103672-0350 ZEXEL 9 400 616 343 BOSCH INJECTION-PUMP ASSEMBLY 9400616343 1036720350 74v47000a

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 103672-0350 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 343 9400616343

ZEXEL 103672-0350 1036720350

NIIGATA-TEKKOU 74V47000A 74v47000a

Service parts 103672-0350 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 103067-8170

3. GOVERNOR 105455-0730

4. SUPPLY PUMP 105235-1860

5. AUTOM. ADVANCE MECHANIS

6. COUPLING PLATE

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY

11. Nozzle and Holder

12. Open Pre:MPa(Kqf/cm2) 12.7{130}

13. NOZZLE-HOLDER 105041-3010

14. NOZZLE 105000-1040

15. NOZZLE SET

Include in #1:

103672-0350 as INJECTION-PUMP ASSEMBLY

106873-2172 as _

Cross reference number

BOSCH 9 400 616 343 9400616343

ZEXEL 103672-0350 1036720350

NIIGATA-TEKKOU 74V47000A 74v47000a

Zexel num

Bosch num

Firm num

Name

103672-0350

9 400 616 343

74V47000A NIIGATA-TEKKOU

INJECTION-PUMP ASSEMBLY
6NSD K 14BS INJECTION PUMP ASSY PE4-8Z PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 10578-8130

Bosch type code EFEP215A

Nozzle 105780-0050

Bosch type code DN6TD119NP1T

Nozzle holder 105780-2090

Bosch type code EFEP215

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 8-4-1500

Overflow valve 131425-0120

Overflow valve opening pressure kPa 157 157 157

Overflow valve opening pressure kgf/cm2 1.6 1.6 1.6

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Left L

Injection timing adjustment

Direction of rotation (viewed from drive side)
Left L

Injection order 6-3-5-1- 4-2

Pre-stroke mm 3 2.95 3.05

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 6-3 deg. 60 59.5 60.5

Difference between angles 2
Cal 6-5 deg. 120 119.5 120.5

Difference between angles 3
Cal 6-1 deg. 180 179.5 180.5

Difference between angles 4
Cal 6-4 deg. 240 239.5 240.5

Difference between angles 5
Cal 6-2 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point A

Rack position 14.3

Pump speed r/min 750 750 750

Average injection quantity mm3/st. 523 508 538

Max. variation between cylinders % 0 -2 2

Basic *

Fixing the rack *

Injection quantity adjustment_02

Adjusting point B

Rack position 6.7+-0.5

Pump speed r/min 250 250 250

Average injection quantity mm3/st. 41.5 38 45

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Delivered with idle spring not operating. (3)RACK LIMIT: RAL
----------
K=19 RAL=21+1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=18deg+-5deg b=(30deg)+-5deg

Stop lever angle

N:Pump normal S:Stop the pump.
----------

----------
a=35deg+-5deg b=10deg+-5deg

Timing setting

(1)Pump vertical direction (2)Center of coupling's elongated hole at No. 6 cylinder's beginning of injection. (3)- (4)-
----------

----------
a=(50deg)