Fuel injectors
  1. Home
  2. injection
  3. #1018031630

101803-1630 ZEXEL 9 400 616 206 BOSCH INJECTION-PUMP ASSEMBLY 9400616206 1018031630 me069655


101803-1630 INJECTION-PUMP ASSEMBLY
Rating:
84
Buy INJECTION-PUMP ASSEMBLY 101803-1630 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 206 9400616206
ZEXEL 101803-1630 1018031630
MITSUBISHI ME069655 me069655

Service parts 101803-1630 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101080-0450
3. GOVERNOR 105412-1840
4. SUPPLY PUMP 105210-4470
5. AUTOM. ADVANCE MECHANIS 105614-4240
6. COUPLING PLATE 105662-0570
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105100-4761
11. Nozzle and Holder 31261-30020
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-3522
14. NOZZLE 105015-4370
15. NOZZLE SET

Include in #1:

101603-6470 as _
101803-1630 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 206 9400616206
ZEXEL 101803-1630 1018031630
MITSUBISHI ME069655 me069655


Zexel num
Bosch num
Firm num
Name
101803-1630 
9 400 616 206 
ME069655  MITSUBISHI
INJECTION-PUMP ASSEMBLY
8DC90 K 14BH INJECTION PUMP ASSY PE8AD PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-2-7-3- 4-5-6-8
Pre-stroke mm   4.5 4.45 4.55
Beginning of injection position
Governor side   NO.1
Difference between angles 1
Cyl.1-2 deg.   45 44.5 45.5
Difference between angles 2
Cal 1-7 deg.   90 89.5 90.5
Difference between angles 3
Cal 1-3 deg.   135 134.5 135.5
Difference between angles 4
Cal 1-4 deg.   180 179.5 180.5
Difference between angles 5
Cal 1-5 deg.   225 224.5 225.5
Difference between angles 6
Cal 1-6 deg.   270 269.5 270.5
Difference between angles 7
Cal 1-8 deg.   315 314.5 315.5
Injection quantity adjustment
Adjusting point   A
Rack position   8.4
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   115.4 111.9 118.9
Max. variation between cylinders %   0 -3 3
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   6.5+-0.5
Pump speed r/min   250 250 250
Average injection quantity mm3/st.   15 12.4 17.6
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Timer adjustment
Pump speed r/min   500
Advance angle deg.   0.5
Timer adjustment_02
Pump speed r/min   1100
Advance angle deg.   4.2 3.7 4.7
Timer adjustment_03
Pump speed r/min   -
Advance angle deg.   6.5 6.5 6.5
Remarks
Measure the actual speed, stop  

Test data Ex:

Governor adjustment

Test data 101803-1630
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT not operating. (3)Rack difference between N = N1 and N = N2 (4)Supplied with torque spring not set. (5)At shipping
----------
K=14 N1=900r/min N2=450r/min
----------

Speed control lever angle

Test data 101803-1630
F:Full speed I:Idle S:Stop (1)At shipping
----------

----------
a=29deg+-5deg b=32deg+-3deg c=15deg+-5deg d=(2deg)

Stop lever angle

Test data 101803-1630
N:Pump normal S:Stop the pump.
----------

----------
a=19deg+-5deg b=46deg+-5deg

Timing setting

Test data 101803-1630
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(40deg)




Have questions with 101803-1630?





Group cross 101803-1630 ZEXEL

Mitsubishi 

101803-1611  

101803-1680 
9 400 616 205 
ME068620 
INJECTION-PUMP ASSEMBLY
8DC81
101803-1620  
 
ME068692 
INJECTION-PUMP ASSEMBLY
8DC90C
101803-1630  
9 400 616 206 
ME069655 
INJECTION-PUMP ASSEMBLY
8DC90
101803-1640  
9 400 616 207 
ME069657 
INJECTION-PUMP ASSEMBLY
8DC9
101803-1650  

101803-1710 
9 400 616 208 
ME069710 
INJECTION-PUMP ASSEMBLY
8DC90
101803-1660  
 
ME069738 
INJECTION-PUMP ASSEMBLY
8DC81
101803-1670  

101803-1690 
9 400 616 209 
ME069795 
INJECTION-PUMP ASSEMBLY
8DC81
101803-1680  
9 400 616 210 
ME069081 
INJECTION-PUMP ASSEMBLY
8DC8
101803-1690  
9 400 616 211 
ME069097 
INJECTION-PUMP ASSEMBLY
8DC8
Back to top