103662-1750 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1036621750 0429110770


103662-1750 INJECTION-PUMP ASSEMBLY
Rating:
62
Buy INJECTION-PUMP ASSEMBLY 103662-1750 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 103662-1750 1036621750
MITSUBISHI-HEAV 0429110770 0429110770

Cross reference number

ZEXEL 103662-1750 1036621750
MITSUBISHI-HEAV 0429110770 0429110770


Zexel num
Bosch num
Firm num
Name
103662-1750 
 
0429110770  MITSUBISHI-HEAV
INJECTION-PUMP ASSEMBLY
S6N *

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105011-9210
Nozzle holder   105043-3000
Opening pressure MPa   34.3
Opening pressure kgf/cm2   350
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2.4-1124
Overflow valve   132424-0620
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left
  L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left
  L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   2.05 2 2.1
Rack position
Point A
  R=A
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   14
Pump speed r/min   450 450 450
Average injection quantity mm3/st.   400 390 410
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10
Pump speed r/min   450 450 450
Average injection quantity mm3/st.   240 228 252
Max. variation between cylinders %   0 -5 5
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   7+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   68 61.2 74.8
Max. variation between cylinders %   0 -10 10
Fixing the rack   *

Test data Ex:

Governor adjustment

Test data 103662-1750
N:Pump speed R:Rack position (mm) (1)RACK LIMIT
----------

----------

Speed control lever angle

Test data 103662-1750
F:Full speed I:Idle (1)Stopper bolt setting
----------

----------
a=41deg+-5deg b=66deg+-3deg




Have questions with 103662-1750?





Group cross 103662-1750 ZEXEL

Mitsubishi-Heav 

 
 

12DM
 
 
INJECTION-PUMP ASSEMBLY
12DM
 
0429110720 
INJECTION-PUMP ASSEMBLY
S6N

Niigata-Urawa 

 
41647120A 
INJECTION-PUMP ASSEMBLY
6L16X

Mitsubishi-Heav 

103662-1750  
 
0429110770 
INJECTION-PUMP ASSEMBLY
S6N
 
0429110700 
INJECTION-PUMP ASSEMBLY
S6N
 
0429110740 
INJECTION-PUMP ASSEMBLY
S6N
 
 

DMF31
 
0429110880 
INJECTION-PUMP ASSEMBLY
S12N
Back to top