Fuel injectors
  1. Home
  2. injection
  3. #1043021050

104302-1050 ZEXEL 9 400 612 118 BOSCH INJECTION-PUMP ASSEMBLY 9400612118 1043021050 2336310300


104302-1050 INJECTION-PUMP ASSEMBLY
Rating:
24
Buy INJECTION-PUMP ASSEMBLY 104302-1050 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 612 118 9400612118
ZEXEL 104302-1050 1043021050
FUJI-HEAVY 2336310300 2336310300

Service parts 104302-1050 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 104300-5160
3. GOVERNOR
4. SUPPLY PUMP
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105141-2321
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 11.8{120}
13. NOZZLE-HOLDER 105071-1470
14. NOZZLE 105000-1740
15. NOZZLE SET

Include in #1:

104302-1050 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 612 118 9400612118
ZEXEL 104302-1050 1043021050
FUJI-HEAVY 2336310300 2336310300


Zexel num
Bosch num
Firm num
Name
104302-1050 
9 400 612 118 
2336310300  FUJI-HEAVY
INJECTION-PUMP ASSEMBLY
DW670 K 14BT INJECTION PUMP ASSY PES2K PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-2
Pre-stroke mm   2.1 2.05 2.15
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cyl.1-2 deg.   180 179.5 180.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.2
Pump speed r/min   1800 1800 1800
Average injection quantity mm3/st.   19.6 18.6 20.6
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   7.2+-0.5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   8 6.7 9.3
Max. variation between cylinders %   0 -13 13
Fixing the lever   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  
Injection quantity adjustment_03
Adjusting point   C
Rack position   13+1
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   28 28
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 104302-1050
N:Pump speed R:Rack position (mm) (1)Tolerance for racks not indicated: +-0.05mm.
----------

----------

Speed control lever angle

Test data 104302-1050
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=34deg+-6deg b=20deg+-3deg

Stop lever angle

Test data 104302-1050
N:Pump normal S:Stop the pump. (1)Use the hole at R = aa
----------
aa=35mm
----------
a=(38deg) b=19deg+-5deg

Timing setting

Test data 104302-1050
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 104302-1050?





Group cross 104302-1050 ZEXEL

104302-1000  
 
 
INJECTION-PUMP ASSEMBLY
KDL20
104302-1010  
 
 
INJECTION-PUMP ASSEMBLY
KDL20

Fuji-Heavy 

104302-1020  
9 400 616 406 
 
INJECTION-PUMP ASSEMBLY
DW67
104302-1020  
9 400 616 406 
2336310100 
INJECTION-PUMP ASSEMBLY
DW67
104302-1030  
9 400 616 407 
 
INJECTION-PUMP ASSEMBLY
DW67
104302-1040  
9 400 616 408 
DW670J1623 
INJECTION-PUMP ASSEMBLY
DW67
104302-1050  
9 400 612 118 
2336310300 
INJECTION-PUMP ASSEMBLY
DW670
Back to top