104303-3050 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1043033050 131016521


104303-3050 INJECTION-PUMP ASSEMBLY
Rating:
15
Buy INJECTION-PUMP ASSEMBLY 104303-3050 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 104303-3050 1043033050
ISHIKAWAJIMA-S 131016521 131016521

Service parts 104303-3050 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 104300-3041
3. GOVERNOR
4. SUPPLY PUMP 105248-0160
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-1792
11. Nozzle and Holder 13140 60 62
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105071-0542
14. NOZZLE 105000-1600
15. NOZZLE SET

Include in #1:

104303-3050 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 104303-3050 1043033050
ISHIKAWAJIMA-S 131016521 131016521


Zexel num
Bosch num
Firm num
Name
104303-3050 
 
131016521  ISHIKAWAJIMA-S
INJECTION-PUMP ASSEMBLY
LEM853 * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-3
Pre-stroke mm   1.95 1.9 2
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 2
Cal 1-3
deg.   240 239.5 240.5
Injection quantity adjustment
Adjusting point   A
Rack position   7.8
Pump speed r/min   1000 1000 1000
Each cylinder's injection qty mm3/st.   33.5 32.5 34.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   5.1+-0.5
Pump speed r/min   350 350 350
Each cylinder's injection qty mm3/st.   6 5 7
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 104303-3050
N:Pump speed R:Rack position (mm) (1)Torque control stroke
----------

----------

Speed control lever angle

Test data 104303-3050
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=21deg+-3deg b=14deg+-6deg

Stop lever angle

Test data 104303-3050
N:Pump normal S:Stop the pump.
----------

----------
a=0deg+5deg b=(38deg)




Have questions with 104303-3050?





Group cross 104303-3050 ZEXEL

Ishikawajima-S 

 
131016320 
INJECTION-PUMP ASSEMBLY
LEM853

Toyo-Sha 

 
 
INJECTION-PUMP ASSEMBLY

Ishikawajima-S 

9 400 616 456 
131016400 
INJECTION-PUMP ASSEMBLY
LEM853

Toyo-Sha 

 
 

Ishikawajima-S 

104303-3050  
 
131016521 
INJECTION-PUMP ASSEMBLY
LEM853

Toyo-Sha 

 
 

3S150

Ishikawajima-S 

 
131016620 
INJECTION-PUMP ASSEMBLY
LEM853
9 400 613 125 
131016621 
INJECTION-PUMP ASSEMBLY
LEM853

Toyo-Sha 

9 400 616 457 
5001510101 
INJECTION-PUMP ASSEMBLY
3S150
9 400 616 458 
60115101001 
INJECTION-PUMP ASSEMBLY
3S139
Back to top