104740-0408 ZEXEL 9 460 612 476 BOSCH INJECTION-PUMP ASSEMBLY 9460612476 1047400408


104740-0408 INJECTION-PUMP ASSEMBLY
Rating:
19
Buy INJECTION-PUMP ASSEMBLY 104740-0408 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 612 476 9460612476
ZEXEL 104740-0408 1047400408

Components :

0. INJECTION-PUMP ASSEMBLY 104740-0408
1. _
2. FUEL INJECTION PUMP 104640-0408
3. NUMBER PLATE 146962-0600
4. _ 146672-5520
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1183
8. Nozzle and Holder PN40 13 H50C
9. Open Pre:MPa(Kqf/cm2) 10.8{110}
10. NOZZLE-HOLDER 105078-0111
11. NOZZLE 105007-1210

Scheme ###:

1/6. [1] 146601-0700 PACKING RING
6. [1] 146100-0120 SUPPLY PUMP
9. [1] 146103-0000 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 146200-0720 DRIVE SHAFT
12/1. [1] 146200-0300 DRIVE SHAFT
12/2. [1] 146201-0000 WOODRUFF KEY
12/3. [2] 146202-0100 DAMPER
12/4. [1] 146203-0000 TOOTHED GEAR
17. [1] 146204-0000 PLAIN WASHER
20. [1] 146210-4220 ROLLER SET
24. [1] 146303-0100 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-2920 CAM PLATE
30. [1] 146600-0800 O-RING
31. [1] 146300-3900 PUMP PLUNGER
32. [1] 146301-0400 SLIDING PIECE
33. [1] 146603-0700 SHIM D17.5&7.5T0.60
34. [1] 146302-8400 COMPRESSION SPRING
34B. [1] 146302-8800 COMPRESSION SPRING
34C. [1] 146302-8100 COMPRESSION SPRING
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-0800 O-RING
37. [1] 146310-0700 COVER
38. [2] 146620-5000 BLEEDER SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM
48/1. [1] 146690-5900 SHIM
48/1. [1] 146690-6000 SHIM
48/1. [1] 146690-6100 SHIM
48/1. [1] 146690-6200 SHIM
48/1. [1] 146690-6300 SHIM
48/1. [1] 146690-6400 SHIM
48/1. [1] 146690-6500 SHIM
48/1. [1] 146690-6600 SHIM
48/1. [1] 146690-6700 SHIM
48/1. [1] 146690-6800 SHIM
48/1. [1] 146690-6900 SHIM
48/1. [1] 146690-7000 SHIM
48/1. [1] 146690-7100 SHIM
48/1. [1] 146690-7200 SHIM
48/1. [1] 146690-7300 SHIM
48/1. [1] 146690-7400 SHIM
48/1. [1] 146690-7500 SHIM
48/1. [1] 146690-7800 SHIM
49. [2] 146234-0120 GUIDE PIN
50. [1] 146403-2820 HYDRAULIC HEAD
50. [1] 146403-2820 HYDRAULIC HEAD
50. [1] 146403-2820 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-3420 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0000 COMPRESSION SPRING
58. [4] 146440-0220 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
66. [1] 146600-0100 O-RING
67. [1] 146503-4821 GOVERNOR COVER
67/1. [1] 146508-4921 GOVERNOR COVER
67/14. [1] 146621-1700 UNION NUT
67/16. [1] 146526-2800 BLEEDER SCREW
67/24. [4] 010206-1040 HEX-SOCKET-HEAD CAP SCREW
67/64. [1] 146927-5800 BRACKET
67/78. [1] 146600-1000 SEAL RING
67/200. [1] 139308-0300 PLAIN WASHER
67/201. [1] 146545-3400 THREADED PIN L53.00
67/201B. [1] 146545-3500 THREADED PIN L55.00
67/201C. [1] 146545-3600 THREADED PIN L57.00
67/202. [1] 139208-0900 UNION NUT
67/203. [1] 146600-1200 O-RING
68. [1] 146513-8920 CONTROL SHAFT
69. [1] 139310-0200 PLAIN WASHER
72. [1] 146536-7200 CONTROL LEVER
72B. [1] 146536-7300 CONTROL LEVER
73. [1] 014110-6440 LOCKING WASHER
75. [1] 146621-0700 UNION NUT
78. [1] 146549-8720 CONTROL LEVER
80. [1] 146547-8220 CONTROL LEVER
85. [1] 146549-7520 RACK
95. [1] 146851-0220 FULCRUM LEVER
104. [2] 146568-0000 SLOTTED SPRING PIN
105. [2] 026508-1140 GASKET D11.4&8.2T1
106. [2] 146588-0500 COILED SPRING
107. [1] 146569-0300 UNION NUT
108. [1] 146570-0420 GOVERNOR SHAFT
109. [1] 146600-0400 O-RING
110/1. [1] 146571-0000 SHIM D20.2&8.3T1.05
110/1. [1] 146571-0100 SHIM D20.2&8.3T1.25
110/1. [1] 146571-0200 SHIM D20.2&8.3T1.45
110/1. [1] 146571-0300 SHIM D20.2&8.3T1.65
110/1. [1] 146571-0400 SHIM D20.2&8.3T1.85
110/1. [1] 146571-0500 SHIM D20.2&8.3T1.15
110/1. [1] 146571-0600 SHIM D20.2&8.3T1.35
110/1. [1] 146571-0700 SHIM D20.2&8.3T1.55
110/1. [1] 146571-0800 SHIM D20.2&8.3T1.75
111. [1] 146602-0600 PLAIN WASHER D20&8.4T1.40
112. [1] 146572-0020 FLYWEIGHT ASSEMBLY
114. [1] 146602-0500 PLAIN WASHER D17&6.4T1.60
115. [1] 146575-6800 SLIDING SLEEVE
116. [1] 146576-0200 CAP
117/1. [1] 146577-1800 PLUG L2.10
117/1. [1] 146577-1900 PLUG L2.30
117/1. [1] 146577-2000 PLUG L2.50
117/1. [1] 146577-2100 PLUG L2.70
117/1. [1] 146577-2200 PLUG L2.90
117/1. [1] 146577-2300 PLUG L3.10
117/1. [1] 146577-2400 PLUG L3.30
117/1. [1] 146577-2500 PLUG L3.50
117/1. [1] 146577-2600 PLUG L3.70
117/1. [1] 146577-2700 PLUG L3.90
117/1. [1] 146577-2800 PLUG L4.10
117/1. [1] 146577-2900 PLUG L4.30
117/1. [1] 146577-3000 PLUG L4.50
117/1. [1] 146577-3100 PLUG L4.70
117/1. [1] 146577-3200 PLUG L4.90
117/1. [1] 146577-3300 PLUG L5.10
117/1. [1] 146577-6700 PLUG L2.2
117/1. [1] 146577-6800 PLUG L2.4
117/1. [1] 146577-6900 PLUG L2.6
117/1. [1] 146577-7000 PLUG L2.8
117/1. [1] 146577-7100 PLUG L3.0
117/1. [1] 146577-7200 PLUG L3.2
117/1. [1] 146577-7300 PLUG L3.4
117/1. [1] 146577-7400 PLUG L3.6
117/1. [1] 146577-7500 PLUG L3.8
117/1. [1] 146577-7600 PLUG L4.0
117/1. [1] 146577-7700 PLUG L4.2
117/1. [1] 146577-7800 PLUG L4.4
117/1. [1] 146577-7900 PLUG L4.6
117/1. [1] 146577-8000 PLUG L4.8
117/1. [1] 146577-8100 PLUG L5.0
117/1. [1] 146877-0000 PLUG L5.2
117/1. [1] 146877-0100 PLUG L5.3
117/1. [1] 146877-0200 PLUG L5.4
117/1. [1] 146877-0300 PLUG L5.5
117/1. [1] 146877-4700 PLUG
117/1. [1] 146877-4800 PLUG
117/1. [1] 146877-4900 PLUG
117/1. [1] 146877-5000 PLUG
123. [4] 139106-0200 FLAT-HEAD SCREW
130. [1] 146421-0020 CAPSULE
130/2. [1] 026508-1140 GASKET D11.4&8.2T1
130/3. [1] 146422-0000 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-0220 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 146120-1120 OVER FLOW VALVE
137. [2] 026512-1540 GASKET D15.4&12.2T1.50
138. [1] 146608-3220 INLET UNION
200. [1] 146206-0100 COILED SPRING
205. [1] 029470-4030 WOODRUFF KEY
220. [1] 146592-1600 COILED SPRING
221. [1] 146927-9220 BRACKET
223. [1] 146670-9620 SWITCH
232. [1] 146659-3600 CLAMPING BAND
236. [1] 139006-4800 BLEEDER SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-4320 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 146621-1000 UNION NUT
245. [3] 026512-1540 GASKET D15.4&12.2T1.50
246. [1] 139812-1900 EYE BOLT
247. [1] 146608-4820 INLET UNION
248. [1] 146614-0200 SPACER BUSHING
252. [1] 139006-4400 BLEEDER SCREW
275. [1] 146612-5800 BRACKET
276. [2] 010010-1640 BLEEDER SCREW M10P1.5L16 4T
280. [1] 146361-2920 START ADVANCE ASSY
281. [1] 146600-0800 O-RING
282. [1] 020146-3040 BLEEDER SCREW M6P1.0L30
283. [1] 014010-6140 PLAIN WASHER D13&6.5T1
310. [1] 146673-9721 POTENTCIOMETER
310/1. [1] 146673-9711 POTENTCIOMETER
310/2. [2] 139104-0400 FLAT-HEAD SCREW
310/3. [1] 146621-0500 UNION NUT
310/4. [1] 146620-2900 FLAT-HEAD SCREW
310/5. [1] 146614-2300 JOINT CONNECTION
310/6. [1] 146661-0401 BOOT
800S. [1] 146019-8920 PUMP HOUSING
800S/1/6. [1] 146601-0700 PACKING RING
804S. [1] 146232-0720 COMPRESSION SPRING
805S. [1] 146574-0120 PARTS SET
810S. [1] 146600-2420 REPAIR SET
835S. [1] 146598-1000 CAP
836S/1. [1] 146598-0600 CAP L18
836S/1. [1] 146598-0700 CAP L21
836S/1. [1] 146598-0800 CAP L24
836S/1. [1] 146598-0900 CAP L27
903. [1] 146672-5520 PULSE GENERATOR
903/2. [1] 146600-1300 O-RING &13W1.9
906. [1] 146962-0600 NAMEPLATE

Include in #2:

104740-0408 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 612 476 9460612476
ZEXEL 104740-0408 1047400408


Zexel num
Bosch num
Firm num
Name
104740-0408 
104740-0409 
9 460 612 476 
   
INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   13 13 13.3
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   30.3 29.8 30.8
Difference in delivery mm3/st.   2.5
Basic   *
Oil temperature degC   50 48 52
Injection timing adjustment_02
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   28.7 28.7 28.7
Oil temperature degC   50 48 52
Injection timing adjustment_03
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   30.3 29.3 31.3
Difference in delivery mm3/st.   3
Oil temperature degC   50 48 52
Injection timing adjustment_04
Pump speed r/min   2350 2350 2350
Average injection quantity mm3/st.   28.6 28.6 28.6
Oil temperature degC   52 50 54
Injection quantity adjustment
Pump speed r/min   2635 2635 2635
Average injection quantity mm3/st.   12.4 10.4 14.4
Difference in delivery mm3/st.   4
Basic   *
Oil temperature degC   55 52 58
Injection quantity adjustment_02
Pump speed r/min   2850 2850 2850
Average injection quantity mm3/st.   5
Oil temperature degC   55 52 58
Injection quantity adjustment_03
Pump speed r/min   2635 2635 2635
Average injection quantity mm3/st.   12.4 9.9 14.9
Difference in delivery mm3/st.   4.5
Oil temperature degC   55 52 58
Governor adjustment
Pump speed r/min   410 410 410
Average injection quantity mm3/st.   7 6 8
Difference in delivery mm3/st.   2
Basic   *
Oil temperature degC   48 46 50
Governor adjustment_02
Pump speed r/min   410 410 410
Average injection quantity mm3/st.   7 5.5 8.5
Difference in delivery mm3/st.   2.5
Oil temperature degC   48 46 50
Timer adjustment
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   50 40 60
Basic   *
Oil temperature degC   48 46 50
Timer adjustment_02
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   50 40 60
Oil temperature degC   48 46 50
Speed control lever angle
Pump speed r/min   410 410 410
Average injection quantity mm3/st.   0 0 0
Oil temperature degC   48 46 50
Remarks
Magnet OFF at idling position
 
0000000901
Pump speed r/min   1500 1500 1500
Overflow quantity cm3/min   436 306 566
Oil temperature degC   50 48 52
Stop lever angle
Pump speed r/min   1500 1500 1500
Pressure kPa   539 510 568
Pressure kgf/cm2   5.5 5.3 5.7
Basic   *
Oil temperature degC   50 48 52
Stop lever angle_02
Pump speed r/min   875 875 875
Pressure kPa   392 353 431
Pressure kgf/cm2   4 3.7 4.3
Oil temperature degC   50 48 52
Stop lever angle_03
Pump speed r/min   1500 1500 1500
Pressure kPa   539 500 578
Pressure kgf/cm2   5.5 5.2 5.8
Oil temperature degC   50 48 52
0000001101
Pump speed r/min   1500 1500 1500
Timer stroke mm   6.2 6 6.4
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   875 875 875
Timer stroke mm   2.1 1.6 2.6
Oil temperature degC   50 48 52
_03
Pump speed r/min   1500 1500 1500
Timer stroke mm   6.2 5.8 6.6
Oil temperature degC   50 48 52
_04
Pump speed r/min   2250 2250 2250
Timer stroke mm   9.6 8.8 10.2
Oil temperature degC   52 50 54
0000001201
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   20 19 21
Timer stroke TA mm   1.9 1.7 2.1
Timer stroke variation dT mm   1 1 1
Basic   *
Oil temperature degC   50 48 52
_02
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   20 19 21
Timer stroke TA mm   1.9 1.5 2.3
Oil temperature degC   50 48 52
_03
Pump speed r/min   1000 1000 1000
Average injection quantity mm3/st.   10 8.5 11.5
Timer stroke TA mm   1.2 0.2 2.2
Oil temperature degC   50 48 52
Timing setting
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.72 5.62 5.82
MS dimension mm   0.7 0.6 0.8
Control lever angle alpha deg.   25 21 29
Control lever angle beta deg.   43 38 48

Test data Ex:

0000001801 POTENTIOMETER ADJUSTMENT

Test data 104740-0408
N:Pump speed Q:Injection quantity V:Output voltage C/L: control lever position I:Idle F:Full A:Adjusting point B:Checking point Vi:Applied voltage
----------

----------
N1=1000r/min Q1=20.8+-1.0mm3/st V1=4.66+-0.03V V2=(1.00V) V3=(7.80V) a=(20.5deg) b=0deg c=43+-3deg Vi=10.00V

0000001901 SIDE LINK LEVER ADJUSTMENT

Test data 104740-0408
Side link lever adjustment 1. Adjusting the side link lever Hold the control lever (D) at position a. With the side link lever (G) contacting the stopper (H), turn the A/T lever (F) lightly clockwise to eliminate any rod (E) play. At this time, adjust the length of rod (E) so that the gap between the A/T lever (F) and the lever (G) is S. Then fix. J = idle switch L = the dimension when the switch is depressed (ie, on)
----------
a=0deg S=1+-0.2mm
----------
S=1+-0.2mm b=10deg

0000002001 W-CSD ADJUSTMENT

Test data 104740-0408
Adjustment of the W-CSD 1. Adjustment of the advance angle of the timer (1)Determine the timer advance angle using the graph. (2)Adjust screw A so that the timer advance angle determined in item (1) is obtained. 2. Adjustment of the W-FICD Adjust the rod (I) so that the clearance from the control lever is L as determined from the graph. At this time, CSD lever (B) and FICD lever (C) must contact. When the FICD lever is rotated clockwise, confirm that (D), (E), (F), (G), and (H) operate with no play. Y1 = timer stroke TA Y2 = control lever gap L X = temperature t G = timer stroke TA: H = control lever gap L:
----------

----------
TA=-0.041t+2.05 (t>=-20degC) L=-0.0925t+3.65 (t>=-20decC)




Have questions with 104740-0408?





Group cross 104740-0408 ZEXEL

Mazda 

 
PN4113800 
INJECTION-PUMP ASSEMBLY
PN
 
PN4113800A 
INJECTION-PUMP ASSEMBLY
PN
 
PN4113800D 
INJECTION-PUMP ASSEMBLY
PN
9 460 612 472 
PN4113800E 
INJECTION-PUMP ASSEMBLY
PN
9 460 612 473 
PN4113800F 
INJECTION-PUMP ASSEMBLY
PN
9 460 614 850 
PN4113800G 
INJECTION-PUMP ASSEMBLY
PN
9 460 612 474 
 
INJECTION-PUMP ASSEMBLY

Mazda 

9 460 612 475 
PN4113800H 
INJECTION-PUMP ASSEMBLY
PN
104740-0408  

104740-0409 
9 460 612 476 
 
INJECTION-PUMP ASSEMBLY

Mazda 

F 01G 09W 003 
PN4113800J 
INJECTION-PUMP ASSEMBLY
PN
Back to top