101696-9640 ZEXEL 9 400 610 813 BOSCH INJECTION-PUMP ASSEMBLY 9400610813 1016969640 16713z6672

Information Cross number Calibration Data Calibration Data Ex

Price: query
Buy now
Add to cart Go to cart

Rating:

Buy INJECTION-PUMP ASSEMBLY 101696-9640 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 610 813 9400610813

ZEXEL 101696-9640 1016969640

NISSAN-DIESEL 16713Z6672 16713z6672

Service parts 101696-9640 INJECTION-PUMP ASSEMBLY:

1. _

2. FUEL INJECTION PUMP 101069-5050

3. GOVERNOR 105921-9060

4. SUPPLY PUMP

105220-7010

5. AUTOM. ADVANCE MECHANIS 105672-0290

6. COUPLING PLATE 105662-1380

7. COUPLING PLATE

8. _

9. _

10. NOZZLE AND HOLDER ASSY 105101-6740

11. Nozzle and Holder 16600-Z5607

12. Open Pre:MPa(Kqf/cm2) 19.6{200}

13. NOZZLE-HOLDER 105031-4650

14. NOZZLE 105015-9170

15. NOZZLE SET

Include in #1:

101696-9640 as INJECTION-PUMP ASSEMBLY

106673-2560 as _

Cross reference number

BOSCH 9 400 610 813 9400610813

ZEXEL 101696-9640 1016969640

NISSAN-DIESEL 16713Z6672 16713z6672

Zexel num

Bosch num

Firm num

Name

101696-9640

9 400 610 813

16713Z6672 NISSAN-DIESEL

INJECTION-PUMP ASSEMBLY
FE6T * K 14BF PE6AD PE

Calibration Data:

Adjustment conditions

Test oil
1404 Test oil ISO4113 or {SAEJ967d}

Test oil temperature degC 40 40 45

Nozzle and nozzle holder 105780-8140

Bosch type code EF8511/9A

Nozzle 105780-0000

Bosch type code DN12SD12T

Nozzle holder 105780-2080

Bosch type code EF8511/9

Opening pressure MPa 17.2

Opening pressure kgf/cm2 175

Injection pipe
Outer diameter - inner diameter - length (mm) mm 6-2-600

Overflow valve 134424-1520

Overflow valve opening pressure kPa 162 147 177

Overflow valve opening pressure kgf/cm2 1.65 1.5 1.8

Tester oil delivery pressure kPa 157 157 157

Tester oil delivery pressure kgf/cm2 1.6 1.6 1.6

Direction of rotation (viewed from drive side)
Right R

Injection timing adjustment

Direction of rotation (viewed from drive side)
Right R

Injection order 1-4-2-6- 3-5

Pre-stroke mm 3.9 3.85 3.95

Beginning of injection position
Drive side NO.1

Difference between angles 1
Cal 1-4 deg. 60 59.5 60.5

Difference between angles 2
Cyl.1-2 deg. 120 119.5 120.5

Difference between angles 3
Cal 1-6 deg. 180 179.5 180.5

Difference between angles 4
Cal 1-3 deg. 240 239.5 240.5

Difference between angles 5
Cal 1-5 deg. 300 299.5 300.5

Injection quantity adjustment

Adjusting point -

Rack position 13.6

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 92.5 90.5 94.5

Max. variation between cylinders % 0 -3.5 3.5

Basic *

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_02

Adjusting point H

Rack position 9.5+-0.5

Pump speed r/min 275 275 275

Average injection quantity mm3/st. 11.5 9.7 13.3

Max. variation between cylinders % 0 -10 10

Fixing the rack *

Standard for adjustment of the maximum variation between cylinders *

Injection quantity adjustment_03

Adjusting point A

Rack position R1(13.6)

Pump speed r/min 700 700 700

Average injection quantity mm3/st. 92.5 91.5 93.5

Basic *

Fixing the lever *

Boost pressure kPa 28.7 28.7

Boost pressure mmHg 215 215

Injection quantity adjustment_04

Adjusting point B

Rack position R1+0.05

Pump speed r/min 1400 1400 1400

Average injection quantity mm3/st. 97 93.8 100.2

Fixing the lever *

Boost pressure kPa 28.7 28.7

Boost pressure mmHg 215 215

Injection quantity adjustment_05

Adjusting point C

Rack position R2(R1-0. 2)

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 77.5 74.3 80.7

Fixing the lever *

Boost pressure kPa 28.7 28.7

Boost pressure mmHg 215 215

Injection quantity adjustment_06

Adjusting point D

Rack position R2-1.5

Pump speed r/min 400 400 400

Average injection quantity mm3/st. 50.5 48.5 52.5

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Injection quantity adjustment_07

Adjusting point I

Rack position -

Pump speed r/min 150 150 150

Average injection quantity mm3/st. 100 100 120

Fixing the lever *

Boost pressure kPa 0 0 0

Boost pressure mmHg 0 0 0

Rack limit *

Boost compensator adjustment

Pump speed r/min 400 400 400

Rack position R2-1.5

Boost pressure kPa 6.7 5.4 8

Boost pressure mmHg 50 40 60

Boost compensator adjustment_02

Pump speed r/min 400 400 400

Rack position R2(R1-0. 2)

Boost pressure kPa 15.3 15.3 15.3

Boost pressure mmHg 115 115 115

Timer adjustment

Pump speed r/min 1170--

Advance angle deg. 0 0 0

Remarks
Start

Timer adjustment_02

Pump speed r/min 1120

Advance angle deg. 0.5

Timer adjustment_03

Pump speed r/min 1400

Advance angle deg. 3 2.5 3.5

Remarks
Finish

Test data Ex:

Governor adjustment

N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL
----------
T1=M24 BCL=1.5+-0.1mm
----------

Speed control lever angle

F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt setting
----------
aa=36mm
----------
a=26.5deg+-5deg b=39deg+-3deg

Stop lever angle

N:Pump normal S:Stop the pump. (1)Use the pin at R = aa
----------
aa=42mm
----------
a=40deg+-5deg b=27deg+-5deg

Timing setting

(1)Pump vertical direction (2)Position of timer's threaded hole at the No. 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)