101803-1690 ZEXEL 9 400 616 211 BOSCH INJECTION-PUMP ASSEMBLY 9400616211 1018031690 me069097


101803-1690 INJECTION-PUMP ASSEMBLY
Rating:
10
Buy INJECTION-PUMP ASSEMBLY 101803-1690 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 211 9400616211
ZEXEL 101803-1690 1018031690
MITSUBISHI ME069097 me069097

Service parts 101803-1690 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101080-0860
3. GOVERNOR 105412-1940
4. SUPPLY PUMP 105210-4150
5. AUTOM. ADVANCE MECHANIS 105634-0130
6. COUPLING PLATE 105663-0260
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4760
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-3521
14. NOZZLE 105015-4370
15. NOZZLE SET

Include in #1:

101803-1690 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 211 9400616211
ZEXEL 101803-1690 1018031690
MITSUBISHI ME069097 me069097


Zexel num
Bosch num
Firm num
Name
101803-1690 
9 400 616 211 
ME069097  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC8 K 14BH INJECTION PUMP ASSY PE8AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position
Governor side
  NO.1
Difference between angles 1
Cyl.1-2
deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7
deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3
deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4
deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5
deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6
deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8
deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   7.7
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   104.6 101.1 108.1
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.3+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   18 15.4 20.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   550--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   800
Advance angle deg.   1.6 1.1 2.1
Timer adjustment_04
Pump speed r/min   1100
Advance angle deg.   4 3.5 4.5
Timer adjustment_05
Pump speed r/min   -
Advance angle deg.   6.5 6.5 6.5
Remarks
Measure the actual speed, stop
 

Test data Ex:

Governor adjustment

Test data 101803-1690
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT not operating. (4)Torque spring does not operate. (5)Rack difference between N = N1 and N = N2 (6)At shipping (7)Idle sub spring setting: L1. (8)The torque control spring must does not have a set force.
----------
K=15 N1=900r/min N2=500r/min L1=4.5-0.5mm
----------

Speed control lever angle

Test data 101803-1690
F:Full speed I:Idle S:Stop (1)Pump speed = aa (2)At shipping (3)Pump speed = bb
----------
aa=1120r/min bb=910r/min
----------
a=26deg+-5deg b=32deg+-3deg c=11deg+-5deg d=(2deg) e=8deg+-5deg

Stop lever angle

Test data 101803-1690
N:Pump normal S:Stop the pump. (1)Normal
----------

----------
a=19deg+-5deg b=46deg+-5deg

Timing setting

Test data 101803-1690
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 101803-1690?





Group cross 101803-1690 ZEXEL

Mitsubishi 

9 400 616 205 
ME068620 
INJECTION-PUMP ASSEMBLY
8DC81
 
ME068692 
INJECTION-PUMP ASSEMBLY
8DC90C
9 400 616 206 
ME069655 
INJECTION-PUMP ASSEMBLY
8DC90
9 400 616 207 
ME069657 
INJECTION-PUMP ASSEMBLY
8DC9
9 400 616 208 
ME069710 
INJECTION-PUMP ASSEMBLY
8DC90
 
ME069738 
INJECTION-PUMP ASSEMBLY
8DC81
9 400 616 209 
ME069795 
INJECTION-PUMP ASSEMBLY
8DC81
9 400 616 210 
ME069081 
INJECTION-PUMP ASSEMBLY
8DC8
101803-1690  
9 400 616 211 
ME069097 
INJECTION-PUMP ASSEMBLY
8DC8
Back to top