104701-3000 ZEXEL 9 460 611 722 BOSCH INJECTION-PUMP ASSEMBLY 9460611722 1047013000 me202093


104701-3000 INJECTION-PUMP ASSEMBLY
Rating:
12
Buy INJECTION-PUMP ASSEMBLY 104701-3000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 611 722 9460611722
ZEXEL 104701-3000 1047013000
MITSUBISHI ME202093 me202093

Components :

0. INJECTION-PUMP ASSEMBLY 104701-3000
1. _
2. FUEL INJECTION PUMP 104601-3000
3. NUMBER PLATE 148636-0000
4. _ 479773-9820
5. CAPSULE
6. ADJUSTING DEVICE
7. NOZZLE AND HOLDER ASSY 105148-1401
8. Nozzle and Holder ME201844
9. Open Pre:MPa(Kqf/cm2) 14.7{150}
10. NOZZLE-HOLDER 105078-0181
11. NOZZLE 105007-1350

Scheme ###:

1/6. [1] 146601-0700 PACKING RING
6. [1] 146100-0120 SUPPLY PUMP
9. [1] 148103-0400 COVER
10. [2] 139104-0000 FLAT-HEAD SCREW
12. [1] 148200-0520 DRIVE SHAFT
12/3. [1] 146201-0000 WOODRUFF KEY
17. [1] 146204-0000 PLAIN WASHER
20. [1] 148210-0120 ROLLER SET
24. [1] 146303-0000 BEARING PIN
25. [1] 146304-0000 BEARING PIN
26. [1] 146305-0000 CLAMPING BAND
27. [1] 146205-0000 SLOTTED WASHER
29. [1] 146220-4820 CAM PLATE
30. [1] 146600-3000 O-RING
31. [1] 146300-1900 PUMP PLUNGER
32. [1] 146301-0200 SLIDING PIECE
33. [1] 146603-1100 SHIM D17.5&7.5T1.20
34. [1] 146306-1800 COMPRESSION SPRING
35/1. [0] 146603-0700 SHIM D17.5&7.5T0.60
35/1. [0] 146603-0800 SHIM D17.5&7.5T0.70
35/1. [0] 146603-0900 SHIM D17.5&7.5T0.90
35/1. [0] 146603-1000 SHIM D17.5&7.5T1.00
35/1. [0] 146603-1100 SHIM D17.5&7.5T1.20
35/1. [0] 146603-3600 SHIM D17.5&7.5T2.40
36. [1] 146600-3000 O-RING
37. [1] 479773-9920 TIMER PISTON SENSOR
38. [2] 010206-2040 HEX-SOCKET-HEAD CAP SCREW
39. [1] 146310-0100 COVER
40. [2] 146620-5000 BLEEDER SCREW
43. [1] 146230-0000 SHIM
44. [1] 146230-0100 PLAIN WASHER
45. [1] 146231-0001 SLOTTED WASHER
47. [2] 146233-0000 SLOTTED WASHER
48/1. [1] 146603-0000 SHIM D17.0&5.2T0.50
48/1. [1] 146603-0100 SHIM D17.0&5.2T0.80
48/1. [1] 146603-0200 SHIM D17.0&5.2T1.00
48/1. [1] 146603-0300 SHIM D17.0&5.2T1.20
48/1. [1] 146603-0400 SHIM D17.0&5.2T1.50
48/1. [1] 146603-0500 SHIM D17.0&5.2T1.80
48/1. [1] 146603-0600 SHIM D17.0&5.2T2.00
48/1. [1] 146690-1400 SHIM D17&5.2T0.9
48/1. [1] 146690-1500 SHIM D17&5.2T1.1
48/1. [1] 146690-1600 SHIM D17&5.2T1.3
48/1. [1] 146690-1700 SHIM D17&5.2T1.4
48/1. [1] 146690-1800 SHIM D17&5.2T1.6
48/1. [1] 146690-1900 SHIM D17&5.2T1.7
48/1. [1] 146690-5800 SHIM
48/1. [1] 146690-5900 SHIM
48/1. [1] 146690-6000 SHIM D17&5.2T2.3
48/1. [1] 146690-6100 SHIM D17&5.2T2.4
48/1. [1] 146690-6200 SHIM D17&5.2T2.5
48/1. [1] 146690-6300 SHIM D17&5.2T2.6
48/1. [1] 146690-6400 SHIM
48/1. [1] 146690-6500 SHIM
48/1. [1] 146690-6600 SHIM
48/1. [1] 146690-6700 SHIM D17&5.2T3.0
48/1. [1] 146690-6800 SHIM D17&5.2T3.1
48/1. [1] 146690-6900 SHIM D17&5.2T3.2
48/1. [1] 146690-7000 SHIM D17&5.2T3.3
48/1. [1] 146690-7100 SHIM
48/1. [1] 146690-7200 SHIM
48/1. [1] 146690-7300 SHIM
48/1. [1] 146690-7400 SHIM D17&5.2T0.7
48/1. [1] 146690-7500 SHIM
48/1. [1] 146690-7800 SHIM D17&5.2T0.2
49. [2] 146234-0120 GUIDE PIN
50. [1] 146403-6120 HYDRAULIC HEAD
50. [1] 146403-6120 HYDRAULIC HEAD
50. [1] 146403-6120 HYDRAULIC HEAD
51. [1] 146600-0000 O-RING
52/1. [1] 146420-0000 SHIM D9.5&3.0T1.90
52/1. [1] 146420-0100 SHIM D9.5&3.0T1.92
52/1. [1] 146420-0200 SHIM D9.5&3.0T1.94
52/1. [1] 146420-0300 SHIM D9.5&3.0T1.96
52/1. [1] 146420-0400 SHIM D9.5&3.0T1.98
52/1. [1] 146420-0500 SHIM D9.5&3.0T2.00
52/1. [1] 146420-0600 SHIM D9.5&3.0T2.02
52/1. [1] 146420-0700 SHIM D9.5&3.0T2.04
52/1. [1] 146420-0800 SHIM D9.5&3.0T2.06
52/1. [1] 146420-0900 SHIM D9.5&3.0T2.08
52/1. [1] 146420-1000 SHIM D9.5&3.0T2.10
52/1. [1] 146420-1100 SHIM D9.5&3.0T2.12
52/1. [1] 146420-1200 SHIM D9.5&3.0T2.14
52/1. [1] 146420-1300 SHIM D9.5&3.0T2.16
52/1. [1] 146420-1400 SHIM D9.5&3.0T2.18
52/1. [1] 146420-1500 SHIM D9.5&3.0T2.20
52/1. [1] 146420-1600 SHIM D9.5&3.0T2.22
52/1. [1] 146420-1700 SHIM D9.5&3.0T2.24
52/1. [1] 146420-1800 SHIM D9.5&3.0T2.26
52/1. [1] 146420-1900 SHIM D9.5&3.0T2.28
52/1. [1] 146420-2000 SHIM D9.5&3.0T2.30
52/1. [1] 146420-2100 SHIM D9.5&3.0T2.32
52/1. [1] 146420-2200 SHIM D9.5&3.0T2.34
52/1. [1] 146420-2300 SHIM D9.5&3.0T2.36
52/1. [1] 146420-2400 SHIM D9.5&3.0T2.38
52/1. [1] 146420-2500 SHIM D9.5&3.0T2.40
52/1. [1] 146420-2600 SHIM D9.5&3.0T2.42
52/1. [1] 146420-2700 SHIM D9.5&3.0T2.44
52/1. [1] 146420-2800 SHIM D9.5&3.0T2.46
52/1. [1] 146420-2900 SHIM D9.5&3.0T2.48
52/1. [1] 146420-3000 SHIM D9.5&3.0T2.50
52/1. [1] 146420-3100 SHIM D9.5&3.0T2.52
52/1. [1] 146420-3200 SHIM D9.5&3.0T2.54
52/1. [1] 146420-3300 SHIM D9.5&3.0T2.56
52/1. [1] 146420-3400 SHIM D9.5&3.0T2.58
52/1. [1] 146420-3500 SHIM D9.5&3.0T2.60
52/1. [1] 146420-3600 SHIM D9.5&3.0T2.62
52/1. [1] 146420-3700 SHIM D9.5&3.0T2.64
52/1. [1] 146420-3800 SHIM D9.5&3.0T2.66
52/1. [1] 146420-3900 SHIM D9.5&3.0T2.68
52/1. [1] 146420-4000 SHIM D9.5&3.0T2.70
52/1. [1] 146420-4100 SHIM D9.5&3.0T2.72
52/1. [1] 146420-4200 SHIM D9.5&3.0T2.74
52/1. [1] 146420-4300 SHIM D9.5&3.0T2.76
52/1. [1] 146420-4400 SHIM D9.5&3.0T2.78
52/1. [1] 146420-4500 SHIM D9.5&3.0T2.80
52/1. [1] 146420-4600 SHIM D9.5&3.0T2.82
52/1. [1] 146420-4700 SHIM D9.5&3.0T2.84
52/1. [1] 146420-4800 SHIM D9.5&3.0T2.86
52/1. [1] 146420-4900 SHIM D9.5&3.0T2.88
52/1. [1] 146420-5000 SHIM D9.5&3.0T2.90
52/1. [1] 146420-5100 SHIM D9.5&3.0T1.74
52/1. [1] 146420-5200 SHIM D9.5&3.0T1.76
52/1. [1] 146420-5300 SHIM D9.5&3.0T1.78
52/1. [1] 146420-5400 SHIM D9.5&3.0T1.80
52/1. [1] 146420-5500 SHIM D9.5&3.0T1.82
52/1. [1] 146420-5600 SHIM D9.5&3.0T1.84
52/1. [1] 146420-5700 SHIM D9.5&3.0T1.86
52/1. [1] 146420-5800 SHIM D9.5&3.0T1.88
54. [4] 146433-0100 GASKET D12&6.4T1.00
55. [4] 146430-0320 DELIVERY-VALVE ASSEMBLY
56. [4] 146432-0700 COMPRESSION SPRING
58. [4] 146440-0720 FITTING
60. [3] 139106-0100 FLAT-HEAD SCREW
123. [1] 146620-8800 FLAT-HEAD SCREW
130. [1] 146421-0420 CAPSULE
130/2. [1] 139508-0200 GASKET D11.4&8.2T1
130/3. [1] 146422-0300 BLEEDER SCREW
130/4. [1] 146600-0500 O-RING
133. [1] 146600-0600 O-RING
134. [1] 146600-0700 O-RING
135. [1] 146110-1120 CONTROL VALVE
135/5. [1] 146114-0000 SPRING WASHER
136. [1] 148120-0020 OVER FLOW VALVE
137. [3] 139512-0500 GASKET
138. [1] 146668-3220 INLET UNION
158. [1] 146614-6900 SPACER BUSHING
200. [1] 146206-0100 COILED SPRING
205. [1] 029470-4030 WOODRUFF KEY
232. [1] 148613-1920 BRACKET
234. [1] 146620-2700 HEX-SOCKET-HEAD CAP SCREW
236. [1] 146620-2700 HEX-SOCKET-HEAD CAP SCREW
237. [1] 146620-0200 HEX-SOCKET-HEAD CAP SCREW
240. [1] 146650-1220 PULLING ELECTROMAGNET
240/8. [1] 146600-1700 O-RING
243. [1] 146621-1000 UNION NUT
244. [1] 148613-2120 BRACKET
245. [3] 139512-0500 GASKET
246. [1] 139812-0500 EYE BOLT
247. [1] 146668-3320 INLET UNION
248. [1] 146614-0200 SPACER BUSHING
282. [1] 139006-4400 BLEEDER SCREW
504. [1] 146649-5100 RESISTER
505. [1] 148530-1020 GOVERNOR;ELECTRIC
506. [3] 146620-8900 FLAT-HEAD SCREW
515. [1] 106144-1040 TIMING CONTROL VALVE
515/12. [1] 161440-3800 O-RING
515/13. [1] 161440-3700 O-RING
516. [2] 010206-1440 HEX-SOCKET-HEAD CAP SCREW M6P1L14
531. [1] 479773-9820 PULSE GENERATOR
800S. [1] 148009-0620 PUMP HOUSING
800S/1/6. [1] 146601-0700 PACKING RING
804S. [1] 146232-0720 COMPRESSION SPRING
878S. [1] 148600-1300 SEAL RING
906. [1] 148636-0000 NAMEPLATE
910S. [1] 146600-4520 PARTS SET
910S. [1] 146600-4520 PARTS SET
911S. [1] 479773-9820 PULSE GENERATOR
912S. [1] 139508-0200 GASKET D11.4&8.2T1
913S. [1] 146422-0300 BLEEDER SCREW
914S. [1] 146699-0020 VALVE SET
914S. [1] 146699-0020 VALVE SET
914S. [1] 146699-0020 VALVE SET
916S. [1] 025804-1610 WOODRUFF KEY

Include in #2:

104701-3000 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 611 722 9460611722
ZEXEL 104701-3000 1047013000
MITSUBISHI ME202093 me202093


Zexel num
Bosch num
Firm num
Name
104701-3000 
104701-3001 
9 460 611 722 
ME202093  MITSUBISHI
INJECTION-PUMP ASSEMBLY
4M40 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113orSAEJ967d
Test oil temperature degC   45 45 50
Nozzle   105780-0060
Bosch type code   NP-DN0SD1510
Nozzle holder   105780-2150
Opening pressure MPa   133 133 136
Opening pressure kgf/cm2   133 133 136
Injection pipe   157805-7320
Injection pipe
Inside diameter - outside diameter - length (mm)
mm   2-6-450
Joint assembly   157641-4720
Tube assembly   157641-4020
Transfer pump pressure kPa   20 20 20
Transfer pump pressure kgf/cm2   0.2 0.2 0.2
Direction of rotation (viewed from drive side)
Right
  R
Manual controller assembly   105782-8280
Manual controller   105782-8270
Wire harness   407980-2390
Intermediate harness   407980-2400
Governor adjustment
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Pump chamber pressure kPa   588.5 559 618
Pump chamber pressure kgf/cm2   6 5.7 6.3
Basic   *
Governor adjustment_02
Pump speed r/min   100 100 100
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Pump chamber pressure kPa   294 294
Pump chamber pressure kgf/cm2   3 3
Governor adjustment_03
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Pump chamber pressure kPa   588 549 627
Pump chamber pressure kgf/cm2   6 5.6 6.4
Governor adjustment_04
Pump speed r/min   2000 2000 2000
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Pump chamber pressure kPa   726 677 775
Pump chamber pressure kgf/cm2   7.4 6.9 7.9
Boost compensator adjustment
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Timer stroke mm   8.6 8.4 8.8
Basic   *
Boost compensator adjustment_02
Pump speed r/min   100 100 100
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Timer stroke mm   3 0.9 5.1
Boost compensator adjustment_03
Pump speed r/min   350 350 350
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Timer stroke mm   6.3 4.2 8.4
Boost compensator adjustment_04
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Timer stroke mm   8.6 8.3 8.9
Boost compensator adjustment_05
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   80 80 80
U alpha soll V   2.81 2.81 2.81
Timer stroke mm   3.6 2 5.2
Boost compensator adjustment_06
Pump speed r/min   1800 1800 1800
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Timer stroke mm   9.75 9.3 10.2
Boost compensator adjustment_07
Pump speed r/min   2300 2300 2300
TCV duty (%) F TCV 60Hz %   0 0 0
U alpha soll V   2.81 2.81 2.81
Timer stroke mm   0 0 0
Timer adjustment
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   0 0 0
U alpha soll V   2.81 2.81 2.81
Vtps V   0.77 0.45 1.09
Basic   *
Timer adjustment_02
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   0 0 0
U alpha soll V   2.81 2.81 2.81
Vtps V   0.77 0.45 1.09
Timer adjustment_03
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Vtps V   3.704 3.3 4.108
Speed control lever angle
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Overflow quantity cm3/min   560 430 690
0000000901
Pump speed r/min   1000 1000 1000
U alpha soll + dU alpha soll V   2.81 2.81 2.81
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   83.8 83.3 84.3
Difference in delivery mm3/st.   6
Basic   *
_02
Pump speed r/min   375 375 375
U alpha soll + dU alpha soll V   2.17 2.17 2.17
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   24.2 20.7 27.7
Difference in delivery mm3/st.   2.5
Basic   *
Remarks
Confirmation of difference in delivery
 
_03
Pump speed r/min   100 100 100
U alpha soll + dU alpha soll V   3.15 3.15 3.15
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   68.2 58.2 78.2
_04
Pump speed r/min   375 375 375
U alpha soll + dU alpha soll V   2.17 2.17 2.17
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   24.2 20.7 27.7
_05
Pump speed r/min   600 600 600
U alpha soll + dU alpha soll V   2.56 2.56 2.56
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   62.1 59.1 65.1
_06
Pump speed r/min   750 750 750
U alpha soll + dU alpha soll V   2.5 2.5 2.5
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   59.3 56.3 62.3
_07
Pump speed r/min   800 800 800
U alpha soll + dU alpha soll V   2.77 2.77 2.77
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   80.8 77.8 83.8
_08
Pump speed r/min   1000 1000 1000
U alpha soll + dU alpha soll V   2.81 2.81 2.81
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   83.8 82.8 84.8
_09
Pump speed r/min   1500 1500 1500
U alpha soll + dU alpha soll V   2.87 2.87 2.87
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   87.7 84.7 90.7
_10
Pump speed r/min   2000 2000 2000
U alpha soll + dU alpha soll V   2.72 2.72 2.72
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   74.8 71.8 77.8
_11
Pump speed r/min   2450 2450 2450
U alpha soll + dU alpha soll V   1.72 1.72 1.72
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity mm3/st.   24.4 21.4 27.4
Stop lever angle
Pump speed r/min   2000 2000 2000
U alpha soll + dU alpha soll V   2.72 2.72 2.72
TCV duty (%) F TCV 60Hz %   100 100 100
Average injection quantity cm3/min   0 0 0
0000001101
Pump speed r/min   200 200 200
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Speed output
N=Measure the actual speed.
r/min   N+-8
0000001201
Pump speed r/min   1000 1000 1000
TCV duty (%) F TCV 60Hz %   100 100 100
U alpha soll V   2.81 2.81 2.81
Temperature output
Measure T = actual output temperature
degC   T+-5
0000001301
Max. applied voltage V   8 8 8
Test voltage V   13 12 14
0000001401
K dimension mm   3.3 3.2 3.4
KF dimension mm   5.62 5.52 5.72
Pre-stroke mm   0.1 0.08 0.12

Test data Ex:

Injection timing adjustment Comp. resistor/voltage

Test data 104701-3000
Compensation resistance/compensation voltage comparison A = Compensation resistor number B= Compensation resistance C = Compensation voltage delta U alpha soll
----------

----------

0000001601 HARNESS & CONNECTOR

Test data 104701-3000
Connector and binder assembly specification (1)To make routing the F.C.V. and T.C.V. harness easier, pull out the fixed side (C, towards F) before installing the GE connector. (2)Route the F.C.V. harness between the brackets. (3)Assemble the connectors and clips in the order A, B, C, D, E, F, G, H, I and J. A:G.E. Connector B:F.C.V. harness C:F.C.V. terminal D:G.E. and F.C.V. harness clip E:Q adjustment connector F:T.C.V. Connector G:TCV harness clip H:P/U Connector I:T.P.S. Connector J:Q adjustment, P/U and TCV harness clip
----------

----------




Have questions with 104701-3000?





Group cross 104701-3000 ZEXEL

Mitsubishi 

104701-3000  

104701-3001 
9 460 611 722 
ME202093 
INJECTION-PUMP ASSEMBLY
4M40
9 460 611 851 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 611 852 
ME202411 
INJECTION-PUMP ASSEMBLY
4M40
9 460 611 402 
 
INJECTION-PUMP ASSEMBLY

Mitsubishi 

9 460 613 861 
ME202651 
INJECTION-PUMP ASSEMBLY
4M40TI
Back to top