Fuel injectors
  1. Home
  2. injection
  3. #1043043251

104304-3251 ZEXEL 9 400 616 507 BOSCH INJECTION-PUMP ASSEMBLY 9400616507 1043043251 131017270


104304-3251 INJECTION-PUMP ASSEMBLY
Rating:
82
Buy INJECTION-PUMP ASSEMBLY 104304-3251 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 507 9400616507
ZEXEL 104304-3251 1043043251
ISHIKAWAJIMA-S 131017270 131017270

Service parts 104304-3251 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 104300-4440
3. GOVERNOR
4. SUPPLY PUMP 105248-1071
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

104304-3251 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 507 9400616507
ZEXEL 104304-3251 1043043251
ISHIKAWAJIMA-S 131017270 131017270


Zexel num
Bosch num
Firm num
Name
104304-3251 
9 400 616 507 
131017270  ISHIKAWAJIMA-S
INJECTION-PUMP ASSEMBLY
T854B * K 14BX PES4K PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-3-4-2
Pre-stroke mm   1.95 1.9 2
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-3 deg.   90 89.5 90.5
Difference between angles 2
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 3
Cyl.1-2 deg.   270 269.5 270.5
Injection quantity adjustment
Adjusting point   A
Rack position   R1(10.1)
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   41 40 42
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   5+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   6 5 7
Max. variation between cylinders %   0 -14 14
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 104304-3251
N:Pump speed R:Rack position (mm) (1)Rack difference between N = N1 and N = N2
----------
N1=1300r/min N2=800r/min
----------

Speed control lever angle

Test data 104304-3251
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=21deg+-3deg b=28deg+-6deg

Stop lever angle

Test data 104304-3251
N:Pump normal S:Stop the pump.
----------

----------
a=10deg+2deg-5deg b=(38deg)




Have questions with 104304-3251?





Group cross 104304-3251 ZEXEL

Ishikawajima-S 

104304-3200  
9 400 616 503 
131017150 
INJECTION-PUMP ASSEMBLY
T854
104304-3210  
9 400 616 504 
131017170 
INJECTION-PUMP ASSEMBLY
T854
104304-3220  
9 400 616 505 
131017230 
INJECTION-PUMP ASSEMBLY
T854

Isuzu 

104304-3230  

104304-3270 
 
8941736011 
INJECTION-PUMP ASSEMBLY
4FA1

Ishikawajima-S 

104304-3240  
9 400 616 506 
131017260 
INJECTION-PUMP ASSEMBLY
T854BT
104304-3250  

104304-3251 
 
 
INJECTION-PUMP ASSEMBLY
T854B
104304-3251  
9 400 616 507 
131017270 
INJECTION-PUMP ASSEMBLY
T854B

Isuzu 

104304-3260  
9 400 616 508 
8941448541 
INJECTION-PUMP ASSEMBLY
4FA1
104304-3270  
 
8944463140 
INJECTION-PUMP ASSEMBLY
4FA1
Back to top