101693-9660 ZEXEL INJECTION-PUMP ASSEMBLY Calibration Data 1016939660 16713z5978


101693-9660 INJECTION-PUMP ASSEMBLY
Rating:
77
Buy INJECTION-PUMP ASSEMBLY 101693-9660 zexel genuine, new aftermarket engine parts with delivery

Information injection-pump assembly

ZEXEL 101693-9660 1016939660
NISSAN-DIESEL 16713Z5978 16713z5978

Service parts 101693-9660 INJECTION-PUMP ASSEMBLY:

1. _
2. FUEL INJECTION PUMP 101069-3940
3. GOVERNOR 105921-6380
4. SUPPLY PUMP 105220-7010
5. AUTOM. ADVANCE MECHANIS 105672-0290
6. COUPLING PLATE 105662-1380
7. COUPLING PLATE
8. _
9. _
10. NOZZLE AND HOLDER ASSY 105101-6740
11. Nozzle and Holder 16600-Z5607
12. Open Pre:MPa(Kqf/cm2) 19.6{200}
13. NOZZLE-HOLDER 105031-4650
14. NOZZLE 105015-9170
15. NOZZLE SET

Include in #1:

101693-9660 as INJECTION-PUMP ASSEMBLY

Cross reference number

ZEXEL 101693-9660 1016939660
NISSAN-DIESEL 16713Z5978 16713z5978


Zexel num
Bosch num
Firm num
Name
101693-9660 
101693-9850 
 
16713Z5978  NISSAN-DIESEL
INJECTION-PUMP ASSEMBLY
FE6T * K

Calibration Data:

Adjustment conditions
Test oil
1404 Test oil
  ISO4113 or {SAEJ967d}
Test oil temperature degC   40 40 45
Nozzle and nozzle holder   105780-8140
Bosch type code   EF8511/9A
Nozzle   105780-0000
Bosch type code   DN12SD12T
Nozzle holder   105780-2080
Bosch type code   EF8511/9
Opening pressure MPa   17.2
Opening pressure kgf/cm2   175
Injection pipe
Outer diameter - inner diameter - length (mm)
mm   6-2-600
Overflow valve   134424-1420
Overflow valve opening pressure kPa   162 147 177
Overflow valve opening pressure kgf/cm2   1.65 1.5 1.8
Tester oil delivery pressure kPa   157 157 157
Tester oil delivery pressure kgf/cm2   1.6 1.6 1.6
Direction of rotation (viewed from drive side)
Right
  R
Injection timing adjustment
Direction of rotation (viewed from drive side)
Right
  R
Injection order   1-4-2-6- 3-5
Pre-stroke mm   3.9 3.85 3.95
Beginning of injection position
Drive side
  NO.1
Difference between angles 1
Cal 1-4
deg.   60 59.5 60.5
Difference between angles 2
Cyl.1-2
deg.   120 119.5 120.5
Difference between angles 3
Cal 1-6
deg.   180 179.5 180.5
Difference between angles 4
Cal 1-3
deg.   240 239.5 240.5
Difference between angles 5
Cal 1-5
deg.   300 299.5 300.5
Injection quantity adjustment
Adjusting point   -
Rack position   13.1
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   94.8 92.8 96.8
Max. variation between cylinders %   0 -3.5 3.5
Basic   *
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_02
Adjusting point   H
Rack position   9.5+-0.5
Pump speed r/min   275 275 275
Average injection quantity mm3/st.   9.5 7.7 11.3
Max. variation between cylinders %   0 -10 10
Fixing the rack   *
Standard for adjustment of the maximum variation between cylinders   *
Injection quantity adjustment_03
Adjusting point   A
Rack position   R1(13.1)
Pump speed r/min   700 700 700
Average injection quantity mm3/st.   94.8 93.8 95.8
Basic   *
Fixing the lever   *
Boost pressure kPa   26.7 26.7
Boost pressure mmHg   200 200
Injection quantity adjustment_04
Adjusting point   B
Rack position   R1(13.1)
Pump speed r/min   1400 1400 1400
Average injection quantity mm3/st.   100.4 97.2 103.6
Fixing the lever   *
Boost pressure kPa   26.7 26.7
Boost pressure mmHg   200 200
Injection quantity adjustment_05
Adjusting point   C
Rack position   R2(R1-0. 2)
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   76.6 73.4 79.8
Fixing the lever   *
Boost pressure kPa   26.7 26.7
Boost pressure mmHg   200 200
Injection quantity adjustment_06
Adjusting point   D
Rack position   R2-1.05
Pump speed r/min   400 400 400
Average injection quantity mm3/st.   57.7 55.7 59.7
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Injection quantity adjustment_07
Adjusting point   I
Rack position   -
Pump speed r/min   150 150 150
Average injection quantity mm3/st.   85 85 105
Fixing the lever   *
Boost pressure kPa   0 0 0
Boost pressure mmHg   0 0 0
Rack limit   *
Boost compensator adjustment
Pump speed r/min   400 400 400
Rack position   R2-1.05
Boost pressure kPa   6.7 5.4 8
Boost pressure mmHg   50 40 60
Boost compensator adjustment_02
Pump speed r/min   400 400 400
Rack position   R2(R1-0. 2)
Boost pressure kPa   13.3 13.3 13.3
Boost pressure mmHg   100 100 100
Timer adjustment
Pump speed r/min   1170--
Advance angle deg.   0 0 0
Remarks
Start
 
Timer adjustment_02
Pump speed r/min   1120
Advance angle deg.   0.5
Timer adjustment_03
Pump speed r/min   1400
Advance angle deg.   3 2.5 3.5
Remarks
Finish
 

Test data Ex:

Governor adjustment

Test data 101693-9660
N:Pump speed R:Rack position (mm) (1)Torque cam stamping: T1 (2)Tolerance for racks not indicated: +-0.05mm. (3)RACK LIMIT (4)Boost compensator stroke: BCL
----------
T1=G99 BCL=1.05+-0.1mm
----------

Speed control lever angle

Test data 101693-9660
F:Full speed I:Idle (1)Stopper bolt set position 'H'
----------

----------
a=26.5deg+-5deg b=42deg+-3deg

Stop lever angle

Test data 101693-9660
N:Pump normal S:Stop the pump.
----------

----------
a=20deg+-5deg b=40deg+-5deg

Timing setting

Test data 101693-9660
(1)Pump vertical direction (2)Position of timer's threaded hole at No 1 cylinder's beginning of injection (3)- (4)-
----------

----------
a=(60deg)




Have questions with 101693-9660?





Group cross 101693-9660 ZEXEL

Nissan-Diesel 

 
16713Z5969 
INJECTION-PUMP ASSEMBLY
FE6T
 
16713Z5970 
INJECTION-PUMP ASSEMBLY
FE6TA
 
16713Z5971 
INJECTION-PUMP ASSEMBLY
FE6TB
 
16713Z5973 
INJECTION-PUMP ASSEMBLY
FE6T
 
16713Z5974 
INJECTION-PUMP ASSEMBLY
FE6TA
 
16713Z5975 
INJECTION-PUMP ASSEMBLY
FE6TB
101693-9660  

101693-9850 
 
16713Z5978 
INJECTION-PUMP ASSEMBLY
FE6T
 
16713Z5979 
INJECTION-PUMP ASSEMBLY
FE6TA
 
16713Z6000 
INJECTION-PUMP ASSEMBLY
FE6TB
 
16713Z6002 
INJECTION-PUMP ASSEMBLY
FE6T
Back to top