Fuel injectors
  1. Home
  2. injection
  3. #1016939810

101693-9810 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016939810 16713z6062


101693-9810 INJECTION-PUMP ASSEMBLY
Rating:
17
Buy INJECTION-PUMP ASSEMBLY 101693-9810 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101693-9810 1016939810
NISSAN-DIESEL 16713Z6062 16713z6062

Service parts 101693-9810 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-3660
3. GOVERNOR 105921-6800
4. SUPPLY PUMP 105220-7050
5. AUTOM. ADVANCE MECHANIS 105614-3321
6. COUPLING PLATE 105661-0401
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-5630
11. Nozzle and Holder 16600-Z5570
12. Open Pre:MPa(Kqf/cm2) 21.6{220}
13. NOZZLE-HOLDER 105031-4650
14. NOZZLE 105015-7370
15. NOZZLE SET

Include in #1:

101693-9810 as INJECTION-PUMP ASSEMBLY
106691-2100 as _

Cross reference number

ZEXEL 101693-9810 1016939810
NISSAN-DIESEL 16713Z6062 16713z6062


Zexel num
Bosch num
Firm num
Name
101693-9810 
 
16713Z6062  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil   ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm) mm   6-2-600
Overflow valve   131424-1520
Overflow valve opening pressure kPa   157 123 191
Overflow valve opening pressure kgf/cm2   1.6 1.25 1.95
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right   R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right   R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.4 3.35 3.45
Beginning of injection position
Drive side   NO.1
Difference between angles 1
Cal 1-4 deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2 deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6 deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3 deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5 deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   12.5
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   83.7 82.1 85.3
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   300 300 300
Average injection quantity mm3/st.   9.5 7.7 11.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(12.5)
Pump speed r/min   1500 1500 1500
Average injection quantity mm3/st.   83.7 82.7 84.7
Basic   *
Fixing the lever   *
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1-0.55
Pump speed r/min   900 900 900
Average injection quantity mm3/st.   68.7 66.7 70.7
Fixing the lever   *
Injection quantity adjustment_05
Adjusting point   I
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   85 85 105
Fixing the lever   *
Rack limit   *
Timer adjustment
Pump speed r/min   1050--
Advance angle deg.   0 0 0
Remarks
Start  
Timer adjustment_02
Pump speed r/min   1000
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1500
Advance angle deg.   2 1.5 2.5
Remarks
Finish  

Test data Ex:

Governor adjustment

Test data 101693-9810
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT
----------
T1=C35
----------

Speed control lever angle

Test data 101693-9810
F:Full speed I:Idle (1)Use the hole at R = aa (2)Stopper bolt set position 'H'
----------
aa=100mm
----------
a=26.5deg+-5deg b=39deg+-3deg

Stop lever angle

Test data 101693-9810
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

Test data 101693-9810
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101693-9810?





Group cross 101693-9810 ZEXEL

101693-9800  

101693-9801 
F 019 Z10 846 
 
INJECTION-PUMP ASSEMBLY

Nissan-Diesel 

101693-9801  
9 400 610 794 
16713Z6063 
INJECTION-PUMP ASSEMBLY
FE6T
101693-9810  
 
16713Z6062 
INJECTION-PUMP ASSEMBLY
FE6T
101693-9820  
9 400 616 078 
16713Z6078 
INJECTION-PUMP ASSEMBLY
FE6T
101693-9830  
 
16713Z6107 
INJECTION-PUMP ASSEMBLY
FE6T
101693-9840  

101697-9140 
9 400 610 333 
1671395208 
INJECTION-PUMP ASSEMBLY
NE6T
101693-9850  

101696-9040 
9 400 616 079 
16713Z6066 
INJECTION-PUMP ASSEMBLY
FE6T
101693-9860  

101696-9110 
9 400 616 080 
16713Z6067 
INJECTION-PUMP ASSEMBLY
FE6TA
101693-9870  

101696-9130 
9 400 616 081 
16713Z6068 
INJECTION-PUMP ASSEMBLY
FE6TB
101693-9880  

101693-9920 
 
16713Z6071 
INJECTION-PUMP ASSEMBLY
FE6T
101693-9890  

101693-9930 
 
16713Z6072 
INJECTION-PUMP ASSEMBLY
FE6TA
Back to top