Fuel injectors
  1. Home
  2. injection
  3. #1026721300

102672-1300 ZEXEL 9 400 616 251 BOSCH INJECTION-PUMP ASSEMBLY 9400616251 1026721300


102672-1300 INJECTION-PUMP ASSEMBLY
Rating:
26
Buy INJECTION-PUMP ASSEMBLY 102672-1300 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 251 9400616251
ZEXEL 102672-1300 1026721300

Service parts 102672-1300 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 102067-9060
3. GOVERNOR 105443-0170
4. SUPPLY PUMP 105222-1170
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2)
13. NOZZLE-HOLDER
14. NOZZLE
15. NOZZLE SET

Include in #1:

102672-1300 as INJECTION-PUMP ASSEMBLY
107691-2080 as _
107691-2083
107691-2085
107691-2086

Cross reference number

BOSCH 9 400 616 251 9400616251
ZEXEL 102672-1300 1026721300


Zexel num
Bosch num
Firm num
Name
102672-1300 
9 400 616 251 
   
INJECTION-PUMP ASSEMBLY
DMF15H K 14BQ INJECTION PUMP ASSY PE3-8B PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle   105000-1130
Bosch type code   DN4SD24
Nozzle holder   105031-2010
Bosch type code   KB56SD273
Opening pressure MPa   11.8
Opening pressure kgf/cm2   120
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-1.6-550
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Left   L
Injection timing adjustment
Direction of rotation (viewed from drive side)
Left   L
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.35 3.3 3.4
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   12.6
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   178 172.5 183.5
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   13.4
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   196 188 204
Max. variation between cylinders %   0 -4 4
Fixing the lever   *
Injection quantity adjustment_03
Adjusting point   C
Rack position   7.9+-0.5
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   65 59 71
Max. variation between cylinders %   0 -10 10
Fixing the lever   *

Test data Ex:

Governor adjustment

Test data 102672-1300
N:Pump speed R:Rack position (mm) (1)Move the stop lever to the full side and fix. Then, adjust the governor. (2)When the stop lever has been freed, confirm non-injection. (3)RACK LIMIT: RAL
----------
RAL=13.5+0.5mm
----------

Speed control lever angle

Test data 102672-1300
(1)Pump speed = aa (2)Pump speed = bb
----------
aa=900r/min bb=500r/min
----------
a=11deg+-5deg b=(12deg)

Stop lever angle

Test data 102672-1300
S:Stop the pump. (1)At the stopping, the lever must always be in the stop position.
----------

----------
a=(19deg) b=(34deg)




Have questions with 102672-1300?





Group cross 102672-1300 ZEXEL

102672-1300  
9 400 616 251 
 
INJECTION-PUMP ASSEMBLY
DMF15H

Niigata-Urawa 

102672-1350  
 
 
INJECTION-PUMP ASSEMBLY
6L16
102672-1360  
9 400 616 252 
41047010C 
INJECTION-PUMP ASSEMBLY
6L16
102672-1370  
9 400 616 253 
 
INJECTION-PUMP ASSEMBLY
DMF15H

Niigata-Urawa 

102672-1390  
 
40947000B 
INJECTION-PUMP ASSEMBLY
6L16
Back to top