magnet OFF
Speed control lever angle_02
Pump speed
r/min
375
375
375
Average injection quantity
mm3/st.
0
0
0
Remarks
For Japan: Magnet OFF
For Japan: Magnet OFF
0000000901
Pump speed
r/min
1250
1250
1250
Overflow quantity
cm3/min
699
540
858
_02
Pump speed
r/min
1250
1250
1250
Overflow quantity
cm3/min
729
570
888
Remarks
For Japan
For Japan
Stop lever angle
Pump speed
r/min
1250
1250
1250
Pressure
kPa
480.5
451
510
Pressure
kgf/cm2
4.9
4.6
5.2
Basic
*
Stop lever angle_02
Pump speed
r/min
600
600
600
Pressure
kPa
323.5
294
353
Pressure
kgf/cm2
3.3
3
3.6
Stop lever angle_03
Pump speed
r/min
1250
1250
1250
Pressure
kPa
480.5
451
510
Pressure
kgf/cm2
4.9
4.6
5.2
Stop lever angle_04
Pump speed
r/min
1950
1950
1950
Pressure
kPa
647.5
618
677
Pressure
kgf/cm2
6.6
6.3
6.9
Stop lever angle_05
Pump speed
r/min
1250
1250
1250
Pressure
kPa
470.5
441
500
Pressure
kgf/cm2
4.8
4.5
5.1
Basic
*
Remarks
For Japan
For Japan
Stop lever angle_06
Pump speed
r/min
600
600
600
Pressure
kPa
313.5
284
343
Pressure
kgf/cm2
3.2
2.9
3.5
Remarks
For Japan
For Japan
Stop lever angle_07
Pump speed
r/min
1250
1250
1250
Pressure
kPa
470.5
441
500
Pressure
kgf/cm2
4.8
4.5
5.1
Remarks
For Japan
For Japan
Stop lever angle_08
Pump speed
r/min
1950
1950
1950
Pressure
kPa
637.5
608
667
Pressure
kgf/cm2
6.5
6.2
6.8
Remarks
For Japan
For Japan
0000001101
Pump speed
r/min
1250
1250
1250
Timer stroke
mm
5.8
5.6
6
Basic
*
_02
Pump speed
r/min
600
600
600
Timer stroke with S/T ON
mm
1.75
1.1
2.4
_03
Pump speed
r/min
1250
1250
1250
Timer stroke with S/T ON
mm
5.8
5.6
6
Timer stroke with S/T OFF
mm
2.7
2.1
3.3
_04
Pump speed
r/min
1950
1950
1950
Timer stroke with S/T ON
mm
10.05
9.4
10.7
Timer stroke with S/T OFF
mm
6.65
6
7.3
_05
Pump speed
r/min
1250
1250
1250
Timer stroke
mm
5.7
5.5
5.9
Basic
*
Remarks
For Japan
For Japan
_06
Pump speed
r/min
600
600
600
Timer stroke with S/T ON
mm
1.7
1.1
2.3
Remarks
For Japan
For Japan
_07
Pump speed
r/min
1250
1250
1250
Timer stroke with S/T ON
mm
5.7
5.5
5.9
Timer stroke with S/T OFF
mm
2.6
2
3.2
Remarks
For Japan
For Japan
_08
Pump speed
r/min
1950
1950
1950
Timer stroke with S/T ON
mm
9.8
9.2
10.4
Timer stroke with S/T OFF
mm
6.5
5.9
7.1
Remarks
For Japan
For Japan
0000001201
Max. applied voltage
V
8
8
8
Test voltage
V
13
12
14
Timing setting
K dimension
mm
3.3
3.2
3.4
KF dimension
mm
5.8
5.7
5.9
MS dimension
mm
1.4
1.3
1.5
Control lever angle alpha
deg.
59
55
63
Control lever angle beta
deg.
46
41
51
Control lever angle gamma
Partial lever position deg. 12 11.5 12.5
Partial lever position deg. 12 11.5 12.5
Test data Ex:
0000001801 ACCELERATOR SWITCH ADJ
Accelerator switch adjustment
1. Adjust the distance between the full stopper screw and the control lever to L1.
2. Adjust the accelerator switch installation position so that it switches ON.
----------
L1=5.2mm
----------
----------
L1=5.2mm
----------
0000001901 W-CSD ADJUSTMENT
Adjustment of the W-CSD
Adjust the timer stroke and the control lever position in accordance with the ambient temperature at adjustment using the graph.
Y1:Timer stroke
Y2:Control lever position
X:Temperature
A:Timer stroke
B:Lever position
----------
----------
----------
----------
Have questions with 104740-3000?
Group cross 104740-3000 ZEXEL
104740-3000
9 460 613 585
INJECTION-PUMP ASSEMBLY