Fuel injectors
  1. Home
  2. injection
  3. #1018931000

101893-1000 ZEXEL 9 400 616 229 BOSCH INJECTION-PUMP ASSEMBLY 9400616229 1018931000 3126144010


101893-1000 INJECTION-PUMP ASSEMBLY
Rating:
43
Buy INJECTION-PUMP ASSEMBLY 101893-1000 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 229 9400616229
ZEXEL 101893-1000 1018931000
MITSUBISHI 3126144010 3126144010

Service parts 101893-1000 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101089-0470
3. GOVERNOR 105490-3950
4. SUPPLY PUMP 105210-1931
5. AUTOM. ADVANCE MECHANIS 105612-2060
6. COUPLING PLATE 105662-4130
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105151-1330
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 11.8(120)
13. NOZZLE-HOLDER 105081-2140
14. NOZZLE 105000-1130
15. NOZZLE SET

Include in #1:

101602-1221 as _
101893-1000 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 229 9400616229
ZEXEL 101893-1000 1018931000
MITSUBISHI 3126144010 3126144010


Zexel num
Bosch num
Firm num
Name
101893-1000 
9 400 616 229 
3126144010  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC20 K 14BG INJECTION PUMP ASSY PE8A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   2.2 2.15 2.25
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cyl.1-2 deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7 deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3 deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5 deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6 deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8 deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   B
Rack position   12.3
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   111.5 108 115
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   C
Rack position   10.5
Pump speed r/min   800 800 800
Average injection quantity mm3/st.   86.4 81.9 90.9
Max. variation between cylinders %   0 -5 5
Fixing the rack   *
Injection quantity adjustment_03
Adjusting point   D
Rack position   6.3+-0.5
Pump speed r/min   200 200 200
Average injection quantity mm3/st.   12.4 9.8 15
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Injection quantity adjustment_04
Adjusting point   A
Rack position   -
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   110 106.5 113.5
Fixing the lever   *
Timer adjustment
Pump speed r/min   250
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   350
Advance angle deg.   1.1
Timer adjustment_03
Pump speed r/min   500
Advance angle deg.   1.4 0.9 1.9
Timer adjustment_04
Pump speed r/min   800
Advance angle deg.   4.9 4.4 5.4
Timer adjustment_05
Pump speed r/min   1100
Advance angle deg.   8 7.5 8.5
Timer adjustment_06
Pump speed r/min   1200
Advance angle deg.   9 9 10.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 101893-1000
N:Pump speed R:Rack position (mm) (1)Beginning of damper spring operation: DL (2)RACK LIMIT: RAL
----------
DL=5.5-0.2mm RAL=12.5+0.2mm
----------

0000000901

Test data 101893-1000
F:Full load I:Idle S:Stop
----------

----------
a=11deg+-5deg b=41deg+-3deg c=10deg+-3deg

0000001501 MICRO SWITCH

Adjustment of the micro-switch Adjust the bolt to obtain the following lever position when the micro-switch is ON. (1)Speed N1 (2)Rack position Ra
----------
N1=325+10r/min Ra=6.3mm
----------




Have questions with 101893-1000?





Group cross 101893-1000 ZEXEL

Mitsubishi 

101893-1000  
9 400 616 229 
3126144010 
INJECTION-PUMP ASSEMBLY
8DC20
101893-1010  
 
3126187010 
INJECTION-PUMP ASSEMBLY
8DC20
101893-1020  
 
ME068604 
INJECTION-PUMP ASSEMBLY
8DC60
101893-1030  
 
ME066210 

8DC61
101893-1040  
9 400 616 230 
ME068667 
INJECTION-PUMP ASSEMBLY
8DC6
101893-1050  
9 400 616 231 
ME066782 
INJECTION-PUMP ASSEMBLY
8DC6
Back to top