104740-0260 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1047400260 se4213800

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104740-0260 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104740-0260 1047400260

MAZDA SE4213800 se4213800

Cross reference number

ZEXEL 104740-0260 1047400260

MAZDA SE4213800 se4213800

Zexel num

Bosch num

Firm num

Name

104740-0260
104740-0262

SE4213800 MAZDA

INJECTION-PUMP ASSEMBLY
HA *

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105000-2010

Bosch type code NP-DN12SD12TT

Nozzle holder 105780-2080

Opening pressure MPa 14.7 14.7 15.19

Opening pressure kgf/cm2 150 150 155

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-840

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 52.6 52.1 53.1

Difference in delivery mm3/st. 3.5

Basic *

Injection timing adjustment_02

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 22.1 19.1 25.1

Injection timing adjustment_03

Pump speed r/min 1900 1900 1900

Average injection quantity mm3/st. 47.4 45.4 49.4

Injection timing adjustment_04

Pump speed r/min 1500 1500 1500

Average injection quantity mm3/st. 51.3 49.3 53.3

Injection timing adjustment_05

Pump speed r/min 1000 1000 1000

Average injection quantity mm3/st. 52.6 51.6 53.6

Injection timing adjustment_06

Pump speed r/min 500 500 500

Average injection quantity mm3/st. 46.6 44.6 48.6

Injection quantity adjustment

Pump speed r/min 2100 2100 2100

Average injection quantity mm3/st. 22.1 19.1 25.1

Basic *

Injection quantity adjustment_02

Pump speed r/min 2200 2200 2200

Average injection quantity mm3/st. 6

Governor adjustment

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 12.8 10.8 14.8

Difference in delivery mm3/st. 2.5

Basic *

Governor adjustment_02

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 12.8 10.8 14.8

Governor adjustment_03

Pump speed r/min 620

Average injection quantity mm3/st. 0 0 0

Timer adjustment

Pump speed r/min 100 100 100

Average injection quantity mm3/st. 78 78

Basic *

Speed control lever angle

Pump speed r/min 350 350 350

Average injection quantity mm3/st. 0 0 0

Remarks
Magnet OFF

0000000901

Pump speed r/min 1000 1000 1000

Overflow quantity cm3/min 450 318 582

Stop lever angle

Pump speed r/min 1500 1500 1500

Pressure kPa 588.5 559 618

Pressure kgf/cm2 6 5.7 6.3

Basic *

Stop lever angle_02

Pump speed r/min 500 500 500

Pressure kPa 255 226 284

Pressure kgf/cm2 2.6 2.3 2.9

Stop lever angle_03

Pump speed r/min 1500 1500 1500

Pressure kPa 588.5 559 618

Pressure kgf/cm2 6 5.7 6.3

Stop lever angle_04

Pump speed r/min 1900 1900 1900

Pressure kPa 725.5 696 755

Pressure kgf/cm2 7.4 7.1 7.7

0000001101

Pump speed r/min 1500 1500 1500

Timer stroke mm 5.2 5 5.4

Basic *

_02

Pump speed r/min 1000 1000 1000

Timer stroke mm 2.2 1.6 2.8

_03

Pump speed r/min 1500 1500 1500

Timer stroke mm 5.2 4.9 5.5

_04

Pump speed r/min 1900 1900 1900

Timer stroke mm 7.6 7 8.2

0000001201

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001501

Pump speed r/min 1000 1000 1000

Atmospheric pressure difference kPa -18.7 -18.7 -18.7

Atmospheric pressure difference mmHg -140 -140 -140

Average injection quantity mm3/st. 47.7 46.7 48.7

Basic *

_02

Pump speed r/min 1000 1000 1000

Atmospheric pressure difference kPa -18.7 -18.7 -18.7

Atmospheric pressure difference mmHg -140 -140 -140

Average injection quantity mm3/st. 47.7 46.2 49.2

Timing setting

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.8 5.7 5.9

MS dimension mm 1.8 1.7 1.9

Pre-stroke mm 0.2 0.18 0.22

Control lever angle alpha deg. 20 16 24

Control lever angle beta deg. 38 33 43

Test data Ex:

0000001501 ANEROID COMPENSATOR

ACS adjustment Full load injection quantity at high altitudes and ACS adjusting method 1. Full load injection quantity adjustment (1)Remove the ACS cover and remove the bellows and adjusting shim. (2)Perform all adjustments as per the adjustment standard except for ACS adjustment. 2. ACS adjustment (1)Assemble the ACS cover, bellows and adjusting shim. (2)At N = N1, adjust using shims so that the decrease amount for altitude is as specified in the graph. N:Pump speed X1:Atmospheric pressure X2:Altitude Y:Decrease quantity A:Adjustment value B:Inspection value
----------
N1=1000r/min
----------