104303-2480 ZEXEL 9 400 610 313 BOSCH INJECTION-PUMP ASSEMBLY 9400610313 1043032480 5156014370


104303-2480 INJECTION-PUMP ASSEMBLY
Rating:
58
Buy INJECTION-PUMP ASSEMBLY 104303-2480 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 313 9400610313
ZEXEL 104303-2480 1043032480
ISUZU 5156014370 5156014370

Service parts 104303-2480 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 104300-3430
3. GOVERNOR
4. SUPPLY PUMP 105248-0110
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-1981
11. Nozzle and Holder 5-15300-110-2
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105071-1261
14. NOZZLE 105000-1010
15. NOZZLE SET

Include in #1:

104303-2480 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 610 313 9400610313
ZEXEL 104303-2480 1043032480
ISUZU 5156014370 5156014370


Zexel num
Bosch num
Firm num
Name
104303-2480 
9 400 610 313 
5156014370  ISUZU
INJECTION-PUMP ASSEMBLY
3AE1 * K 14BV PES3K PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-3-2
Pre-stroke mm   2.1 2.05 2.15
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 2
Cyl.1-2
deg.   240 239.5 240.5
Injection quantity adjustment
Adjusting point   A
Rack position   7.7
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   27.2 26.2 28.2
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.1+-0.5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   9 8 10
Max. variation between cylinders %   0 -14 14
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 
Injection quantity adjustment_03
Adjusting point   C
Rack position   13+1
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   37 37
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 104303-2480
N:Pump speed R:Rack position (mm) (1)Set the idle spring. (2)Main spring setting
----------

----------

Speed control lever angle

Test data 104303-2480
F:Full speed I:Idle S:Stop
----------

----------
a=15deg+-5deg b=40deg+-6deg c=50deg+-6deg

Timing setting

Test data 104303-2480
(1)Pump vertical direction (2)Position of gear mark 'Z' at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(120deg)




Have questions with 104303-2480?





Group cross 104303-2480 ZEXEL

Ishikawajima-S 

9 400 616 435 
131016971 
INJECTION-PUMP ASSEMBLY
H843T

Nissan-Diesel 

9 400 616 436 
16710Z7009 
INJECTION-PUMP ASSEMBLY
SD16
 
16710Z7010 
INJECTION-PUMP ASSEMBLY
SD16
9 400 616 437 
16712Z7004 
INJECTION-PUMP ASSEMBLY
SD16
 
16712Z7005 
INJECTION-PUMP ASSEMBLY
SD16

Ishikawajima-S 

 
131017050 
INJECTION-PUMP ASSEMBLY
H843
9 400 612 601 
131017051 
INJECTION-PUMP ASSEMBLY
H843

Nissan-Diesel 

 
16710Z7011 
INJECTION-PUMP ASSEMBLY
SD15T04

Ishikawajima-S 

 
131017070 
INJECTION-PUMP ASSEMBLY
H843

Isuzu 

104303-2480  
9 400 610 313 
5156014370 
INJECTION-PUMP ASSEMBLY
3AE1

Ishikawajima-S 

 
131017080 
INJECTION-PUMP ASSEMBLY
H843
Back to top