104740-2374 ZEXEL 9 460 613 582 BOSCH INJECTION-PUMP ASSEMBLY 9460613582 1047402374


104740-2374 INJECTION-PUMP ASSEMBLY
Rating:
18
Buy INJECTION-PUMP ASSEMBLY 104740-2374 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 613 582 9460613582
ZEXEL 104740-2374 1047402374

Components :

0. INJECTION-PUMP ASSEMBLY 104740-2374
1. _
2. FUEL INJECTION PUMP 104640-2374
3. NUMBER PLATE 146913-7800
4. _ 146672-5920
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105141-2971
8. Nozzle and Holder 16600-1C310
9. Open Pre:MPa(Kqf/cm2) 12.7{130}
10. NOZZLE-HOLDER 105071-1361
11. NOZZLE 105000-2210

Scheme ###:

1/6. [1] 146601-0900 PACKING RING
6. [1] 146100-0320 SUPPLY PUMP
9. [1] 146103-0100 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0620 DRIVE SHAFT
12/1. [1] 146200-0000 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-2420 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2420 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146311-6420 PUMP PLUNGER
32. [1] 146301-0000 SLIDING PIECE
34. [1] 146312-3100 COMPRESSION SPRING
34B. [1] 146312-2500 COMPRESSION SPRING
35/1. [1] 146690-3200 SHIM D11.5&9.4T0.1
35/1. [1] 146690-3300 SHIM D11.5&9.4T0.2
35/1. [1] 146690-3400 SHIM D11.5&9.4T0.25
35/1. [1] 146690-3500 SHIM D11.5&9.4T1.0
35/1. [1] 146690-4100 SHIM D11.5&9.4T2
35/1. [1] 146690-4200 SHIM D11.5&9.4T0.5
35/1. [1] 146690-4300 SHIM D11.5&9.4T0.75
36. [1] 146600-0800 O-RING
37. [1] 146310-1600 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
41. [1] 146312-1900 COMPRESSION SPRING
42. [1] 146602-8500 PLAIN WASHER
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM D17&5.2T2.1
48/1. [1] 146690-5900 SHIM D17&5.2T2.2
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM D17&5.2T2.7
48/1. [1] 146690-6500 SHIM D17&5.2T2.8
48/1. [1] 146690-6600 SHIM D17&5.2T2.9
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM D17&5.2T3.4
48/1. [1] 146690-7200 SHIM D17&5.2T0.4
48/1. [1] 146690-7300 SHIM D17&5.2T0.6
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM D17&5.2T1.9
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0120 GUIDE PIN
50. [1] 146403-3620 HYDRAULIC HEAD
50. [1] 146403-3620 HYDRAULIC HEAD
50. [1] 146403-3620 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-4120 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0220 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146752-0520 MANIFOLD-PRESSURE COMP.
67/1. [1] 146508-6421 GOVERNOR COVER
67/4. [1] 139310-0200 PLAIN WASHER
67/6. [1] 014110-6440 LOCKING WASHER
67/8. [1] 146515-1820 LEVER SHAFT
67/9. [1] 146587-9400 COILED SPRING
67/10. [1] 146600-0200 O-RING
67/11. [1] 146602-0100 PLAIN WASHER D14&10.1T1.50
67/12. [1] 146540-4620 CONTROL LEVER
67/12B. [1] 146540-4720 CONTROL LEVER
67/13. [1] 139206-0100 UNION NUT
67/14. [1] 146621-1700 UNION NUT
67/15. [1] 146526-4200 BLEEDER SCREW
67/16. [1] 146526-3000 BLEEDER SCREW
67/25. [1] 013020-6040 UNION NUT M6P1H5
67/31. [1] 146710-0000 BUSHING
67/32. [1] 146711-0000 PLATE
67/33. [1] 139218-0400 UNION NUT
67/34. [1] 146712-0000 BEARING PIN
67/35. [1] 146621-0300 UNION NUT
67/36. [1] 146600-1400 O-RING
67/37. [1] 146710-0100 BUSHING
67/38. [1] 139506-0200 GASKET D8.9&6.8T1.00
67/39. [1] 146620-0300 CAPSULE
67/40. [1] 026512-1540 GASKET D15.4&12.2T1.50
67/41. [1] 146713-0400 ADJUSTING PIN
67/42. [2] 146714-0000 PLATE
67/43. [1] 146715-0000 DIAPHRAGM
67/44. [1] 139306-0100 LOCKING WASHER
67/45. [1] 013030-6040 UNION NUT M6P1H3.6
67/46. [1] 146716-0000 UNION NUT
67/47. [1] 146717-0300 COILED SPRING
67/48/1. [1] 146720-0000 SPACER BUSHING L3.7
67/48/1. [1] 146720-0100 SPACER BUSHING L3.9
67/48/1. [1] 146720-0200 SPACER BUSHING L4.1
67/48/1. [1] 146720-0300 SPACER BUSHING L4.3
67/48/1. [1] 146720-0400 SPACER BUSHING L4.5
67/48/1. [1] 146720-0500 SPACER BUSHING L4.7
67/48/1. [1] 146720-0600 SPACER BUSHING L4.9
67/48/1. [1] 146720-0700 SPACER BUSHING L5.1
67/48/1. [1] 146720-0800 SPACER BUSHING L5.3
67/48/1. [1] 146720-0900 SPACER BUSHING L2.7
67/48/1. [1] 146720-1000 SPACER BUSHING L2.9
67/48/1. [1] 146720-1100 SPACER BUSHING L3.1
67/48/1. [1] 146720-1200 SPACER BUSHING L3.3
67/48/1. [1] 146720-1300 SPACER BUSHING L3.5
67/48/1. [1] 146720-1400 SPACER BUSHING L2.8
67/48/1. [1] 146720-1500 SPACER BUSHING L3.0
67/48/1. [1] 146720-1600 SPACER BUSHING L3.2
67/48/1. [1] 146720-1700 SPACER BUSHING L3.4
67/48/1. [1] 146720-1800 SPACER BUSHING L3.6
67/48/1. [1] 146720-1900 SPACER BUSHING L3.8
67/48/1. [1] 146720-2000 SPACER BUSHING L4.0
67/48/1. [1] 146720-2100 SPACER BUSHING L4.2
67/48/1. [1] 146720-2200 SPACER BUSHING L4.4
67/48/1. [1] 146720-2300 SPACER BUSHING L4.6
67/48/1. [1] 146720-2400 SPACER BUSHING L4.8
67/48/1. [1] 146720-2500 SPACER BUSHING L5.0
67/48/1. [1] 146720-2600 SPACER BUSHING L5.2
67/48/1. [1] 146720-2700 SPACER BUSHING L5.4
67/48/1. [1] 146720-2800 SPACER BUSHING L5.5
67/48/1. [1] 146720-2900 SPACER BUSHING L5.6
67/48/1. [1] 146720-4500 SPACER BUSHING L1.8
67/48/1. [1] 146720-4600 SPACER BUSHING L1.9
67/48/1. [1] 146720-4700 SPACER BUSHING L2.0
67/48/1. [1] 146720-4800 SPACER BUSHING L2.1
67/48/1. [1] 146720-4900 SPACER BUSHING L2.2
67/48/1. [1] 146720-5000 SPACER BUSHING L2.3
67/48/1. [1] 146720-5100 SPACER BUSHING L2.4
67/48/1. [1] 146720-5200 SPACER BUSHING L2.5
67/48/1. [1] 146720-5300 SPACER BUSHING L2.6
67/48/1. [1] 146725-2500 SPACER BUSHING L5.7
67/48/1. [1] 146725-2600 SPACER BUSHING L5.8
67/48/1. [1] 146725-2700 SPACER BUSHING L5.9
67/48/1. [1] 146725-2800 SPACER BUSHING L6.0
67/48/1. [1] 146725-2900 SPACER BUSHING L6.1
67/48/1. [1] 146725-3000 SPACER BUSHING L6.2
67/48/1. [1] 146725-3100 SPACER BUSHING L6.3
67/48/1. [1] 146725-3200 SPACER BUSHING L6.4
67/48/1. [1] 146725-3300 SPACER BUSHING L6.5
67/48/1. [1] 146725-3400 SPACER BUSHING L6.6
67/48/1. [1] 146725-3500 SPACER BUSHING L6.7
67/48/1. [1] 146725-3600 SPACER BUSHING L6.8
67/48/1. [1] 146725-3700 SPACER BUSHING L6.9
67/48/1. [1] 146725-3800 SPACER BUSHING L7.0
67/48/1. [1] 146725-3900 SPACER BUSHING L7.1
67/48/1. [1] 146725-4000 SPACER BUSHING L7.2
67/48/1. [1] 146725-4100 SPACER BUSHING L7.3
67/48/1. [1] 146725-4200 SPACER BUSHING L7.4
67/48/1. [1] 146725-4300 SPACER BUSHING L7.5
67/49. [1] 146721-2920 COVER
67/54. [4] 139006-4600 BLEEDER SCREW
67/54. [4] 139006-4600 BLEEDER SCREW
67/56. [1] 146723-0020 CONTROL LEVER
67/57. [1] 146712-0100 BEARING PIN
67/58. [2] 146620-0600 CAPSULE
67/59. [2] 026506-1040 GASKET D9.9&6.2T1
67/60. [1] 146724-0020 AIR FILTER
67/78. [1] 146600-1000 SEAL RING
67/102. [1] 146929-1800 BRACKET
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3720 THREADED PIN
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146514-2420 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146538-1820 CONTROL LEVER
73. [1] 014110-6440 LOCKING WASHER
75. [1] 146621-2500 UNION NUT
95. [1] 146561-8820 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0620 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER D17&6.4T1.60
115. [1] 146875-5400 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
123. [4] 146620-0500 HEX-SOCKET-HEAD CAP SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-0220 OVER FLOW VALVE
137. [2] 139512-0200 GASKET D18.5&12.2T1.00
138. [1] 146665-4420 INLET UNION
159. [1] 146628-7220 PLATE
200. [1] 146206-0100 COILED SPRING
217. [1] 146541-2900 SLOTTED WASHER
218. [1] 146587-6400 COILED SPRING
219. [1] 146541-3000 BUSHING
220. [1] 146592-3000 COILED SPRING
221. [1] 146929-7120 BRACKET
222. [2] 139006-4600 BLEEDER SCREW
230. [1] 146929-6220 BRACKET
231. [1] 139006-4600 BLEEDER SCREW
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-0720 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 146621-1000 UNION NUT
245. [3] 139512-0200 GASKET D18.5&12.2T1.00
246. [1] 139812-0500 EYE BOLT
247. [1] 146665-4120 INLET UNION
248. [1] 146614-0200 SPACER BUSHING
251. [1] 146125-0101 FILTER
252. [1] 146125-0200 COILED SPRING
275. [1] 146929-6320 BRACKET
276. [2] 010010-1640 BLEEDER SCREW M10P1.5L16 4T
280. [1] 146361-0220 COVER
281. [1] 146600-0800 O-RING
282. [2] 010206-1440 HEX-SOCKET-HEAD CAP SCREW M6P1L14
309. [1] 020146-1270 BLEEDER SCREW
310. [1] 146683-4620 POTENTCIOMETER
329. [1] 146541-4900 PLAIN WASHER D20&10T0.5
347. [1] 146620-7500 BLEEDER SCREW
348. [1] 013020-6040 UNION NUT M6P1H5
800S. [1] 146018-1220 PUMP HOUSING
800S/1/6. [1] 146601-0900 PACKING RING
804S. [1] 146232-0720 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-1120 REPAIR SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
903. [1] 146672-5920 PULSE GENERATOR
903/2. [1] 146600-1300 O-RING &13W1.9
906. [1] 146913-7800 NAMEPLATE

Include in #2:

104740-2374 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 613 582 9460613582
ZEXEL 104740-2374 1047402374


Zexel num
Bosch num
Firm num
Name
104740-2374 
104740-2375 
9 460 613 582 
   
INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Pump speed r/min   900 900 900
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   31.8 31.3 32.3
Difference in delivery mm3/st.   2.5
Basic   *
Remarks
Full
 
Injection timing adjustment_02
Pump speed r/min   900 900 900
Boost pressure kPa   43.35 42 44.7
Boost pressure mmHg   325 315 335
Average injection quantity mm3/st.   45.1 44.6 45.6
Difference in delivery mm3/st.   2.5
Basic   *
Remarks
CBS
 
Injection timing adjustment_03
Pump speed r/min   2700 2700 2700
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   21.4 13.9 28.9
Injection timing adjustment_04
Pump speed r/min   2550 2550 2550
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   37.5 36 39
Injection timing adjustment_05
Pump speed r/min   2400 2400 2400
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   45.9 42.4 49.4
Injection timing adjustment_06
Pump speed r/min   2200 2200 2200
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   47.6 44.1 51.1
Injection timing adjustment_07
Pump speed r/min   1800 1800 1800
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   51.3 48.3 54.3
Injection timing adjustment_08
Pump speed r/min   1400 1400 1400
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   51.6 48.6 54.6
Injection timing adjustment_09
Pump speed r/min   900 900 900
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   31.8 30.8 32.8
Injection timing adjustment_10
Pump speed r/min   900 900 900
Boost pressure kPa   43.35 42 44.7
Boost pressure mmHg   325 315 335
Average injection quantity mm3/st.   45.1 44.1 46.1
Injection timing adjustment_11
Pump speed r/min   600 600 600
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   35.7 33.7 37.7
Injection quantity adjustment
Pump speed r/min   2550 2550 2550
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   37.5 36.5 38.5
Difference in delivery mm3/st.   5
Basic   *
Injection quantity adjustment_02
Pump speed r/min   2950 2950 2950
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Average injection quantity mm3/st.   6
Governor adjustment
Pump speed r/min   400 400 400
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   10.5 9.5 11.5
Difference in delivery mm3/st.   2
Basic   *
Governor adjustment_02
Pump speed r/min   800 800 800
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   5
Governor adjustment_03
Pump speed r/min   400 400 400
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   10.5 9 12
Boost compensator adjustment
Pump speed r/min   700 700 700
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   18.4 11.9 24.9
Timer adjustment
Pump speed r/min   100 100 100
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   65 60 70
Basic   *
Speed control lever angle
Pump speed r/min   400 400 400
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   0 0 0
Remarks
Magnet OFF
 
0000000901
Pump speed r/min   900 900 900
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Overflow quantity cm3/min   378 246 510
Stop lever angle
Pump speed r/min   900 900 900
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Pressure kPa   382.5 353 412
Pressure kgf/cm2   3.9 3.6 4.2
Basic   *
Stop lever angle_02
Pump speed r/min   600 600 600
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Pressure kPa   313.5 284 343
Pressure kgf/cm2   3.2 2.9 3.5
Stop lever angle_03
Pump speed r/min   900 900 900
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Pressure kPa   382.5 353 412
Pressure kgf/cm2   3.9 3.6 4.2
Stop lever angle_04
Pump speed r/min   1400 1400 1400
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Pressure kPa   490.5 461 520
Pressure kgf/cm2   5 4.7 5.3
Stop lever angle_05
Pump speed r/min   2200 2200 2200
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Pressure kPa   667 628 706
Pressure kgf/cm2   6.8 6.4 7.2
0000001101
Pump speed r/min   900 900 900
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Timer stroke mm   2.2 2 2.4
Basic   *
_02
Pump speed r/min   600 600 600
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Timer stroke mm   0.7
_03
Pump speed r/min   900 900 900
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Timer stroke mm   2.2 1.9 2.5
_04
Pump speed r/min   1400 1400 1400
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Timer stroke mm   5.1 4.6 5.6
_05
Pump speed r/min   1800 1800 1800
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Timer stroke mm   7.4 6.8 8
_06
Pump speed r/min   2200 2200 2200
Boost pressure kPa   66.65 65.3 68
Boost pressure mmHg   500 490 510
Timer stroke mm   8.1 7.6 8.6
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   900 900 900
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   25.9 25.4 26.4
Timer stroke variation dT mm   0.3 0.1 0.5
Basic   *
_02
Pump speed r/min   900 900 900
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   25.9 24.9 26.9
Timer stroke variation dT mm   0.35 0 0.7
_03
Pump speed r/min   900 900 900
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Average injection quantity mm3/st.   17.5 16 19
Timer stroke variation dT mm   0.8 0.3 1.3
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   6.29 6.19 6.39
MS dimension mm   0.9 0.8 1
BCS stroke mm   4.6 4.4 4.8
Control lever angle alpha deg.   25 23 27
Control lever angle beta deg.   42 37 47
Control lever angle gamma deg.   9 8.5 9.5

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104740-2374
Adjustment of the potentiometer At pump speed N1 and a control lever position a from idle (gap L1), measure the injection quantity and convert it to a voltage value. Then adjust the potentiometer. Voltage conversion formula: V+-0.03 = 0.04163Q+2.0037 A:Potentiometer performance standards C:Position of the control lever C1:Idle C2:Full speed V:Potentiometer voltage E:Standards for the potentiometer's ON - OFF switch B:Conversion point B1:OFF-->ON B2:OFF-->ON D:Lever opening (from idle) Vi:Applied voltage F:Connecting diagram for the potentiometer G:Output when (2) and (3) connected. H:When (4) or (6) connected: switch OFF to ON. I:When (4) or (5) connected: switch ON to OFF. J:Output
----------
N1=700r/min a=9deg L1=5.95mm
----------
V1=1.27+-0.4V V2=8.27+-1.47V Vi=10V D1=6+-3deg D2=22.5++deg

0000001901 CONTROL LEVER ANGLE

Test data 104740-2374
Control lever angle measurement 1. Measure the dimension L from the lever tip to the flange face (A). 2. Measure the lever angle from the pin hole R (plate). (B): lever angle measuring hole Alpha = a beta: b
----------
R=61.5mm L=25.7~29.7mm
----------
R=61.5mm L=25.7~29.7mm

0000002001 STARTING I/Q ADJUSTMENT

Test data 104740-2374
Starting injection quantity adjustment Adjust adjusting bolt so that the starting injection quantity is within the standard. Fix using nut. (A): Lock nut. (B): Stopping lever (C): Adjustment bolt
----------

----------
L=5~10mm

0000002101 M-CSD ADJUSTMENT

Test data 104740-2374
M-CSD adjustment 1. Fixing intermediate lever screw (A) [roller (E) must not contact intermediate lever (D)] (1)Hold the control lever (C) in the idle position. (2)Insert a block gauge (thickness gauge) L1 between the intermediate lever (D) and the bracket (K). Adjust screw (A) so that the distance between screw A and the control lever to L2 and fix using the nut (B). 2. Fixing the M-CSD stopper (I) Pull the CSD lever F in the direction X until it contacts the stopper I and tighten the socket head bolt J when the timer stroke is L3. 3. Screw (G) adjustment (1)Adjust using the screw G so that the roller E contacts the intermediate lever D, then fix using the nut H. (2)Pull the CSD lever F in the direction X until it contacts the stopper I and confirm that the control lever shim thickness (lever position) is L4. Note: Use screw (A) to fine-adjust the lever position. [Maintain a gap L2 between the screw (A) and the control lever (C).]
----------
L1=1+-0.1mm L2=1~2mm L3=0.82+-0.2mm L4=3.8+-0.5mm
----------
T1=6~9N-m(0.6~0.9kgf-m) T2=5~7N-m(0.5~0.7kgf-m) T3=2~3N-m(0.2~0.3kgf-m) L1=1+-0.1mm L2=1~2mm L4=3.8+-0.5mm




Have questions with 104740-2374?





Group cross 104740-2374 ZEXEL

 
 
INJECTION-PUMP ASSEMBLY
9 460 612 829 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Nissan 

 
167001C310 
INJECTION-PUMP ASSEMBLY
XM3-T
104740-2374  

104740-2375 
9 460 613 582 
 
INJECTION-PUMP ASSEMBLY

Nissan 

9 460 611 919 
167001C311 
INJECTION-PUMP ASSEMBLY
CD20-T
Back to top