101695-3611 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016953611


101695-3611 INJECTION-PUMP ASSEMBLY
Rating:
11
Buy INJECTION-PUMP ASSEMBLY 101695-3611 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101695-3611 1016953611

Service parts 101695-3611 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-9440
3. GOVERNOR 105400-7631
4. SUPPLY PUMP 105220-5610
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4160
11. Nozzle and Holder 6206-11-3100
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105048-3060
14. NOZZLE 105017-0140
15. NOZZLE SET

Include in #1:

101695-3611 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101695-3611 1016953611


Zexel num
Bosch num
Firm num
Name
101695-3611 
 
   
INJECTION-PUMP ASSEMBLY

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   9.2
Pump speed r/min   1175 1175 1175
Average injection quantity mm3/st.   31.7 30.7 32.7
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   E
Rack position   15+0.2
Pump speed r/min   100 100 100
Average injection quantity mm3/st.   66 56 76
Fixing the lever   *
Rack limit   *

Test data Ex:

Governor adjustment

Test data 101695-3611
N:Pump speed R:Rack position (mm) (1)Notch fixed: K (2)RACK LIMIT: RAL (3)Rack difference between N = N1 and N = N2 (4)Rack difference between N = N3 and N = N4
----------
K=20 RAL=15+0.2mm N1=1175r/min N2=650r/min N3=1175r/min N4=400r/min
----------

Speed control lever angle

Test data 101695-3611
F:Full speed I:Idle S:Stop
----------

----------
a=(26deg)+-5deg b=32deg+-3deg c=(27deg)+-5deg

Stop lever angle

Test data 101695-3611
N:Pump normal S:Stop the pump.
----------

----------
a=26.5deg+-5deg b=53deg+-5deg

Timing setting

Test data 101695-3611
(1)Pump vertical direction (2)Position of key groove at No 1 cylinder's beginning of injection (3)Stamp aligning marks on the pump housing flange. (4)-
----------

----------
a=59deg36min+-3deg b=0deg24min+-30min




Have questions with 101695-3611?





Group cross 101695-3611 ZEXEL

Komatsu 

F 019 Z10 184 
6206711730 
INJECTION-PUMP ASSEMBLY
6D95L
 
 
INJECTION-PUMP ASSEMBLY
101695-3611  
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 616 120 
6206711530 
INJECTION-PUMP ASSEMBLY
6D95L
F 019 Z10 615 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 616 121 
6206711252 
INJECTION-PUMP ASSEMBLY
6D95L
 
 
INJECTION-PUMP ASSEMBLY
 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 610 338 
6206711540 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 611 834 
6206711921 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 616 122 
6206711912 
INJECTION-PUMP ASSEMBLY
6D95L
9 400 616 123 
6207711812 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 611 612 
6207711911 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 611 269 
6207711931 
INJECTION-PUMP ASSEMBLY
S6D95L
 
6207711970 
INJECTION-PUMP ASSEMBLY
S6D95L
Back to top