104303-3170 ZEXEL 9 400 610 174 BOSCH INJECTION-PUMP ASSEMBLY 9400610174 1043033170 131016522


104303-3170 INJECTION-PUMP ASSEMBLY
Rating:
26
Buy INJECTION-PUMP ASSEMBLY 104303-3170 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 174 9400610174
ZEXEL 104303-3170 1043033170
ISHIKAWAJIMA-S 131016522 131016522

Service parts 104303-3170 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 104300-3370
3. GOVERNOR
4. SUPPLY PUMP 105248-1071
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-1792
11. Nozzle and Holder 13140 60 62
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105071-0542
14. NOZZLE 105000-1600
15. NOZZLE SET

Include in #1:

104303-3170 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 174 9400610174
ZEXEL 104303-3170 1043033170
ISHIKAWAJIMA-S 131016522 131016522


Zexel num
Bosch num
Firm num
Name
104303-3170 
9 400 610 174 
131016522  ISHIKAWAJIMA-S
INJECTION-PUMP ASSEMBLY
LEM853 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-3
Pre-stroke mm   1.95 1.9 2
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 2
Cal 1-3
deg.   240 239.5 240.5
Injection quantity adjustment
Adjusting point   A
Rack position   7.8
Pump speed r/min   1000 1000 1000
Each cylinder's injection qty mm3/st.   33.5 32.5 34.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.1+-0.5
Pump speed r/min   350 350 350
Each cylinder's injection qty mm3/st.   6 5 7
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 104303-3170
N:Pump speed R:Rack position (mm) (1)Rack difference between N = N1 and N = N2
----------
N1=(1220)r/min N2=1000r/min
----------

Speed control lever angle

Test data 104303-3170
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=21deg+-3deg b=19deg+-6deg

Stop lever angle

Test data 104303-3170
N:Pump normal S:Stop the pump.
----------

----------
a=0deg+5deg b=(38deg)




Have questions with 104303-3170?





Group cross 104303-3170 ZEXEL

Toyo-Sha 

 
 
INJECTION-PUMP ASSEMBLY
3S200
9 400 616 459 
60915101001 
INJECTION-PUMP ASSEMBLY
3S200

Isuzu 

 
5156011480 
INJECTION-PUMP ASSEMBLY
3AB1
 
5156011481 
INJECTION-PUMP ASSEMBLY
3AB1

Ishikawajima-S 

9 400 616 460 
131016401 
INJECTION-PUMP ASSEMBLY
LEM853
104303-3170  
9 400 610 174 
131016522 
INJECTION-PUMP ASSEMBLY
LEM853
 
131016770 
INJECTION-PUMP ASSEMBLY
LEM853
 
131016870 
INJECTION-PUMP ASSEMBLY
LEM853
Back to top