Fuel injectors
  1. Home
  2. injection
  3. #1016953330

101695-3330 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016953330 6206711271


101695-3330 INJECTION-PUMP ASSEMBLY
Rating:
59
Buy INJECTION-PUMP ASSEMBLY 101695-3330 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101695-3330 1016953330
KOMATSU 6206711271 6206711271

Cross reference number

ZEXEL 101695-3330 1016953330
KOMATSU 6206711271 6206711271


Zexel num
Bosch num
Firm num
Name
101695-3330 
 
6206711271  KOMATSU
INJECTION-PUMP ASSEMBLY
6D95L * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-5 deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   10.4
Pump speed r/min   1050 1050 1050
Average injection quantity mm3/st.   34.8 33.8 35.8
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   B
Rack position   10.5+-0. 5
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   10.5 9.5 11.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.  

Test data Ex:

Governor adjustment

Test data 101695-3330
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)The torque control spring must does not have a set force. (4)Rack difference between N = N1 and N = N2
----------
K=14 RAL=15+0.2mm N1=1050r/min N2=700r/min
----------

Speed control lever angle

Test data 101695-3330
F:Full speed I:Idle S:Stop
----------

----------
a=11deg+-5deg b=32deg+-3deg c=20deg+-5deg

Timing setting

Test data 101695-3330
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 101695-3330?





Group cross 101695-3330 ZEXEL

Komatsu 

101695-3300  
9 400 616 103 
6206711221 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3310  
 
6206711281 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3320  
9 400 616 104 
6206711241 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3330  
 
6206711271 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3340  
9 400 616 105 
6206711335 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3350  

101695-3351 
F 019 Z10 614 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

101695-3351  
9 400 616 106 
6206711361 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3360  
9 400 616 107 
6206711342 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3370  
9 400 616 108 
6206711311 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3380  
9 400 616 109 
6206711110 
INJECTION-PUMP ASSEMBLY
6D95L
101695-3390  
9 400 616 110 
6206711130 
INJECTION-PUMP ASSEMBLY
6D95L
Back to top