101695-3010 ZEXEL 9 400 616 088 BOSCH INJECTION-PUMP ASSEMBLY 9400616088 1016953010 6207711243


101695-3010 INJECTION-PUMP ASSEMBLY
Rating:
18
Buy INJECTION-PUMP ASSEMBLY 101695-3010 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

BOSCH 9 400 616 088 9400616088
ZEXEL 101695-3010 1016953010
KOMATSU 6207711243 6207711243

Service parts 101695-3010 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-3890
3. GOVERNOR 105400-6630
4. SUPPLY PUMP 105220-5610
5. AUTOM. ADVANCE MECHANIS
6. COUPLING PLATE 105661-0450
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105118-4110
11. Nozzle and Holder
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105048-3060
14. NOZZLE 105017-0090
15. NOZZLE SET

Include in #1:

101695-3010 as INJECTION-PUMP ASSEMBLY

Cross reference number

BOSCH 9 400 616 088 9400616088
ZEXEL 101695-3010 1016953010
KOMATSU 6207711243 6207711243


Zexel num
Bosch num
Firm num
Name
101695-3010 
9 400 616 088 
6207711243  KOMATSU
INJECTION-PUMP ASSEMBLY
S6D95L K 14BE INJECTION PUMP ASSY PE6A PE

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-5-3-6- 2-4
Pre-stroke mm   3.6 3.55 3.65
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-5
deg.   60 59.5 60.5
Difference between angles 2
Cal 1-3
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cyl.1-2
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-4
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   A
Rack position   11.2
Pump speed r/min   950 950 950
Average injection quantity mm3/st.   44.5 43.5 45.5
Max. variation between cylinders %   0 -2.5 2.5
Basic   *
Fixing the lever   *
Injection quantity adjustment_02
Adjusting point   -
Rack position   10.4+-0. 5
Pump speed r/min   425 425 425
Average injection quantity mm3/st.   12.5 11.5 13.5
Max. variation between cylinders %   0 -15 15
Fixing the rack   *
Remarks
Adjust only variation between cylinders; adjust governor according to governor specifications.
 

Test data Ex:

Governor adjustment

Test data 101695-3010
N:Pump speed R:Rack position (mm) (1)Target notch: K (2)RACK LIMIT: RAL (3)Rack difference between N = N1 and N = N2 (4)Damper spring setting: DL
----------
K=14 RAL=15+0.2mm N1=950r/min N2=400r/min DL=7.7+-0.1mm
----------

Speed control lever angle

Test data 101695-3010
F:Full speed I:Idle S:Stop
----------

----------
a=(8deg)+-5deg b=32deg+-3deg c=(29deg)+-5deg

Timing setting

Test data 101695-3010
(1)Pump vertical direction (2)Coupling's key groove position at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(30deg)




Have questions with 101695-3010?





Group cross 101695-3010 ZEXEL

Komatsu 

9 400 616 087 
6207711391 
INJECTION-PUMP ASSEMBLY
S6D95L
101695-3010  
9 400 616 088 
6207711243 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 611 333 
6207711271 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 611 611 
6207711221 
INJECTION-PUMP ASSEMBLY
S6D95L
 
6207711263 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 612 333 
6207711211 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 616 089 
6207721261 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 616 090 
6207711335 
INJECTION-PUMP ASSEMBLY
S6D95L
9 400 616 091 
6207711941 
INJECTION-PUMP ASSEMBLY
S6D95L
F 019 Z10 613 
 
INJECTION-PUMP ASSEMBLY

Komatsu 

9 400 612 622 
6207711381 
INJECTION-PUMP ASSEMBLY
S6D95L
Back to top