104701-2013 ZEXEL 9 460 611 915 BOSCH INJECTION-PUMP ASSEMBLY 9460611915 1047012013

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 104701-2013 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 460 611 915 9460611915

ZEXEL 104701-2013 1047012013

Components :

0.	INJECTION-PUMP ASSEMBLY	104701-2013
1.	_
2.	FUEL INJECTION PUMP	104601-2013
3.	NUMBER PLATE	148633-1300
4.	_
5.	CAPSULE
6.	ADJUSTING DEVICE	105148-8003
7.	NOZZLE AND HOLDER ASSY	105148-1221
8.	Nozzle and Holder	16600-63G01
9.	Open Pre:MPa(Kqf/cm2)	9.8{100}
10.	NOZZLE-HOLDER	105078-0050
11.	NOZZLE	105007-1210

Scheme ###:

1/6.	[1]	146601-0900	PACKING RING
6.	[1]	146100-0020	SUPPLY PUMP
9.	[1]	148103-0300	COVER
10.	[2]	139104-0000	FLAT-HEAD SCREW
12.	[1]	148200-0620	DRIVE SHAFT
12/3.	[1]	146201-0000	WOODRUFF KEY
17.	[1]	146204-0000	PLAIN WASHER
20.	[1]	148210-0220	ROLLER SET
24.	[1]	146303-0000	BEARING PIN
25.	[1]	146304-0000	BEARING PIN
26.	[1]	146305-0000	CLAMPING BAND
27.	[1]	146205-0000	SLOTTED WASHER
29.	[1]	146220-4520	CAM PLATE
30.	[1]	146600-3000	O-RING
31.	[1]	146300-1900	PUMP PLUNGER
32.	[1]	146301-0200	SLIDING PIECE
33.	[1]	146603-0700	SHIM D17.5&7.5T0.60
34.	[1]	146306-2100	COMPRESSION SPRING
35/1.	[0]	146603-0700	SHIM D17.5&7.5T0.60
35/1.	[0]	146603-0800	SHIM D17.5&7.5T0.70
35/1.	[0]	146603-0900	SHIM D17.5&7.5T0.90
35/1.	[0]	146603-1000	SHIM D17.5&7.5T1.00
35/1.	[0]	146603-1100	SHIM D17.5&7.5T1.20
35/1.	[0]	146603-3600	SHIM D17.5&7.5T2.40
36.	[1]	146600-3000	O-RING
37.	[1]	146310-0700	COVER
38.	[2]	146620-5000	BLEEDER SCREW
39.	[1]	146310-0100	COVER
40.	[2]	146620-5000	BLEEDER SCREW
43.	[1]	146230-0000	SHIM
44.	[1]	146230-0100	PLAIN WASHER
45.	[1]	146231-0001	SLOTTED WASHER
47.	[2]	146233-0000	SLOTTED WASHER
48/1.	[1]	146603-0000	SHIM D17.0&5.2T0.50
48/1.	[1]	146603-0100	SHIM D17.0&5.2T0.80
48/1.	[1]	146603-0200	SHIM D17.0&5.2T1.00
48/1.	[1]	146603-0300	SHIM D17.0&5.2T1.20
48/1.	[1]	146603-0400	SHIM D17.0&5.2T1.50
48/1.	[1]	146603-0500	SHIM D17.0&5.2T1.80
48/1.	[1]	146603-0600	SHIM D17.0&5.2T2.00
48/1.	[1]	146690-1400	SHIM D17&5.2T0.9
48/1.	[1]	146690-1500	SHIM D17&5.2T1.1
48/1.	[1]	146690-1600	SHIM D17&5.2T1.3
48/1.	[1]	146690-1700	SHIM D17&5.2T1.4
48/1.	[1]	146690-1800	SHIM D17&5.2T1.6
48/1.	[1]	146690-1900	SHIM D17&5.2T1.7
48/1.	[1]	146690-5800	SHIM
48/1.	[1]	146690-5900	SHIM
48/1.	[1]	146690-6000	SHIM
48/1.	[1]	146690-6100	SHIM
48/1.	[1]	146690-6200	SHIM
48/1.	[1]	146690-6300	SHIM
48/1.	[1]	146690-6400	SHIM
48/1.	[1]	146690-6500	SHIM
48/1.	[1]	146690-6600	SHIM
48/1.	[1]	146690-6700	SHIM
48/1.	[1]	146690-6800	SHIM
48/1.	[1]	146690-6900	SHIM
48/1.	[1]	146690-7000	SHIM
48/1.	[1]	146690-7100	SHIM
48/1.	[1]	146690-7200	SHIM
48/1.	[1]	146690-7300	SHIM
48/1.	[1]	146690-7400	SHIM
48/1.	[1]	146690-7500	SHIM
48/1.	[1]	146690-7800	SHIM
49.	[2]	146234-0120	GUIDE PIN
50.	[1]	146403-6120	HYDRAULIC HEAD
50.	[1]	146403-6120	HYDRAULIC HEAD
50.	[1]	146403-6120	HYDRAULIC HEAD
51.	[1]	146600-0000	O-RING
52/1.	[1]	146420-0000	SHIM D9.5&3.0T1.90
52/1.	[1]	146420-0100	SHIM D9.5&3.0T1.92
52/1.	[1]	146420-0200	SHIM D9.5&3.0T1.94
52/1.	[1]	146420-0300	SHIM D9.5&3.0T1.96
52/1.	[1]	146420-0400	SHIM D9.5&3.0T1.98
52/1.	[1]	146420-0500	SHIM D9.5&3.0T2.00
52/1.	[1]	146420-0600	SHIM D9.5&3.0T2.02
52/1.	[1]	146420-0700	SHIM D9.5&3.0T2.04
52/1.	[1]	146420-0800	SHIM D9.5&3.0T2.06
52/1.	[1]	146420-0900	SHIM D9.5&3.0T2.08
52/1.	[1]	146420-1000	SHIM D9.5&3.0T2.10
52/1.	[1]	146420-1100	SHIM D9.5&3.0T2.12
52/1.	[1]	146420-1200	SHIM D9.5&3.0T2.14
52/1.	[1]	146420-1300	SHIM D9.5&3.0T2.16
52/1.	[1]	146420-1400	SHIM D9.5&3.0T2.18
52/1.	[1]	146420-1500	SHIM D9.5&3.0T2.20
52/1.	[1]	146420-1600	SHIM D9.5&3.0T2.22
52/1.	[1]	146420-1700	SHIM D9.5&3.0T2.24
52/1.	[1]	146420-1800	SHIM D9.5&3.0T2.26
52/1.	[1]	146420-1900	SHIM D9.5&3.0T2.28
52/1.	[1]	146420-2000	SHIM D9.5&3.0T2.30
52/1.	[1]	146420-2100	SHIM D9.5&3.0T2.32
52/1.	[1]	146420-2200	SHIM D9.5&3.0T2.34
52/1.	[1]	146420-2300	SHIM D9.5&3.0T2.36
52/1.	[1]	146420-2400	SHIM D9.5&3.0T2.38
52/1.	[1]	146420-2500	SHIM D9.5&3.0T2.40
52/1.	[1]	146420-2600	SHIM D9.5&3.0T2.42
52/1.	[1]	146420-2700	SHIM D9.5&3.0T2.44
52/1.	[1]	146420-2800	SHIM D9.5&3.0T2.46
52/1.	[1]	146420-2900	SHIM D9.5&3.0T2.48
52/1.	[1]	146420-3000	SHIM D9.5&3.0T2.50
52/1.	[1]	146420-3100	SHIM D9.5&3.0T2.52
52/1.	[1]	146420-3200	SHIM D9.5&3.0T2.54
52/1.	[1]	146420-3300	SHIM D9.5&3.0T2.56
52/1.	[1]	146420-3400	SHIM D9.5&3.0T2.58
52/1.	[1]	146420-3500	SHIM D9.5&3.0T2.60
52/1.	[1]	146420-3600	SHIM D9.5&3.0T2.62
52/1.	[1]	146420-3700	SHIM D9.5&3.0T2.64
52/1.	[1]	146420-3800	SHIM D9.5&3.0T2.66
52/1.	[1]	146420-3900	SHIM D9.5&3.0T2.68
52/1.	[1]	146420-4000	SHIM D9.5&3.0T2.70
52/1.	[1]	146420-4100	SHIM D9.5&3.0T2.72
52/1.	[1]	146420-4200	SHIM D9.5&3.0T2.74
52/1.	[1]	146420-4300	SHIM D9.5&3.0T2.76
52/1.	[1]	146420-4400	SHIM D9.5&3.0T2.78
52/1.	[1]	146420-4500	SHIM D9.5&3.0T2.80
52/1.	[1]	146420-4600	SHIM D9.5&3.0T2.82
52/1.	[1]	146420-4700	SHIM D9.5&3.0T2.84
52/1.	[1]	146420-4800	SHIM D9.5&3.0T2.86
52/1.	[1]	146420-4900	SHIM D9.5&3.0T2.88
52/1.	[1]	146420-5000	SHIM D9.5&3.0T2.90
52/1.	[1]	146420-5100	SHIM D9.5&3.0T1.74
52/1.	[1]	146420-5200	SHIM D9.5&3.0T1.76
52/1.	[1]	146420-5300	SHIM D9.5&3.0T1.78
52/1.	[1]	146420-5400	SHIM D9.5&3.0T1.80
52/1.	[1]	146420-5500	SHIM D9.5&3.0T1.82
52/1.	[1]	146420-5600	SHIM D9.5&3.0T1.84
52/1.	[1]	146420-5700	SHIM D9.5&3.0T1.86
52/1.	[1]	146420-5800	SHIM D9.5&3.0T1.88
54.	[4]	146433-0100	GASKET D12&6.4T1.00
55.	[4]	146430-0320	DELIVERY-VALVE ASSEMBLY
56.	[4]	146432-0700	COMPRESSION SPRING
58.	[4]	146440-0220	FITTING
60.	[3]	139106-0100	FLAT-HEAD SCREW
123.	[1]	146620-8800	FLAT-HEAD SCREW
130.	[1]	146421-1020	CAPSULE
130/2.	[1]	139508-0200	GASKET D11.4&8.2T1
130/3.	[1]	146422-0300	BLEEDER SCREW
130/4.	[1]	146600-0500	O-RING
133.	[1]	146600-0600	O-RING
134.	[1]	146600-0700	O-RING
135.	[1]	146110-3220	CONTROL VALVE
135/5.	[1]	146114-0000	SPRING WASHER
136.	[1]	148120-0020	OVER FLOW VALVE
137.	[3]	139512-0200	GASKET D18.5&12.2T1.00
138.	[1]	146668-0420	INLET UNION
158.	[1]	146614-6900	SPACER BUSHING
200.	[1]	146206-0100	COILED SPRING
230.	[1]	148613-1220	BRACKET
236.	[1]	146620-2700	HEX-SOCKET-HEAD CAP SCREW
237.	[1]	146620-0200	HEX-SOCKET-HEAD CAP SCREW
240.	[1]	146688-0120	PULLING ELECTROMAGNET
240/8.	[1]	146600-1700	O-RING
243.	[1]	146621-1000	UNION NUT
245.	[3]	139512-0200	GASKET D18.5&12.2T1.00
246.	[1]	139812-0500	EYE BOLT
246.	[1]	139812-0500	EYE BOLT
247.	[1]	146668-3020	INLET UNION
248.	[1]	146614-0200	SPACER BUSHING
282.	[1]	139006-4400	BLEEDER SCREW
298.	[3]	146659-8000	CLAMPING BAND
504/1.	[1]	146649-4500	RESISTER
504/1.	[1]	146649-4600	RESISTER
504/1.	[1]	146649-4700	RESISTER
504/1.	[1]	146649-4800	RESISTER
504/1.	[1]	146649-4900	RESISTER
504/1.	[1]	146649-5000	RESISTER
504/1.	[1]	146649-5100	RESISTER
504/1.	[1]	146649-5200	RESISTER
504/1.	[1]	146649-5300	RESISTER
504/1.	[1]	146649-5400	RESISTER
504/1.	[1]	146649-5500	RESISTER
504/1.	[1]	146649-5600	RESISTER
504/1.	[1]	146649-5700	RESISTER
505.	[1]	148531-1020	GOVERNOR;ELECTRIC
506.	[3]	146620-8900	FLAT-HEAD SCREW
515.	[1]	106144-1051	TIMING CONTROL VALVE
515/12.	[1]	161440-3800	O-RING
515/13.	[1]	161440-3700	O-RING
516.	[2]	010206-1440	HEX-SOCKET-HEAD CAP SCREW M6P1L14
531.	[1]	479773-4521	PULSE GENERATOR
531/6.	[1]	479773-6500	O-RING
800S.	[1]	148009-0320	PUMP HOUSING
800S/1/6.	[1]	146601-0900	PACKING RING
804S.	[1]	146232-0720	COMPRESSION SPRING
878S.	[1]	148600-1300	SEAL RING
906.	[1]	148633-1300	NAMEPLATE

Include in #2:

104701-2013 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 460 611 915 9460611915

ZEXEL 104701-2013 1047012013

Zexel num

Bosch num

Firm num

Name

104701-2013
104701-2014

9 460 611 915

INJECTION-PUMP ASSEMBLY
* K

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113orSAEJ967d

Test oil temperature degC 45 45 50

Nozzle 105780-0060

Bosch type code NP-DN0SD1510

Nozzle holder 105780-2150

Opening pressure MPa 13 13 13.3

Opening pressure kgf/cm2 133 133 136

Injection pipe 157805-7320

Injection pipe
Inside diameter - outside diameter - length (mm) mm 2-6-450

Joint assembly 157641-4720

Tube assembly 157641-4020

Transfer pump pressure kPa 20 20 20

Transfer pump pressure kgf/cm2 0.2 0.2 0.2

Direction of rotation (viewed from drive side)
Right R

Governor adjustment

Pump speed r/min 1000 1000 1000

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Pump chamber pressure kPa 617.5 588 647

Pump chamber pressure kgf/cm2 6.3 6 6.6

Basic *

Governor adjustment_02

Pump speed r/min 100 100 100

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Pump chamber pressure kPa 294 294

Pump chamber pressure kgf/cm2 3 3

Governor adjustment_03

Pump speed r/min 1000 1000 1000

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Pump chamber pressure kPa 618 579 657

Pump chamber pressure kgf/cm2 6.3 5.9 6.7

Governor adjustment_04

Pump speed r/min 2000 2000 2000

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Pump chamber pressure kPa 755 706 804

Pump chamber pressure kgf/cm2 7.7 7.2 8.2

Boost compensator adjustment

Pump speed r/min 1000 1000 1000

TCV duty (%) F TCV 60Hz % 70 70 70

U alpha soll V 2.7 2.7 2.7

Timer stroke mm 4.1 3.9 4.3

Basic *

Boost compensator adjustment_02

Pump speed r/min 500 500 500

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Timer stroke mm 7.4 5.4 9.4

Boost compensator adjustment_03

Pump speed r/min 1000 1000 1000

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Timer stroke mm 8.1 6.1 10.1

Boost compensator adjustment_04

Pump speed r/min 1000 1000 1000

TCV duty (%) F TCV 60Hz % 70 70 70

U alpha soll V 2.7 2.7 2.7

Timer stroke mm 4.1 3.8 4.4

Boost compensator adjustment_05

Pump speed r/min 1000 1000 1000

TCV duty (%) F TCV 60Hz % 0 0 0

U alpha soll V 2.7 2.7 2.7

Timer stroke mm 0 0 0

Boost compensator adjustment_06

Pump speed r/min 1500 1500 1500

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Timer stroke mm 9.75 9.3 10.2

Speed control lever angle

Pump speed r/min 1000 1000 1000

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Overflow quantity cm3/min 600 470 730

0000000901

Pump speed r/min 1000 1000 1000

U alpha soll + dU alpha soll V 2.8 2.8 2.8

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 80.5 80 81

Difference in delivery mm3/st. 5

Basic *

_02

Pump speed r/min 375 375 375

U alpha soll + dU alpha soll V 1.89 1.89 1.89

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 7 4 10

Difference in delivery mm3/st. 2

Basic *

Remarks
Confirmation of difference in delivery

_03

Pump speed r/min 2500 2500 2500

U alpha soll + dU alpha soll V 1.66 1.66 1.66

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 16.1 13.6 18.6

Difference in delivery mm3/st. 5

Basic *

Remarks
Confirmation of difference in delivery

_04

Pump speed r/min 100 100 100

U alpha soll + dU alpha soll V 3.5 3.5 3.5

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 83.3 73.3 93.3

_05

Pump speed r/min 375 375 375

U alpha soll + dU alpha soll V 1.89 1.89 1.89

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 7 4 10

_06

Pump speed r/min 500 500 500

U alpha soll + dU alpha soll V 2.49 2.49 2.49

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 50.1 48.1 52.1

_07

Pump speed r/min 800 800 800

U alpha soll + dU alpha soll V 1.86 1.86 1.86

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 15.4 13.4 17.4

_08

Pump speed r/min 800 800 800

U alpha soll + dU alpha soll V 2.62 2.62 2.62

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 64.4 62.4 66.4

_09

Pump speed r/min 1000 1000 1000

U alpha soll + dU alpha soll V 1.85 1.85 1.85

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 16.6 14.6 18.6

_10

Pump speed r/min 1000 1000 1000

U alpha soll + dU alpha soll V 2.8 2.8 2.8

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 80.5 79.5 81.5

_11

Pump speed r/min 2000 2000 2000

U alpha soll + dU alpha soll V 2.58 2.58 2.58

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 63.7 61.7 65.7

_12

Pump speed r/min 2250 2250 2250

U alpha soll + dU alpha soll V 2.43 2.43 2.43

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 54.3 51.8 56.8

_13

Pump speed r/min 2500 2500 2500

U alpha soll + dU alpha soll V 1.66 1.66 1.66

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 16.1 13.6 18.6

_14

Pump speed r/min 2500 2500 2500

U alpha soll + dU alpha soll V 1 1 1

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity mm3/st. 3

Stop lever angle

Pump speed r/min 375 375 375

U alpha soll + dU alpha soll V 1.89 1.89 1.89

TCV duty (%) F TCV 60Hz % 0 0 0

Average injection quantity cm3/min 0 0 0

Stop lever angle_02

Pump speed r/min 2250 2250 2250

U alpha soll + dU alpha soll V 2.43 2.43 2.43

TCV duty (%) F TCV 60Hz % 100 100 100

Average injection quantity cm3/min 0 0 0

0000001101

Pump speed r/min 200 200 200

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.7 2.7 2.7

Speed output
N=Measure the actual speed. r/min N+-8

0000001201

Pump speed r/min 1000 1000 1000

TCV duty (%) F TCV 60Hz % 100 100 100

U alpha soll V 2.8 2.8 2.8

Temperature output
Measure T = actual output temperature degC T+-5

0000001301

Max. applied voltage V 8 8 8

Test voltage V 13 12 14

0000001401

K dimension mm 3.3 3.2 3.4

KF dimension mm 5.62 5.52 5.72

Pre-stroke mm 0.1 0.08 0.12

Test data Ex:

Injection timing adjustment Comp. resistor/voltage

Compensation resistance/compensation voltage comparison A = Compensation resistor number B= Compensation resistance C = Compensation voltage delta U alpha soll
----------

----------

0000001601 HARNESS & CONNECTOR

Connector and binder assembly specification (1)Install the connector as shown in the figure. (2)At the clip position at J (bracket's groove position), clip the F.C.V. harness and the G.E. harness together horizontally. (3)After clipping, the GE harness and the FCV harness must be within L1 from the pump flange face. A:P/U Connector B:F.C.V. connector, Q adjustment connector C:G.E. Connector D:Binder E:Q adjustment connector F:Bracket groove G:Clip position H:Push type clip I:T.C.V. Connector J:Position the GE harness and the FCV harness together horizontally. K:Pump flange face
----------

----------
L1=Max.207mm